optional extras for front end loaders - Catford Engineering

More documents

Recommendations

Info

OPTIONAL EXTRAS FOR FRONT END LOADERS No Control Valve Code FELEXNCV - using tractor breakaway for hydraulic power CREDIT DUE Quick Coupler Single Front Ram (This attachment allows for quick coupling of accessories in the Catford range.) Code FELEXQCS Quick Coupler Twin Front Rams Code FELEXQCTFR Hydraulic in cab hook up for attachment quick coupler using tractor remotes Code FELEXICHU Arm Removable Kit, includes welded on lugs for overhead gantry Handles on pins for removal, side ram flat bar brackets with breakaway couplings. CodeFELEXARK1 Arm Removable Kit, same as above - extra drop down legs under arms Complete with breakaway couplings. Code FELEXARKL OPTIONAL EXTRAS FOR FRONT END LOADERS
Extra Dump Height (please state height) Code FELEXEDH For 2WD only - Section 5, 3" x 30" x 1 3/4" rod cylinders, instead of standard 2 1/2" x 30" x 1 1/2" rod Code FELEXS5RAM Grit blasting to Code 2 Australian Standards Code FELEXGB Two pack industrial paint – extra Code FELEX2PK 130 HP Plus - 2WD & 4WD (optional extra) to strengthen loader arms and under carriage Code FELEXSTR Anti-drop Valves 1 set per cylinder Code FELEXADV Anti-drop Valves on Arms & Bucket Cylinders (2 sets) Code FELEXADV2 Solid axle 9G, 306, C670, 236, 354 & C6100 Chamberlain Code FELEXSA Important notes on Ordering Front End Loader Some tractor models require modification or relocation of some tractor parts eg. Battery boxes, fuel tanks, tool boxes, exhaust, weights carriage, lights etc. The additional cost incurred in these modifications is the responsibility of the customer, and will be charged to the customer. Catford Engineering will not bear the modification cost. All orders must be confirmed in writing before production of the unit will commence. Orders not confirmed in this manner will be considered cancelled. Oil to top up the reservoir is to be supplied by the customer or will be charged as an additional cost. Some John Deere tractors require a special oil bowl to return the oil when a loader is fitted. These may be obtained from your local dealer or supplied by Catford Engineering at additional cost. Should a tractor require other valves to operate the front end loader (in addition to the standard spool) the work will be done at additional cost. (eg. A valve to combat sensing devices in the tractor hydraulic pump.) 02/2009
Page 1: OPTIONAL EXTRAS FOR FRONT END LOADE

optional extras for front end loaders - Catford Engineering

Create successful ePaper yourself

Delete template?

Save as template?