05.12.2012 Views

2112 VTEC-RPLA (English (GB)) MSDS - OXOID (BASINGSTOKE)

2112 VTEC-RPLA (English (GB)) MSDS - OXOID (BASINGSTOKE)

2112 VTEC-RPLA (English (GB)) MSDS - OXOID (BASINGSTOKE)

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Section 1. Chemical Product and Company Identification<br />

Product No.<br />

Trade name<br />

Manufacturer<br />

TD0960<br />

<strong>VTEC</strong>-<strong>RPLA</strong><br />

Date of issue - 20/08/2009.<br />

Oxoid Limited<br />

Wade Road<br />

Basingstoke<br />

Hants RG24 8PW<br />

ENGLAND<br />

Tel: + 44 (0)1256 841144<br />

Fax: + 44 (0)1256 463388<br />

Supplier Oxoid Limited<br />

Wade Road<br />

Basingstoke<br />

Hants RG24 8PW<br />

ENGLAND<br />

Tel: + 44 (0)1256 841144<br />

Fax: + 44 (0)1256 463388<br />

Section 2. Hazards Identification<br />

Most Important Hazards<br />

Section 3. Composition, Information on Ingredients<br />

Hazardous ingredients<br />

Section 4. First Aid Measures<br />

SAFETY DATA SHEET<br />

<strong>VTEC</strong>-<strong>RPLA</strong><br />

TD0960<br />

Not classified as hazardous. This product is for in vitro diagnostic use<br />

only.<br />

Specimen material may contain pathogenic organisms. Handle with<br />

the appropriate precautions.<br />

This preparation does not contain any substances presenting a health<br />

hazard within the meaning of the Dangerous Substances Directive<br />

67/548/EEC.<br />

First Aid - Eyes<br />

Wash out eye with plenty of water. Obtain medical attention if<br />

soreness or redness persists.<br />

First Aid - Skin Wash skin with soap and water.<br />

Section 5. Fire Fighting Measures<br />

Extinguishing Media - Suitable<br />

Section 6. Accidental Release Measures<br />

Not combustible.<br />

Personal Precautions Wear appropriate protective clothing.<br />

Spill Wipe up with a damp cloth. Finally flush area with plenty of water.<br />

Section 7. Handling and Storage<br />

Handling<br />

CM Version - 4<br />

For in vitro diagnostic use only.<br />

Avoid contact with eyes, skin and clothing.<br />

Standard laboratory guidelines for handling infectious agents and all<br />

chemical reagents supplied with the kit should be observed throughout<br />

all procedures.<br />

Patient specimens may contain infectious agents and should be<br />

handled and disposed of as potential biohazards.<br />

Page: 1/3


Storage<br />

Section 8. Exposure Controls, Personal Protection<br />

Protective Measures - Hands<br />

Date of issue - 20/08/2009.<br />

SAFETY DATA SHEET<br />

<strong>VTEC</strong>-<strong>RPLA</strong><br />

TD0960<br />

Storage temperature should be controlled to between 2 and 8 °C.<br />

Under these conditions the reagents will retain their reactivity until the<br />

date shown on the kit box. After reconsitution, the enterotoxin controls<br />

should be stored at 2 and 8 °C. Under these conditions, the<br />

reconsituted enterotoxin controls will retain their reactivity for 3 months,<br />

or until the date shown on the kit box, whichever is the sooner.<br />

Disposable vinyl gloves.<br />

Protective Measures - Eyes No specific measures necessary.<br />

Section 9. Physical and Chemical Properties<br />

Physical state<br />

Section 10. Stability and Reactivity<br />

Stability<br />

Section 11. Toxicological Information<br />

Acute toxicity<br />

Section 12. Ecological Information<br />

Ecotoxicity<br />

Section 13. Disposal Considerations<br />

TD961 Sensitised latex VT1: Latex suspension sensitised with specific<br />

antibodies (rabbit IgG) against E. coli verocytotoxin type 1.<br />

TD962 Sensitised latex VT2: Latex suspension sensitised with specific<br />

antibodies (rabbit IgG) against E. coli verocytotoxin type 2.<br />

TD963 Latex Control: Latex suspension sensitised with non-immune<br />

rabbit globulins.<br />

TD964 Verotoxin Control (VT1): Dried E. coli verocytotoxin type 1.<br />

TD965 Verotoxin Control (VT2): Dried E. coli verocytotoxin type 2.<br />

TD966 Diluent: Phosphate buffered saline<br />

Stable under normal conditions.<br />

Do not mix components from different lots.<br />

Do not use after stated expiry date.<br />

Low order of acute toxicity.<br />

No relevant studies identified.<br />

Disposal considerations<br />

Non-hazardous waste Dispose of according to all federal, state and<br />

local applicable regulations.<br />

Container information Labels should not be removed from containers until they have been<br />

cleaned. Contaminated containers must not be treated as household<br />

waste.<br />

Section 14. Transport Information<br />

UN :<br />

UN number<br />

Section 15. Regulatory Information<br />

Risk Phrases<br />

Safety Phrases<br />

Not classified.<br />

Not applicable.<br />

Not applicable.<br />

EC Classification This product is not classified according to the EU regulations.<br />

CM Version - 4<br />

Page: 2/3


Section 16. Other Information<br />

<strong>MSDS</strong> first issued<br />

<strong>MSDS</strong> data revised<br />

USES<br />

Revisions Highlighted<br />

Notes<br />

18/03/2002<br />

20/08/2009<br />

Date of issue - 20/08/2009.<br />

SAFETY DATA SHEET<br />

<strong>VTEC</strong>-<strong>RPLA</strong><br />

TD0960<br />

A reverse passive latex agglutination test for the detection of<br />

verocytotoxins VT1 and VT2 produced by Escherichia coli cultured from<br />

food and faecal samples.<br />

Date of issue<br />

Classification and labelling have been performed according to EU<br />

directives 67/548/EEC, 1999/45/EC, including amendments and the<br />

intended use.<br />

CM Version - 4 Page: 3/3

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!