Versa-Pak

Model A B C D Inlet 24 28 32 37 42 47 10.75 (273.1) 11.00 (279.4) 11.25 (285.8) 11.50 (292.1) 11.75 (298.5) 12.00 (304.8) 2.25 (57.2) 2.50 (63.5) 2.75 (69.9) 3.00 (76.2) 3.25 (82.6) 3.50 (88.9) 4.88 (123.9) 5.00 (127.0) 5.12 (130.0) 5.25 (133.4) 5.38 (136.7) 5.50 (139.7) 9.32 (236.7) 9.58 (243.3) 9.80 (248.9) 10.06 (255.5) 10.32 (262.1) 10.56 (268.2) 1.50 1.50 2.00 2.00 2.00 2.00 TEST PORT SAE J1926/1:9/16-18 -6 ORB 3.81 (96.77) D OUTLET PORT 1.25 SPLIT FLANGE SAE J518, CODE 61 .25 (6.35) BYPASS PORT 1.25 SPLIT FLANGE SAE J518, CODE 61 3.97 (100.8) Installation Dimensions Inches (MM) 01.25 (31.75) .31 (7.87) 3.75 (95.25) 4.83 (122.68) 5.12 (130.04) ROTATION TEST PORT SAE J1926/1:9/16-18 -6 ORB INLET PORT SPLIT FLANGE SAE J518, CODE 61 SEE TABLE FOR SIZE 2.88 (73.15) 2 PLACES 2.25 (57.15) 2 PLACES 0.56 (14.22) 4 PLACES 2.19 (55.62) 3.75 (95.25) .50 (12.7) B A 2.00 (50.8) 2.75 (69.85) 2.88 (73.15) 2 PLACES 2.25 (57.15) 2 PLACES 05.00 (127) 1.39 (35.30) 1.25 (31.75) 2.75 (69.85) 5.25 (133.35) SAE C 4 BOLT SHAFT END COVER-CODE 4C SAE C 1.25 DIAMETER GEAR SHAFT-CODE 0 CCW ROTATION SHOWN-CODE L C SOLENOID VALVE NORMALLY OPEN NON ADJUSTABLE RELIEF VALVE SET AT 3100 PSI (213.7 BAR) Shaft End Cover Options 4.18 (106.17) 2 PLACES 3.56 (90.42) 2 PLACES 2.38 (60.45) 2 PLACES 2.38 (60.45) 2 PLACES 1.77 (44.95) 2 PLACES 0.56 (14.22) 4 PLACES Shaft Option 2.19 (55.62) 1.77 (44.95) 2 PLACES 04.00 (101.6) 01.23 (31.24) 0.69 (17.52) 2 PLACES SAE C 2 BOLT-CODE 2C 05.00 (127) SAE B 4 BOLT-CODE 4B ANSI B92.1 30 INVOLUTE SPLINE FLAT ROOT SIDE FIT 12/24 DIAMETER PITCH 14 TOOTH, SAE C SPLINE-CODE 6 1500 Frost Rd. • P. O. Box 2068 • Streetsboro, OH 44241 Phone: 330-626-2801 • Fax: 330-626-2805 • e-mail: info@permco.com Check us out on the web: www.permco.com Permco TianJin Fluidpower Mfg. Co., Ltd. Fenghua Industrial Park 9th Avenue TEDA, China PC: 300457 Permco (TianJin) Hydraulics Inc., Ltd. 236 Jinbindadao Free Trade Zone • TianJin Port, China e-mail: technic@permcotj.com • www.permcotj.com Copyright © 2008 Permco, all rights reserved © Bulletin #08-FCA