Guide For Tomatoes

Actigard Recommendations
for Tomatoes*
Target Diseases Use Rate Remarks
T O M AT O E S
Bacterial Speck
(Pseudomonas
syringae pv.
tomato)
Bacterial Spot
(Xanthomonas
campestris pv.
vesicatoria)
Ground Application:
0.33 oz./A with 30 to 50
GPA, 0 to 2 weeks after
transplanting
0.5 oz./A with 60 to 70
GPA, 3 to 4 weeks after
transplanting
0.75 oz./A with 70 to 100
GPA, 5 to 8 weeks after
transplanting
Air Application:
0.33 oz./A with a minimum
of 10 GPA, 0 to 2 weeks
after transplanting
0.5 oz./A with a minimum
of 10 GPA, 3 to 4 weeks
after transplanting
0.75 oz./A with a minimum
of 10 GPA, 5 to 8 weeks
after transplanting
Mixing Instructions:
For best results, use ground applications. Thoroughly clean spray equipment before using Actigard.
Vigorous agitation is necessary for proper dispersal. Maintain maximum agitation throughout the
spraying operation.
Actigard Alone:
Add 1 /2 of the required water to the mix tank. With the agitator running, add the Actigard to the
tank. Continue agitation while adding the remainder of the water. Begin application of the solution
after the Actigard has completely dispersed into the mix water. Maintain agitation until all of the
mixture has been applied.
Actigard + Tank Mixtures:
Growers should consult their dealer or Syngenta sales representative for information concerning
compatibility of other tank-mix partners.
Application Directions:
Make up to eight weekly, sequential applications. Begin the season with low water volumes.
As the plant canopy increases, the Actigard rate should increase to ensure activity.
*Please consult the Actigard product label for complete use directions.
A C T I G A R D
9