TH255

-101020403060508070-101020304050607080-101020304050607080SPECIFICATIONSTH255 TelehandlerDimensionsAll dimensions are approximate. 1.92 m (75.6 in)TL255279 mm(11 in) 1.816 m (71.5 in) 2.286 m (90 in) 3.658 m (144.0 in)Load Chart and Dimensions24 ft (7.3 m)20 ft (6.1 m)16 ft (4.9 m)12 ft (3.7 m)8 ft (2.4 m)4 ft (1.2 m)0 ft (0 m)30°20°10°0°40°1,850 lb (839 kg)-4 ft (-1.2 m)16 ft 12 ft(4.9 m) (3.7 m)50°2,000 lb (907 kg)60°3,000 lb (1,361 kg)8 ft(2.4 m)70°4,400 lb (1,996 kg)4 ft(1.2 m)EDCBA0 ft(0 m)5,500 lb(2,495 kg)TL255TL255TL255IMPORTANTRated lift capacities shown are with machineequipped with carriage and pallet forks. Themachine must be level on a firm surface withundamaged, properly inflated tires. Machinespecifications and stability are based on ratedlift capacities at specific boom angles andboom lengths. (If specifications are critical, theproposed application should be discussed withyour dealer.)DO NOT exceed rated lift capacity loads, asunstable and dangerous machine conditionswill result.DO NOT tip the machine forward to determinethe allowable load.Use only JLG approved attachments withproper material handler model/attachmentload capacity charts displayed in theoperator’s cab. OSHA requires all roughterrain forklift operators be trainedaccording to OSHA 29 CFR 1910.178 (1).Due to continuous product improvements,machine specifications and/or equipmentchanges may be made without priornotification. This machine meets or exceedsANSI/ITSDF B56.6-2005 as originallymanufactured for intended applications.AEHQ5954Printed in U.S.A.© 2007 Caterpillar All rights reserved.www.cat.comCAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.