09.09.2015 Views

simatic s7-300 - megaelektrik.net

simatic s7-300 - megaelektrik.net

simatic s7-300 - megaelektrik.net

SHOW MORE
SHOW LESS
  • No tags were found...

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

SIMATIC S7-<strong>300</strong><br />

Digital modules<br />

SM 323/SM 327 digital input/output modules<br />

■ Technical specifications (continued)<br />

6ES7 323-1BH01-0AA0 6ES7 323-1BL00-0AA0 6ES7 327-1BH00-0AB0<br />

Digital outputs<br />

• Number of digital outputs 8 16 8; also parameterizable<br />

individually as DI<br />

• Length of cable shielded, max. 1,000 m 1,000 m 1,000 m<br />

• Length of cable unshielded, max. 600 m 600 m 600 m<br />

• Short-circuit protection of the Yes; electronic Yes; electronic Yes; electronic<br />

output<br />

• Short-circuit protection of the output,<br />

1,0 A<br />

response threshold, typical<br />

• Limitation of voltage induced on L+ (-53 V) L+ (-48 V) L+ (-54 V)<br />

circuit interruption to<br />

• Lamp load, max. 5 W 5 W 5 W<br />

• Driving a digital input Yes Yes Yes<br />

Output voltage<br />

- for 1 signal L+ (-0.8 V) L+ (-0.8 V) L+ (-1.5 V)<br />

Output current<br />

- for 1 signal rated value 0.5 A 0.5 A 0.5 A<br />

- for 1 signal permissible range<br />

for 0 to 60 °C, min.<br />

5 mA<br />

- for 1 signal permissible range<br />

0.6 A<br />

for 0 to 60 °C, max.<br />

- for 1 signal minimum load<br />

current<br />

5 mA 5 mA<br />

- for 0 signal residual current, max. 0.5 mA 0.5 mA 0.5 mA<br />

Output delay at resistive load<br />

- "0" to "1", max. 100 µs 100 µs 350 µs<br />

- "1" to "0", max. 500 µs 500 µs 500 µs<br />

Parallel switching of 2 outputs<br />

- to increase power No No No<br />

- to redundantly drive a load<br />

Yes; only outputs of the same<br />

group<br />

Yes; only outputs of the same<br />

group<br />

Switching frequency<br />

- at resistive load, max. 100 Hz 100 Hz 100 Hz<br />

- at inductive load, max. 0.5 Hz 0.5 Hz 0.5 Hz<br />

- at lamp load, max. 10 Hz 100 Hz 10 Hz<br />

Summation current of the outputs<br />

(per group)<br />

• vertical mounting positions<br />

- up to 40°C., max. 4 A 2 A 2 A<br />

• horizontal mounting positions<br />

- up to 40°C., max. 4 A 4 A<br />

- up to 60°C., max. 4 A 3 A 3 A<br />

Load impedance range<br />

- lower limit 48 Ω 48 Ω 48 Ω<br />

- upper limit 4 kΩ 4 kΩ 4 kΩ<br />

Sensor<br />

Connectable encoders<br />

- 2-wire BEROS Yes Yes Yes<br />

- permissible closed-circuit current<br />

(2-wire BEROS), max.<br />

2 mA 1.5 mA 1.5 mA<br />

Status information/<br />

interrupts/ diagnostics<br />

Interrupts<br />

- Interrupts No No No<br />

Diagnostics<br />

- Diagnostic functions No No No<br />

Yes; only outputs of the same<br />

group<br />

4<br />

Siemens ST 70 · 2005<br />

4/53

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!