Westfalia Separator® seaprotectsolutions - ShipServ

Separation results oily water treatmentWith normal feed conditions, i.e.solids content: < 0.1 %chloride content: < 30,000 ppmpH: 6 – 9and no excessive oil emulsions in the water phase,the residual oil content in the clean water dischargeis 10 – 12 ppm. By using the adsorption filter in theclean water discharge the residual oil content can bedropped down below 5 ppm.BenefitsWater outlet less than 5 / 15 ppmReliableEasy handlingLow maintenance costSmall dimensionsLow weightQuick return on investmentTechnical data Westfalia Separator ® BilgeMaster ® 200Separator Type WTC 2Three-phase Power kW 1.1AC motor Speed at 50 Hz min-1 3000Speed at 60 Hz min-1 3600Centripetal Light liquid phase bar –pump Heavy liquid phase bar 0.5Capacity Effective throughput foroily water treatment l / h 200Weight Module complete kg 265Dimensions Length mm 900Width mm 725Height mm 120013GEA Westfalia Separator