Avalon V4

AGFA GRAPHICSAvalon V4MODELS :AVALON V4-A :AVALON V4-MLaserOpticsResolutionsInterfacePLATE SIZEPLATESSCREENINGOPTIONSPlate thicknessImaging size (maximum)Approved Agfa GraphicsplatesTHROUGHPUTPlatesize745 x 605 mm (29.3 x 23.8”)PLATEHANDLING CONFIGURATIONSPlate loadingCassette capacityTechnologyInternal punchingPHYSICAL SPECIFICATIONSApprox. WeightPowerTemperature rangeHumidity rangeDimensions(W x D x H)Automatic loading(with interleaf paper removal)Manual loading50 platesExtra supply cassetteInternal Punch units600 kg (1320 lbs.)445 kg (979 lbs.)Single phase200 – 240V, 0.7 kW, 3,5 A1985 x 1394 x 1295 mm(78.2 x 54.9 x 51.0”)120 mW Violet laser (405 nm)6-facet polygon mirror1200, 2400, 3000 dpiF-PIF0.15 to 0.3 mm (.006 to .012”)Up to 575 x 754 mm (22.6 x 29.6”) Up to 575 x 760 mm (22.6 x 29.9”):Lithostar Ultra LAP-V / :Aspire / :Azura Vi36 pl/hour at 1200 dpi20 pl/hour at 2400 dpiup to :ABS 175 lpi at 2400 dpi23°C (73°F), ± 2°C,50 – 70% relative humidity28 pl/hour at 1200 dpi17 pl/hour at 12400 dpiManual loadingNoneInternal Punch units1985 x 984 x 1295 mm(78.2 x 38.8 x 51.0”)www.agfagraphics.com© Copyright 2012 by Agfa Graphics N.V. All rights rserved. Printed in Belgium. Agfa and the Agfa rhombus are registered trademarks of Agfa-Gevaert NV & Co KG.:Lithostar, :Aspire, :Azura, :Avalon, :Sublima, :ABS are trademarks of Agfa Graphics N.V.. All other brand and product names may be service marks, trademarks, orregistered trademarks of their respective owners. All product specifications are subject to change ithout notice. Appearance of equipment ordered may differ from thatequipment shown in photographs. NGTWZ GB 00201203