Quality Tools! - Australian Gas & Industrial Supplies
Quality Tools! - Australian Gas & Industrial Supplies
Quality Tools! - Australian Gas & Industrial Supplies
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Portable Magnetic Drilling Machines<br />
HF-35<br />
HF-30A<br />
BS-7L Metal Cutting Band Saw<br />
• 305 x 178mm rectangular capacity<br />
• Heavy-duty 0.56kW / 3/4hp 240V motor<br />
• Adjustable hydraulic feed cutting rate<br />
• Mitre cuts to 45º using calibrated vice<br />
• Wire wheel brush to clean swarf from blade<br />
• Built-in coolant system<br />
• Adjustable blade roller guides<br />
• Adjustable 4-speed pulley drive system<br />
• 1100W, 240V motor<br />
• Magnetic holding strength 1529kg/f<br />
• CE approved<br />
Features: HF-35<br />
• Drills up to 35mm diameter through 50mm plate<br />
• Sturdy feed handles<br />
• Includes drill chuck and adaptor for easy<br />
conversion to use twist drills up to 12mm diameter<br />
Features: HF-30A<br />
• Drills up to 30mm diameter through 50mm plate<br />
in the auto mode & up to 35mm with manual feed<br />
• Can be used in manual feed only with drill chuck<br />
• 3 speed feed motor<br />
AL-336D Centre Lathe<br />
• 2-Axis digital read out system<br />
• Gear drive headstock<br />
• Precision ‘V’-beds are hardened and ground<br />
• Foot operated spindle brake with safety cut out<br />
• 18 spindle speeds 65-1810rpm<br />
• Powered longitudinal and cross feeds<br />
• Removable gap bed-way<br />
• Enclosed quick action gearbox<br />
• 300mm swing • 900mm distance b/c<br />
• 38mm spindle bore • 1.5kW / 2hp, 240V motor<br />
22<br />
TOOLS 4 INDUSTRY<br />
HM-50 Turret Milling Machine<br />
• 2-Axis digital read out system<br />
• Metric dial graduations @ 0.02mm<br />
• Vertical dial graduations on hand wheel @ 0.05mm<br />
• Includes coolant system, swarf / splash tray & light<br />
• Precision-ground dovetail slides<br />
• Tilting head ±90º left to right<br />
• Fine hand wheel operated<br />
quill feed<br />
• Spindle taper 30NT<br />
• X-Axis Travel 600mm<br />
• Y-Axis Travel 220mm<br />
• Z-Axis Travel 340mm<br />
• 1.5kW / 2hp, 240V motor<br />
• Spindle speeds<br />
220-2400rpm<br />
HM-50 INCLUDE<br />
THESE<br />
ACCESSORIES:<br />
www.t4i.com.au