optional extras for front end loaders - Catford Engineering
optional extras for front end loaders - Catford Engineering
optional extras for front end loaders - Catford Engineering
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
OPTIONAL EXTRAS FOR FRONT END LOADERS<br />
Radiator Guard Code FELEXRG<br />
Safe Lift - Self-Levelling bucket and attachment lift (Hydraulic)<br />
Code FELEXSL<br />
Cable Operated Remote Control Code FELEXCORC<br />
If the position of the control levers is not specified when ordering, they will be<br />
placed in the most appropriate position ascertained by us. If alterations are<br />
necessary, they will be done at the clients cost.<br />
Twin Front Cylinders Code FELEXTFC<br />
One Flow Control Code FELEXFC<br />
Note – We recomm<strong>end</strong> flow controls should be fitted on all <strong>front</strong>-<strong>end</strong> <strong>loaders</strong><br />
to prevent air getting into the cylinders which can be caused when gravity<br />
overtakes the pump when lowering the arms or emptying the bucket.<br />
Continual use can cause burnt piston seals.<br />
Two Flow Controls (Arm & Bucket Rams) Code FELEXFC2<br />
Breakaway Couplings Code FELEXBC<br />
Three Way Control Valve. Code FELEXTWCV .<br />
Return Line Filter Code FELEXRLF<br />
A return line filter is recomm<strong>end</strong>ed on all Chamberlain tractors.<br />
If installing a return line filter, a flow control must be fitted also.
OPTIONAL EXTRAS FOR FRONT END LOADERS<br />
No Control Valve Code FELEXNCV<br />
- using tractor breakaway <strong>for</strong> hydraulic power<br />
CREDIT DUE<br />
Quick Coupler Single Front Ram (This attachment allows <strong>for</strong> quick<br />
coupling of accessories in the Cat<strong>for</strong>d range.) Code FELEXQCS<br />
Quick Coupler Twin Front Rams Code FELEXQCTFR<br />
Hydraulic in cab hook up <strong>for</strong> attachment quick coupler<br />
using tractor remotes Code FELEXICHU<br />
Arm Removable Kit, includes welded on lugs <strong>for</strong> overhead gantry<br />
Handles on pins <strong>for</strong> removal, side ram flat bar brackets with breakaway couplings.<br />
CodeFELEXARK1<br />
Arm Removable Kit, same as above - extra drop down legs under arms<br />
Complete with breakaway couplings.<br />
Code FELEXARKL<br />
OPTIONAL EXTRAS FOR FRONT END LOADERS
Extra Dump Height (please state height) Code FELEXEDH<br />
For 2WD only - Section 5, 3" x 30" x 1 3/4" rod cylinders,<br />
instead of standard 2 1/2" x 30" x 1 1/2" rod Code FELEXS5RAM<br />
Grit blasting to Code 2 Australian Standards Code FELEXGB<br />
Two pack industrial paint – extra Code FELEX2PK<br />
130 HP Plus - 2WD & 4WD (<strong>optional</strong> extra) to strengthen loader arms<br />
and under carriage Code FELEXSTR<br />
Anti-drop Valves 1 set per cylinder<br />
Code FELEXADV<br />
Anti-drop Valves on Arms & Bucket Cylinders (2 sets)<br />
Code FELEXADV2<br />
Solid axle 9G, 306, C670, 236, 354 & C6100 Chamberlain<br />
Code FELEXSA<br />
Important notes on Ordering Front End Loader<br />
Some tractor models require modification or relocation of some tractor parts eg. Battery<br />
boxes, fuel tanks, tool boxes, exhaust, weights carriage, lights etc. The additional cost<br />
incurred in these modifications is the responsibility of the customer, and will be charged to<br />
the customer. Cat<strong>for</strong>d <strong>Engineering</strong> will not bear the modification cost.<br />
All orders must be confirmed in writing be<strong>for</strong>e production of the unit will commence.<br />
Orders not confirmed in this manner will be considered cancelled.<br />
Oil to top up the reservoir is to be supplied by the customer or will be charged as an<br />
additional cost.<br />
Some John Deere tractors require a special oil bowl to return the oil when a loader is fitted.<br />
These may be obtained from your local dealer or supplied by Cat<strong>for</strong>d <strong>Engineering</strong> at<br />
additional cost.<br />
Should a tractor require other valves to operate the <strong>front</strong> <strong>end</strong> loader (in addition to the<br />
standard spool) the work will be done at additional cost. (eg. A valve to combat sensing<br />
devices in the tractor hydraulic pump.)<br />
02/2009