safety data sheet araldite rapid resin - Toolbank

More documents

Recommendations

Info

S61P5ARALDITE RAPID RESIN2 / 6Revision 8Avoid release to the environment. Refer to special instructions/safety datasheets.Contains epoxy constituents. See information supplied by the manufacturer.2.3. Other hazardsSECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS3.2. MixturesBISPHENOL A-EPICHLOROHYDRIN EPOXY RESIN (NUMBER AV MW
Specific hazardsARALDITE RAPID RESINFire or high temperatures create: Toxic gases/vapours/fumes of: Carbon dioxide (CO2). Carbon monoxide (CO).3 / 6Revision 85.3. Advice for firefightersSpecial Fire Fighting ProceduresKeep run-off water out of sewers and water sources. Dike for water control. If risk of water pollution occurs, notify appropriate authorities.SECTION 6: ACCIDENTAL RELEASE MEASURES6.1. Personal precautions, protective equipment and emergency proceduresAvoid skin and eye contact. Ensure adequate ventilation.6.2. Environmental precautionsPrevent entry into drains and water courses.6.3. Methods and material for containment and cleaning upAbsorb in vermiculite, dry sand or earth and place into containers.6.4. Reference to other sectionsSECTION 7: HANDLING AND STORAGE7.1. Precautions for safe handlingAvoid spilling, skin and eye contact. Persons susceptible to allergic reactions should not handle this product. Ventilate well, avoidbreathing vapours. Use approved respirator if air contamination is above accepted level.7.2. Conditions for safe storage, including any incompatibilitiesStore in tightly closed original container in a dry, cool and well-ventilated place. Keep in original container.Storage ClassChemical storage.7.3. Specific end use(s)SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION8.1. Control parametersIngredient CommentsWEL = Workplace Exposure Limits8.2. Exposure controlsProtective equipmentEngineering measuresProvide adequate general and local exhaust ventilation.Respiratory equipmentNo specific recommendation made, but respiratory protection must be used if the general level exceeds the recommended occupationalexposure limit.Hand protectionProtective gloves should be used if there is a risk of direct contact or splash. Use protective gloves made of: Nitrile.Eye protectionWear splash-proof eye goggles to prevent any possibility of eye contact.Other ProtectionWear appropriate clothing to prevent any possibility of liquid contact and repeated or prolonged vapour contact. Provide eyewash station.
Page 1 and 2: Revision Date March 2013Revision 81
Page 3 and 4: Specific hazardsARALDITE RAPID RESI
Page 5 and 6: ARALDITE RAPID RESIN5 / 6Revision 8
Page 7: Revision Date March 2013Revision 81
Page 11 and 12: ARALDITE RAPID RESIN5 / 6Revision 8

safety data sheet araldite rapid resin - Toolbank

Create successful ePaper yourself

Delete template?

Save as template?