CraftMaster Molded Bifold Doors

Coventry Bifold 6´8´´
CraftMaster ®
Molded Bifold
Doors
6´8´´ , 7´0´´ and 8´0´´
We’re door people.
®
craftmasterdoors.com

We’re door people.
CraftMaster ® Molded Bifold Doors
Beautiful designs and solid construction make CraftMaster
Molded Bifolds a great value.
• Available in Colonist, Carrara, Coventry, Carmelle, Classique, Clermont, Cremona,
Caiman, Corvado, Crossmore, Cashal and Conmore.
• CMI recommends matching bifold facings, front and back, for all bifold constructions.
As shown by internal testing, this will lead to better performance as compared to
non-matching facing construction especially in high humidity environments.
• All doors are available primed with a low VOC primer and are ready to paint.
• Covered by a 5-year limited warranty.
Caiman Bifold 6´8´´
Molded 2-Side
1-1/8˝ x 1-1/8˝ MDF Stiles & Rails
A
C B
C
A. Rails - 2˝ MDF (before sizing)
B. Stiles - Center 1-7/8˝ Outside
1-1/8˝ (before sizing)
C. Corrugated Build-up Pads
D. Adhesive - PVA Water Resistant
Stanley BF 30 (2400 Series)
Hardware with 2007 Track, 2404
Roller Wheel Top Pivot and
2402 Top Pivot
BF 30-32
BF 30
CraftMaster Molded Bifold Doors 6´8´´, 7´0´´ and 8´0´´
2-Door Units 2´0´´— 3´0´´ 4-Door Units 4´0´´— 6´0´´
6´8´´ Molded Bifold Doors Available in all CraftMaster Door Designs.
2-Door Units 2´0´´— 3´0´´ 2-Door Units 4´0´´— 6´0´´
7´0´´ Molded Bifold Doors Available in Colonist, Carrara, Caiman, Coventry Smooth,
Corvado, Cremona, Crossmore, Cashal, and Conmore.
2-Door Units 2´0´´— 3´0´´ 4 -Door Units 4´0´´— 6´0´´
8´0´´ Molded Bifold Doors Available in Colonist, Carrara, Coventry Smooth,
Corvado, and Cashal.
Trimming CraftMaster molded interior doors may cause damage not covered under the warranty.
CONSTRUCTION Primed Faces, Primed Edges, Overall Panel Sizes: 1/4˝ under in
width, 78-7/8˝ in length (6´8˝)
HARDWARE Stanley BF 30 (2400)
BF 30-31
©2013 CraftMaster Manufacturing, Inc. (CMI). All rights reserved. All trademarks and service marks (registered and
unregistered) shown are owned by or licensed to CraftMaster Manufacturing, Inc. or its affiliates. 427 7/13
Contact Us
1.800.405.2233
craftmasterdoors.com
Green Benefits
Complies with CARB
No Added Urea
Formaldehyde
Certified Recycled
Content
Caiman ® Carmelle ® Carrara ® Cremona ® Clermont ® Colonist ® Corvado ® Crossmore ® Cashal ® Conmore ®
Coventry ® Classique ®
CraftMaster molded door designs (facings) meet Phase 2 of the California Air Resources
Board (CARB) Airborne Toxic Control Measure (ATCM) 93120.
CraftMaster molded door designs have no added
urea formaldehyde.
Passage Doors: All hollow core CraftMaster interior passage
doors contain a minimum of 25% pre-consumer recycled wood
fiber content.
Bifold Doors: All hollow core CraftMaster interior bifold doors
contain a minimum of 22% pre-consumer recycled wood
fiber content.
Molded Door Designs: CraftMaster molded door designs, a
component of CraftMaster interior doors, contain a minimum
of 35% pre-consumer recycled wood fiber content.
SCS-MC-01802
MINIMUM 25% RECYCLED CONTENT
PRE-CONSUMER
SCS-MC-03078
MINIMUM 22% RECYCLED CONTENT
PRE-CONSUMER
SCS-MC-03079
MINIMUM 35% RECYCLED CONTENT
PRE-CONSUMER
SCS-MC-03080