Quality Tools! - Australian Gas & Industrial Supplies

PHP52P 1040LPM Petrol Industrial 

Compressor (00099) 

• Free Air Delivery @ 150PSI: 1040LPM 

• 13HP Honda engine • Pump RPM: 1020 

• Two stage – max PSI 175 • 150 litre air receiver 

• 3 cylinder, slow revving, cast iron pumps 

Warranty: 1 year pump, 3 year Honda 

PHP15FB 300LPM Fatboy 



• 3.2HP, single phase – 15Amp motor 

• Pump RPM: 1132 • Two stage – max PSI 175 

• 3 cylinder, slow revving, cast iron pumps 

• 110 litre air receiver 

Warranty: 5 Year Pump, 1 Year Motor 

PEERLESS WILL MANUFACTURE A COMPRESSOR TO YOUR SPECIFIC REQUIREMENTS 

PV25 545LPM Industrial 3 Phase 



• 5.5HP 3 phase motor • Pump RPM: 1154 

• 2 cylinder, slow revving, cast iron pump 


Warranty: 3 Year Pump, 1 Year Motor 

PV25PFB 545LPM Petrol Fatboy 



• 9HP Honda engine • Pump RPM: 1158 



Warranty: 3 year pump, 3 year Honda 

2 

• PERSONAL SERVICE • THE RIGHT PRICE • NATIONAL BRANDS • EXPERTISE • RANGE •

PHP52 

990LPM Industrial 3 Phase 



• 10HP 3 phase motor • Pump RPM: 949 

• 2 stage – max PSI 175 • 190 litre air receiver 


Warranty: 1 year total unit 

PSS52 

Silent Compressor (00113) 

• Free Air Delivery @ 150 PSI: 900LPM 

• 10HP 3 phase motor • Pump RPM: 949 

• Low DB of 53 • Stationary 

Warranty: 1 Year Total Unit 

PEERLESS STOCK A LARGE RANGE OF COMPRESSORS UP TO 3,700LPM (130CFM) 

PLEASE NOTE: 

Freight charges may 

apply in some areas 

2020P 

Pedestal Drill 

(00295) 

• Heavy duty floor mount 

drill complete with 

engineers table & light 

• 1 1/2HP motor 

• 20mm Chuck 

• 3 Morse Taper 

• 432mm Swing 

• Drill Hole size 3 -18mm 

Warranty: 3 years 

00123 

CSA 15/8 

Rotary 

Screw 

Compressor 

(00123) 

• Free Air Delivery @115PSI: 1613LPM 

• 15HP 3 Phase Motor • 23.5 Amps Draw 

• Low Noise Level 63 DB • Requires DLX18 Dryer 

• Ideal for 3-10 Man Workshops 

Warranty: 1 Year Total Unit 

3

9911H 20kg Grease Kit 

• Spool valve air motor design requires minimum 

maintenance and results in fewer pump failures 

• 50:1 ratio grease pump develops grease pressures up to 7,500psi 

• Single shot or continuous flow handpiece provides 

greater lubrication options 

• Mostly all that is required to undertake repairs is 5 minutes 

and a screwdriver facilitating substantial savings in cost 

labour and downtime 

• Quiet operation cuts noise levels by up to 30% 

• Free of external aluminium components, the 9611HS is 

suitable for use in underground coal mines 

Beka Max 20 

Automatic Grease Lubrication System 

• Complete kit to service 20 grease points automatically 

• Includes a Beka Max 24vdc pump station with onboard timer 

and 4kg grease reservoir, 70m of grease filled hose, 

reusable hose ends, compression fittings and adaptors, 

nuts and bolts, cable ties and protective hose wrapping 

• System suitable for use with NLGI2 greases 

• Working life of fixed plant and mobile equipment 

is extended significantly 

Spill Containers 

• 100% recyclable polyethylene construction 

• Non-skid removable deck 

• Compatible with most fork lifts and pallet trucks 

• Help to create an OH&S compliant work place environment 

SJ-100-002 - 2 drum spill container 

• 750mm (L) x 1300mm (W) x 400mm (H) 

• Sump capacity of 236L • Weight of 20kg 

SJ-100-006 - 4 drum spill container 

• 1290mm (L) x 1380mm (W) x 280mm (H) 

• Sump capacity of 242L • Weight of 30kg 

4 • PERSONAL SERVICE • THE RIGHT PRICE • NATIONAL BRANDS • EXPERTISE • RANGE •

505201 

Spring Rewind 

Oil Hose Reel 

• Dual pedestal, high 

volume, spring rewind 

hose reel 

• All metal, heavy duty, 

reinforced construction 

• Includes 15 metres of 20mm 

ID (3/4”) delivery hose and 

0.8 metre lead in hose 

8080-G 

Heavy Duty Air, 

Water, Oil and 

Fuel Hose Reel 

• 15m x 25mm ID (1”) hose 

• Easy and quick mounting 

• Lifetime warranty on the 

hose guide assembly 

and latch pawl spring 

ALSO AVAILABLE 

8082-G High Capacity Air, Water, Oil & Fuel Grease 

Hose Reel with 15m x 40mm ID (1-1/2”) hose 

660AN 

Trigger 

Action 

Grease Gun 

• Coarse thread on 

barrel assembly 

• Twin Lock System 

• Patented 

Ever-Flow System 

• Delivers up to 1.00cc of 

grease per stroke 

• High volume/high pressure 

M150S 

Heavy Duty 12V 

Diesel Fuel 

Drum Pump 

• Flow rates of 

up to 56LPM 

• Total lift of up 

to 7.6 metres 

• Duty cycle of 30 minutes on and 30 minutes off 

• Suitable for diesel fuel transfer only 

ALSO AVAILABLE M150SA with automatic nozzle 

GPI High Volume 

Diesel Fuel Drum Pumps 

• Includes 6.5 metres of antistatic delivery hose 

• Dry prime of 4.6 metres • 12V, 35 amp draw 

• Maximum discharge lift capacity of 3 metres 

• Suitable for diesel fuel transfer only 

Part Number Max. Flow Nozzle 

M3025-ML 95 Manual 

M3025-AL 85 Auto 

PLEASE NOTE: 

Freight charges 

may apply in 

some areas 

201350 Electric Drum Pump Kit 

for AdBlue 

• Flow rates of up to 25LPM • 2900 rpm 

• 240V electric motor with on-off switch 

• Consists of a base, 240V pump, manual nozzle, 

4 metres of delivery hose and a suction hose 

complete with quick connector 

• Ideal for AdBlue transfer 

applications in 

transport, 

agriculture 

and industry 

5

A NETWORK OF OVER 100 QUALITY BRANDS 

STOPT A P E S 


Quality Tools! 

Socket Set 26 Piece 

Imperial & Metric 3/4” SQ. DRIVE 

• Chrome Vanadium Steel 

• 22 Sockets • 4 Accessories 

• Box Dimensions: 540 x 180 x 80mm • Part No P2027 

Trolley Jack 5 Ton Hydraulic Truck Jack 

Complies with ANSI Standard 

• Heavy Duty • Ideal for Heavy Vehicles and Trucks 

• Lifting Range: 140 - 560mm • Weight: 90Kg 

• Part No K12065 

Trolley Jack 10 Ton Hydraulic Truck Jack 

Complies with ANSI Standard 

• Heavy Duty • Ideal for Heavy Vehicles and Trucks 

• Lifting Range: 170 - 570mm • Weight: 135Kg • Part No K12066 

Shop Press 6 Ton 

Meets AS/NZS Standards 

• 3 Position Cross Beam • 2 Base Plates 

• Dimensions: 450 x 400 x 950mm 

• Weight: 30Kg • Part No K12090 











7

Buy a selected Bailey ladder or scaffolding product 

at Australian Industrial Supplies and... 

You could win 1 of 3 

Panasonic 42'' 

Plasma Televisions! 

Each TV 

valued at 

$ 

1500 

AUSTRALIA’S 

LADDER 

BRAND 

# 

1 

Puchase a selected* Bailey ladder or scaffolding 

product from your local AIS store and fill in the entry 

form in-store and tell us in 25 words or less why you 

chose Bailey. Promotion valid 1st April to 30 September 

2010. For full Terms and Conditions see the entry form. 

Eligible products: FS1020-26, FS13223-29 FS10863-70, FS10880-88, 

FS10631, FS10632, FS10666, FS13312, FS13313, FS13320, FS13321. 

8

Professional Contractor 

Platform Stepladders 

• Punchlock® design for 

additional torsional rigidity 

• Optional retractable wheels 

• 150kg Heavy Duty 

Industrial Load Rating 

• Multi-function handrail/ 

accessories holder 

• Wide anti-slip platform 

• 900mm handrail height 

from platform 

• 150kg load rating 

• Available 2 Step 

to 8 Step 

• Australian made and 

Australian owned 

Fibreglass and Aluminium 

Platform Step Ladders 

• Designed for electrical tradespeople 

to comply with new ‘Working at 

Heights’ legislation - Electro-Safe 

• Wide non slip platform made from 

tough reinforced fibreglass 

• Multi-function (polypropylene) 

handrail/accessories holder 

(900mm from platform) 

• Bailey’s Punchlock® design 

resists twisting and ladder walk 

• 150kg load rating 

• Available from 2 

to 8 Step 



Mini RiseTM 

Mobile Scaffolding System 

• 225kg W.L.L (2 person) 

• Wide and stable working platform 

up to a maximum height of 3.7m 

• Fully welded 

construction 

using tough T6 

Aluminum 

• Registered 

Design by Victorian 

Work Cover 

Reg # V0320131 

• Super quick set 

up and pull down 

time (2mins) 

• Australian made 

and Australian 

owned 

Code 

FS10631 

FS10632 

FS10666 

Description 

Base Pack 

Extension Pack 

Guardrail Pack 

Deluxe Order Pickers 

• For high frequency stock 

picking applications 

• Automatic retracting wheel 

system – easy to move 

• 900mm high hand rails 

with safety gate included 

• 150kg Load Rating 

• Available from 3 to 14 12 Step 



Standard Order Pickers 

• For moderate stock picking 

• Spring loaded castors – 

manoeuvrable and easy to use 

• 900mm high handrail for 

added safety 

• 130kg Load Rating 

• Available from 3 to 12 Step 



PLEASE NOTE: Freight charges may apply in some areas 

9

A WIDE RANGE OF CATEGORIES 

Abrasives 

Air Tools & 

Abrasives Air Tools & 




Bearings & Power 

Air Tools & Compressors Abrasives Building & Stel Air Materials Tools & Compressors 

Cleaners & Solvents 

es Air Tools & Compressors Building & Stel MaterialsTransmissions 


Cutting Tools 


Abrasives Air Tools & Compressors Building & Stel Cleaners Cleaners & Solvents & Solvents 

Transmissions Transmissions 


Bearings Bearings & Power & 

esAbrasives Air Tools Air & Compressors Tools & Compressors Building & Building Stel Materials & Stel Materials 

Bearings Power & Power 

Abrasives Air Tools & Compressors Building & Stel Materials Cleaners Cleaners & Solvents Cleaners & Solvents & Solvents 

Transmissions Transmissions Transmissions 


Bearings Bearings & Power Bearings & Power & Power 


vesAbrasives Abrasives Air Tools Air & Compressors Tools Air & Compressors Tools & Building Compressors & Building Stel Materials & Building Stel Materials & Stel 

Bearings 

Materials Cleaners & Solvents Cleaners & Solvents 

ves Air Tools & Compressors Building & Stel Materials Transmissions & Bearings Power Bearings 

Abrasives Air Tools & Compressors Building & Stel Materials 

Transmissions & Power 

Cleaners & Solvents 

Transmissions & Power 

Abrasives Air Tools & Compressors Building & Stel Materials Cleaners Cleaners & Solvents Cleaners & Solvents & Solvents 

Bearings Transmissions & Power Transmissions Transmissions 



vesAbrasives Air Tools Air & Compressors Tools & Compressors Building & Building Stel Materials & Stel Materials Cleaners Cleaners & Solvents & Solvents 

Transmissions Transmissions 

Elect 

Elect 

Electr 

Elec 

Elect 

Electrical Fasteners Hand Tools 

ools Cutting Tools Electrical Electrical Fasteners Fasteners Hand Tools Hand Tools Hand Tools 

ools Cutting Tools Cutting Tools Electrical Electrical ElectricalFasteners Fasteners FastenersHand Tools Hand Tools Hand Tools 

Tools Cutting Tools Cutting Tools Electrical Electrical ElectricalFasteners Fasteners FastenersHand Tools Hand Tools Hand Tools 

Tools Cutting Tools Cutting Tools Electrical Electrical ElectricalFasteners Fasteners FastenersHand Tools Hand Tools Hand Tools 

ools Cutting Tools Electrical Electrical Fasteners Fasteners Hand Tools Hand Tools 

Hardware 

Hardware 

Hardware 

Hardware 

Hardware 

Hose & 

Hose & 

Hose & 

Hose & 

Hose & 

Hose & Fittings Industrial Ventilation Joining Materials 

reHardware Hose & Fittings Hose & Fittings Industrial Industrial Ventilation Ventilation & adhesives Joining Materials Joining Materials 

& adhesives & adhesives 

reHardwareHardware Hose & Fittings Hose & Fittings Hose & Industrial Fittings Ventilation Joining Materials 

Industrial Industrial Ventilation Joining Materials 

Ventilation Joining Materials 

& adhesives & adhesives Joining & adhesives Materials 

areHardwareHardware Hose & Fittings Hose & Fittings Hose & Industrial Fittings Industrial Ventilation Industrial Ventilation Ventilation Joining Materials Joining Materials Joining Materials 

areHardwareHardware Hose & Fittings Hose & Fittings Hose & Industrial Fittings Industrial Ventilation Industrial Ventilation Ventilation Joining & adhesives Materials Joining & adhesives Materials Joining & adhesives Materials 


are Hose & Fittings Industrial Ventilation Joining Materials 

& adhesives 

Hardware Hose & Fittings Industrial Ventilation Joining Materials 


Lubrication Equipment 





Mach 

& Acces 

Mach 

& Acces 

Machi 

& Acces Mach 

& Acce 

Mach 

& Acces 

t Machinery 

Materials Handling Measuring & Levelling 

ication uipment Equipment & Accessories Machinery Machinery Materials Materials Handling Handling Equipment Measuring Measuring & Levelling & Levelling 

& Accessories & Accessories 

Equipment 

uipment Machinery 

Equipment 

ication Lubrication Equipment Equipment Machinery Machinery 

Materials HandlingMaterials Measuring Handling Measuring & Levelling Measuring & Levelling & Levelling 

& Accessories & Accessories & Accessories 

Equipment Equipment Equipment 

rication quipment Lubrication Equipment Equipment Machinery Machinery Machinery 

& Materials HandlingMaterials Measuring Handling& Levelling Measuring 

Accessories & Accessories 

Measuring & Levelling 

quipment Lubrication Equipment Machinery Machinery 

Measuring & Levelling 

rication Equipment & Machinery Accessories Materials HandlingMaterials Measuring Handling Equipment Measuring & Levelling Equipment Measuring & Levelling Equipment & Levelling 

& Accessories & Accessories & Accessories 

rication 

Equipment Equipment 

quipment Equipment Machinery Machinery Materials Materials Handling Handling Measuring Measuring & Levelling Equipment & Levelling 

& Accessories & Accessories 

Equipment Equipment 

Paints & Spray 

Equipment 


Paints 

Equipment 

& Spray 

Paints Equipment & Spray 

Paints & Equipment Spray Equipment 


Equipment 

Power 

Power 

Power 

Power 

Power 

Power Tools Safety Tapes & packaging 

pray aints & Spray Power Tools Power Tools Safety Safety materials Tapes & packaging Tapes & packaging 

ent Equipment 

materials materials 

pray aints & Spray Paints & Spray 

Power Tools Power Tools Power ToolsSafety Safety Safety Tapes & packaging Tapes & packaging Tapes & packaging 

ent Equipment Equipment 

materials materials materials 

Paints pray & Spray Paints & Spray Power Tools Power Tools Power ToolsSafety Safety Safety Tapes & packaging Tapes & packaging Tapes & packaging 

Paints pray ent Equipment & Spray Paints Equipment & Spray Power Tools Power Tools Power ToolsSafety Safety Safety Tapes materials & packaging Tapes materials & packaging Tapes materials & packaging 

ent Equipment 

Tools 

materials 

materials 

Packaging 

pray aints 

Equipment 

& Spray 

materials 

Power Tools Power Tools Safety Safety Tapes & packaging Tapes & packaging 

ent Equipment 

materials materials 

Welding 

Welding 

Welding 

Welding 

Welding 

Workshop 

Workshop 

Workshop 

Workshop 

Workshop 

Workshop Equipment Workwear 

Other 

g Welding Workshop Workshop Equipment Equipment Workwear Workwear 

Other Other 

g Welding Welding 

Workshop Workshop Equipment 

Workshop Equipment Equipment Workwear Workwear Workwear Other Other Other 

ng Welding Welding Workshop Workshop Equipment Workshop Equipment Equipment Workwear Workwear Workwear Other Other Other 

ng Welding Welding Workshop Workshop Equipment Workshop Equipment Equipment Workwear Workwear Workwear Other Other Other 

g Welding Workshop Workshop Equipment Equipment Workwear Workwear 

Other Other 

Workwear Abrasives Bearings & Power Air Tools Transmissions 

& Compressors Building Construction & Stel Materials 

10 

Bearings 

Transm

RBDRAD 

AM/FM 

Quality 

Radio Headset 

• Lightweight, 

ergonomic 

operational controls 

• Hearing protection 

whilst listing to your 

favourite radio program 

• Powered by AA 

disposable batteries, 

300 hour run time 

VC107 

Faceshield 

with Chinguard 

• Australian made 

• High impact gloss browguard 

• Chinguard for extra protection 

• Ratchet adjustable headband 

• Visor provides low to high impact protection 

• Wide flare polycarbonate visor with chinguard 

PLEASE NOTE: 


may apply in 

some areas 

ZONE:3 

32db Earmuff 

• Great attentuation performance and still 

with a comfortable and slim fit 

• For extremely noisy environments such as 

construction work, airport ground crews, 

motor racing, drill hammering etc 

• Lightweight earmuff design 

• Optimised cushion pressure provides excellent 

balance between comfort and protection 

032173 

Profile Ready Pack - complete with 

mask, P2 filters and storage bag 

• The Profile is an advanced twin filter half mask 

respirator, it is perfectly balanced, user friendly, 

and modern in design 

• Size medium also available in Small (032170) and 

Large (032176) 

11

BBC-350-240V BBC Bricksaw 

• Heavy duty CMG 1.7kw motor 

• 350mm blade capacity for a 

maximum cutting depth of 125mm 

• Open back design allows 

longer length cutting 

• Mechanical water pump 

• Rugged all steel frame 

• Stay Level Cutting Head for 

operator visibility 

SIL-MS-35025 

Segmented Low Noise Blades - 

For Brick Saws 

General Purpose (Wet Application) 

The newly developed 15mm segmented blades are 

fine tuned to achieve the best cutting performance, 

the longest life and the greatest noise-damping 

effect whilst taking into account the specific 

requirements of each cutting application. 

• Special steel core reduces the noise output of the 

blade by approximately 15dBa. 

• Patent-pending gullet design to eliminate air 

trapping reducing the whistle effect. 

• 15mm segment height for excellent life. 

• Available in 350mm size. 


Norton BLAZE F980 Fibre Discs 

• The next generation of Ceramic Fibre Discs for metal working 

applications 

• Cut cooler and last longer than current generation of fibre discs 

• Lower total grinding cost on stainless steel, cobalt, chrome, 

inconel, titanium and other hard to grind materials. 

• Available from 100mm to 180mm disc sizes and C24 to C120 grits 

Norton SG BLAZE R980 belts for offhand 

and pressure assist applications 

The next generation of Ceramic Narrow Belts for 

metal removal 

Norton SG BLAZE R980 coated abrasive belts cut faster 

and have proven to provide significantly longer product 

life when compared to all existing and competitive 

abrasive belt products in the marketplace. 

ALL IN ONE 

One wheel for safe cutting, light grinding and polishing of 

structural steels, sheet metals and stainless steels 

• Safe cutting, light grinding and polishing with one single product 

• No more time loss due to machine or product changes 

• Low vibration; comfortable operation 

• Available in wheel size 100, 115 & 125mm 

PLEASE NOTE: 



Mega Inox Ultra Thin Cutting Wheels 

For cutting stainless steels and ferrous metals 

Flexovit Mega-Inox Ultra thin cutting off wheels are 

manufactured for optimum performance on stainless 

steel and ferrous metal. The wheels are made free of 

iron, sulphur and chlorine to assist in the prevention of 

contamination of the stainless steel surface after the 

cutting process. 

• Available from 100 to 230mm wheel sizes 

13

TOUGH, RELIABLE AND BUILT FOR AUSTRALIAN CONDITIONS 

MHD40E Water Transfer Pump 

(Diesel Powered / E-Start) 

Combining power and dependability, this pump features high 

pressure, high flow characteristics and is designed to last 

longer and work harder. 

• Powered by Honda GD411 diesel engine 

• Recoil / electric starting system for effortless starting 

• 4” inlet, 4” outlet, 34 m max. head, 1680 L/min max. flow rate 

LLP4.5 

5 kVA Lister Pack (E-Start) 

• 12V electric starting system 

• 16L fuel tank with contents gauge 

• Low oil pressure indicator 

• 12V starter battery with leads 

TP200/14/10HSR 7 kVA Workstation 

This 4 in 1 Unit is built for reliability and durability, 

it will handle almost anything you throw at it. 

• Powered by Honda GX390 engine 

• 200 Amp Welder, 7 kVA Generator 

• 14 cfm Compressor, 50L Air Tank Capacity 

• 12/24 Volts of DC Power 

TP15HSRE 15 kVA Generator (E-Start) 

You can’t go past this generator when serious power is needed 

for all round performance. It can run a wool press on the farm, 

a welder on a building site or a decent sized air conditioner – 

all with ease. 

• Powered by Honda GX670 V Twin Engine 

• Large 6.59 L fuel tank 


CP127-3 

Weldmatic 

Fabricator 

THE COMPLETE 

INDUSTRIAL 

MIG WELDING 

SOLUTION – 

400 Amps 

• Suits medium to 

heavy fabrication, 

including vehicle 

manufacture, ship building, 

aluminium and stainless steel 

construction and the full range of steel fabrication 

• 5kg and 15kg spool capacity 

• Made in Australia • 3 year Gold Shield warranty 

236001 

Vortex 

Welding 

Respirator 

with Digital Elite Black Helmet 

• Delivers protection from welding fumes and 

dust, particularly when using flux cored wire 

applications 

• Digital lens technology, with X-mode, suits 

out-of-position and outdoor applications 

• Two adjustable air flow settings 160 and 

200 litres/minute 

• Audible, vibration and visual alarm 

• Back harness for maximum operator safety 

• Lithium ion battery – charges in 3 hours 

NEW 

MR195500 

Miller X-Treme 

12VS Wirefeeder 

Taking portable welding to the extreme! 

• Consistent and precise wire feed 

• Duty cycle 425 Amps @ 60% 

• Soft arc feature provides consistent arc starting 

• Robust case design for onsite and dirty 

environments 

• Quick set-up • 3 year warranty 

MR907376003-1 

Miller Trailblazer 

302 Air Pak 

WELD – AIR - POWER 

• Powerful all-in-one welder/generator designed 

for repair and construction 

• Air compressor, welder and generator are all run 

with one engine, reducing emissions and reducing 

fuel consumption up to 50% 

• 13,000 watts of usable peak generator power 

• 26 CFM @ 150 psi of air at 100% duty cycle 

• 3 year warranty 


15

Powerline A3 Self-levelling 

Dual Grade Laser 

Powerline O132 

Optical Level 

Powerline XL5 

Crossline Laser 

Checkpoint Inclo-matic 

Digital Angle Measurer 

From 

16 

For the Trade Professional 

Rotational Laser Levels 

Superior accuracies: 1.5mm @ 30m 

5 Year Warranty - Lifetime on laser prism 

Fully calibrated and certified 

Optical Levels 

Superior magnification: 32x (1mm @ 1klm) 

5 Year Warranty - Lifetime on viewing optics 

Fully calibrated and certified 

Crossline & Dot Laser Levels 

5 beams 

7 beams with detector for outside use 

Self-levelling crosslines with multiple 

lines and detectors for outside use 

Angle Measurement 

Digital Angle Measurers & Digital levels 

Measurement 

Laser Distance Measurer 

Measuring Tapes 

Analogue & Digital Measuring Wheels 

Accessories 

Tripods and Staffs, Cut and Fill Rods 

Wall mounts 

The Laser Professionals since 1987 

Full Service Centre for all makes and models 

www.spoton.com.au

Heavy Duty Drill Sets 

RS4 

S8R / SM8R 

RS16 

Reduced Shank Drill Sets 

Reduced shank drills are designed to increase 

the drilling capacity of drill chucks. Reduced 

shank drills are notched to reduce the amount of 

thrust required to penetrate the work materials. 

These drills must be used with extreme care and 

run at recommended speeds. 

Set Description Case Pieces Item # 

RS4 5/8, 3/4, 7/8, 1 with 1/2” shanks Foam 4 333458 

RS4M 16.0, 18.0, 22.0, 25.0mm with 12.5mm shanks Foam 4 333472 

S8R 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1 with 1/2” shanks Plastic 8 191515 

SM8R 14.0, 15.0, 16.0, 16.5 18.0, 20.0, 22.0, 25.0 with 12.5mm shanks Plastic 8 191522 

RS16 

17/32, 9/16, 19/32, 5/8 21/32, 11/16, 23/32, 3/4, 25/32, 

13/16, 27/32, 7/8, 29/32, 15/16, 31/32, 1, with 1/2” shanks 

Plastic 16 401188 

Cobalt Drill Sets 

Cobalt HSS Heavy Duty Bits are 

designed for machine and hand drilling tough 

materials such as stainless steel. The special 

split point enables accurate positioning and 

less thrust when drilling. High abrasion and 

heat resistance allows them to retain their 

strength and hardness at higher temp. 

SM1CO 

SM2CO 

SM3CO 

Set Description Case Pieces Item # 

S1CO 1/16 - 1/4 x 64th 13 pce ABS 13 100258 

S2CO 1/16 - 3/8 x 64th 21 pce ABS 21 100265 

S3CO 1/16 - 1/2 x 64th 29 pce ABS 29 100272 

SM1CO 2.0 - 6.5mm x 0.5 10 pce ABS 10 122014 



www.sutton.com.au 

17

For a complete range of 

products and accessories 

visit your locally 

And remember if we don't have 

AUSTRALIAN GAS & 

INDUSTRIAL SUPPLIES 

Proprietor: Len Northmore 

LAWRENCE INDUSTRIAL 

& AUTO SUPPLIES 

Proprietor: Scott Lawrence 

18

quality, national brand 

at competitive pricing... 

owned AIS store. 

it in stock, we will get it for you! 

LACHLAN STEEL & 

INDUSTRIAL SUPPLIES 

Proprietor: Bob Griffiths 

SEDL 

AGENCIES 

Proprietor: Peter Sedl 

19

POWERPLUS II 350 

K32063-1-AUP 

• Ready-to-weld package 

• Infinitely variable voltage control 

• Diamond Core Technology ensures optimum 

performance, easy arc starting and delivers 

a stable arc across the entire welding range 

• Remote voltage and wire feed control on wire feeder – 

no need to return to power source to adjust 

• Swivel platform allows for 360 degree rotation of the wire 

feeder when mounted on the power source 

• Digital volt/amp meters for precise 

set up and easy adjustment 

• 4 roll drive roll system • 3-year warranty on parts and labour 

REDI-MIG PLUS 255C 

K32062-11 

• Ready-to-weld package 

• Wide 30-255 amp welding output 

• 12 Step voltage control 

• Spot welding timer - adjustable arc time 

for repetitive spot or tack welds 

• Roll on/roll off cylinder tray for easier 

and safer cylinder changes 

• Comprehensive welding guide takes the 

guess work out of set up 

• Simple, easy to use front panel controls 

• Tool-less design wire drive system that 

are both 5 and 15 kg spool compatible 

• 3-year warranty on parts and labour 


INVERTEC V145S 

V145S-STDPKG 

• Ready-to-Weld Package 

• Excellent arc characteristics for rutile, basic 

and cellulose electrodes up to 4.0mm 

• Unique Auto-adaptive Arc Force TM instantly adjusts 

the weld current to maximise arc stability, avoid 

sticking and minimise spatter 

• Rugged and impact resistant casing 

• Built-in VRD 

• Two year warranty on 

parts and labour 

INVERTEC V350PRO 

V350PRO-K126PKG 

• Versatile, multi-purpose, multi-process power source 

• Supplied in a Ready-to-Weld package, configured 

for innershield welding applications, 

with LN25Pro wire feeder and K126 gun 

• 5-425 amp output range for all recommended 

processes from TIG to arc gouging 

• Three-year warranty on parts and labour 

• Compact, lightweight and tough enough for 

portable welding applications 

PLEASE NOTE: 


may apply in 

some areas 

PowerMIG 180C 

K2668-1 

• Ready-to-Weld package 

• Exclusive Diamond Core Technology 

• Wide 30-180 amp welding output range 

• 3-year warranty on parts & labour 

• Weld 0.5-5mm sheet metal in a single pass 

• Industrial cast aluminium drive 

• Dual-gear drive for positive wire traction 

without crushing 

21

Portable Magnetic Drilling Machines 

HF-35 

HF-30A 

BS-7L Metal Cutting Band Saw 

• 305 x 178mm rectangular capacity 

• Heavy-duty 0.56kW / 3/4hp 240V motor 

• Adjustable hydraulic feed cutting rate 

• Mitre cuts to 45º using calibrated vice 

• Wire wheel brush to clean swarf from blade 

• Built-in coolant system 

• Adjustable blade roller guides 

• Adjustable 4-speed pulley drive system 

• 1100W, 240V motor 

• Magnetic holding strength 1529kg/f 

• CE approved 

Features: HF-35 

• Drills up to 35mm diameter through 50mm plate 

• Sturdy feed handles 

• Includes drill chuck and adaptor for easy 

conversion to use twist drills up to 12mm diameter 

Features: HF-30A 

• Drills up to 30mm diameter through 50mm plate 

in the auto mode & up to 35mm with manual feed 

• Can be used in manual feed only with drill chuck 

• 3 speed feed motor 

AL-336D Centre Lathe 

• 2-Axis digital read out system 

• Gear drive headstock 

• Precision ‘V’-beds are hardened and ground 

• Foot operated spindle brake with safety cut out 

• 18 spindle speeds 65-1810rpm 

• Powered longitudinal and cross feeds 

• Removable gap bed-way 

• Enclosed quick action gearbox 

• 300mm swing • 900mm distance b/c 

• 38mm spindle bore • 1.5kW / 2hp, 240V motor 

22 

TOOLS 4 INDUSTRY 

HM-50 Turret Milling Machine 

• 2-Axis digital read out system 

• Metric dial graduations @ 0.02mm 

• Vertical dial graduations on hand wheel @ 0.05mm 

• Includes coolant system, swarf / splash tray & light 

• Precision-ground dovetail slides 

• Tilting head ±90º left to right 

• Fine hand wheel operated 

quill feed 

• Spindle taper 30NT 

• X-Axis Travel 600mm 

• Y-Axis Travel 220mm 

• Z-Axis Travel 340mm 

• 1.5kW / 2hp, 240V motor 

• Spindle speeds 

220-2400rpm 

HM-50 INCLUDE 

THESE 

ACCESSORIES: 

www.t4i.com.au

EB Series Electrabrake Magnetic Panbrakes 

EB-1000 

EB-1250 

SG-41 Manual Guillotine 

• 1320mm x 1.2mm cutting capacity 

• Strong cast-iron construction 

• Back gauge with fine adjustment 

• Front sheet supports with adjustable 

length guide • Squaring arm 

• Spring return mechanism 

NEW GENERATION BENDING 

• Typical industries: roofing, aircraft, general 

sheet metal fabrication 

• 1.6mm mild steel capacity • 240V input power 

• Electromagnetic rather than mechanical clamping 

• Bends all types of sheet metal, aluminium, copper, 

stainless steel 

• Excellent design easy to use – forming deep 

channels and closed sections, deep boxes 

PB-820A Manual Panbrake 

• 2440mm x 2mm capacity 

• Extended fingers allows bending of pans or boxes 

• Ground segmented fingers can be repositioned 

• Safety top beam support stop lever 

• Grease nipples located on all rotating parts 

• Includes rear manual back gauge 

www.t4i.com.au 

HDP-15, HDP-35 Hydraulic Presses 

Ideal for removing and installing - bushing, 

ball-joints, bearings, gears & pulleys, etc 

• Adjustable horizontal ram position 

• Screw type rapid approach on ram 

• Heavy duty winch on table rise and fall 

• Centres for shaft straightening 

• 100mm pressure gauge 

• Spring return on ram 

• Complete with V-blocks 

Features: HDP-15 

• 15 tonne capacity 

• 628mm width 

between posts 

• 840mm max. 

ram to table 

• 130mm stroke 

Features: HDP-35 

• 35 tonne capacity 

• 790mm width 

between posts 

• 730mm max. ram 

to table 

• 130mm stroke 

23 

TOOLS 4 INDUSTRY

FOMF 300 Blast-Jet Maxi Foamer 300 

The big foaming applicator! 

The Blast-Jet stainless steel Maxi Foamer applies chemical 

like shaving cream. The Maxi Foamer is designed to increase 

chemical dwell on the surface creating a cleaner, brighter finish 

to your vehicle. With a Blast-Jet Maxi Foamer - just stand back 

and let it do the work for you! It will save you a 

massive 60% on chemicals. 

KM 413521 

Blast Jet Therm 895-1 

Ever heard of the best getting better? 

Blast Jet Therm 895-1 is it! 

Some outstanding reasons for the 

Therm 895-1 getting better: 

• Higher efficiency burner system – 

giving you higher heat output 

and lower fuel consumption 

• Optical Flame Monitoring system for 

the burner – keep the operator safe! 

• More ergonomic system 

controls – making the unit easier 

to operate and control 

• Newly developed pump safety 

block – protects you and your 

High Pressure Cleaner from over 

pressurization of the system 

• 2 year warranty on the complete unit 

and 10 year on the brass pump head 

• Dry run safe 

• On board water tank – greatly reduces 

the risk of cavitation 


BJHD240-15AY Portable Hot Water 

High Pressure Cleaner 

Totally Independent of Power Supply! 

Blast·Jet range of Heavy Duty Hot Water High Pressure 

Cleaners you can take anywhere - No electricity required! 

With a grunty 3500psi at 15L/min pump combined with 

a powerful 10 HP Yanmar Diesel motor and hot water, 

this unit is ready for the toughest, onsite industrial 

job! Watch the hot water melt the grease, grime or 

encrusted dirt away in seconds! Furthermore the 

unit comes with a 12 Volt burner for your safety and the 

engine is electric start. The unit is designed for durability 

and your peace of mind. It is ideal for transport yards, 

earthmoving companies, food processing plants, mining 

and anyone else needing a Powerful Hot Water unit totally 

independent of power supply. Ask for your free trial today! 

Blast Jet Mine Master 

Does your machine break down? 

Blast Jet has the answer! 

Some outstanding features of 

the Mine Master: 

• Tiltable and lockable ramp 

• Large easy to see fuel gauge 

• Robust 60 meter capacity High 

Pressure Hose Holder 

• Lockable inspection/service cover 

• Large Water intake filter 

• Large fuel tank with X large filter 

and water trap 

PLEASE NOTE: 


may apply in 

some areas 

25

Want a better quality powertool. 

Powertools that work as hard as you do. 

Built to last. 

26 

* Terms and conditions apply.

560w Powershear 

750w High Torque Impact Drill 

Powershear 

• Torque 5Nm 

• No load speed 2,800rpm 

• Min. cut radius 50mm 

• Cutting capactity sheet steel 1.6mm, stainless steel 1.2mm 

1,100w, 5” Grinder with Quick Nut 

SBE 750 

• Drill diameter: concrete 20mm, 

steel 13/8mm, softwood 40/25mm 

• Speeds at no load 0-1.000/0-3.000rpm 

• Speed at rated load 530rpm/1.600rpm 

• Max impact rate 57,000 bpm 

• Chuck capacity 1-13mm 

2,300w, 14” Cut Off Saw 

W-11-125 Q 

• No load speed 10,000rpm 

• Spindle thread M14 

• With Quick nut for quick blade change without tools 

CS 23-355 Incl. 1 Cutting Disc 

• Max. cutting Ø 65mm bar steel, 

125mm pipes, 115-130 shape steel 

• Max. opening of vice jaws 238mm 

• Disc Ø355mm 

• Speed at no load 4,000rpm 

Why buy Metabo? 

3 year Tool & 

Battery Warranty 

Constant speed 

under heavy load 

Safety Clutch 

Long-lasting 

Marathon motor 

Quick nut 

Variable speed 

Constant speed 

under normal load 

3 Function 

Gearbox 

Impulse removes 

damaged screws 

4 Function 

Gearbox 

Quick Chuck 

Quick Protect 

Deadman Paddle 

B 

STOPS WITHIN 3 SECONDS 

BRAKE 

Brake stops the 

machine within 

3 secs. 

Rotating Back 

Handle 

Overload 

Protection 

RESTART 

Restart 

Protection 

Vibration 

dampening handle 

CONTROLLED START UP 

SOFT START 

Soft Start for more 

control 

* Metabo's XXL Warranty Program is a two year extension of the one year warranty for customers 

who register personal information online (www.metabo.com/xxl) within 4 weeks of purchase. 

Auto stop 

carbon brushes 

CODE! Secure 

technology 

27

FLSWP001 

Forklift Safety 

Work Platform 

Load Skates - Nylon Roller 

LSNR02T 8 Load Wheels 2 Tonne Capacity 

LSNR06T 6 Load Wheels 6 Tonne Capacity 

Extra Heavy Duty Castors 

XHIF6CIPU Fixed 800kg 

XHIS6CIPU Swivel 800kg 





Super Extra Heavy Duty Castors 

XXHIF6CIPU Fixed 900kg 

XXHIS6CIPU Swivel 900kg 






Heavy Duty Scissor Lift Tables 

LT150 Scissor Lift Table 150kg 



LT500XL Scissor Lift Extra Large Table 500kg 


LT1000XL Scissor Lift Extra Large Table 1000kg 

Manual Stackers 

MS540 Manual Stacker 1000kg 

MSS1500 Manual Straddle Stacker 1500kg 

Heavy Duty Double Scissor Lift Table 

LT350 Double Scissor Lift Table 350kg 

PLEASE NOTE: 



Electric Stackers 

EMS2000 Electric Stacker 2000kg 

EMSS2000 Electric Straddle Stacker 2000kg 

29

NATURALLY 

BETTER 

Biodegradable User Friendly Acid and Salt Resistant 

Heavy Duty 

Liquid Lanolin 

•Lubricant and corrosion 

inhibitor for marine, heavy 

industrial and commercial 

applications. 

•Non-conductive to 70kV 

Available in 400g Aerosol, 

750ml Spray Pack, 1lt Jerry Can, 

5lt Jerry Can, 20lt Drum. 

Resists Wash Off 

‘ 

We use it for everything 

that requires lubrication 

or protection from the 

harsh salt environment 

experienced on the island. 

It has proved far superior 

to other lubrication or 

protection products that 

we have used on the 

island 

’ 

John Trail, 

Operations Manager, 

South Stradbroke Island, 

Gold Coast City Council. 

Non-conductive 

General Purpose 

Liquid Lanolin 

•General lubricant and corrosion 

inhibitor for light industrial, 

electrical and household 

applications. 

•Non-conductive to 70kV 

Available in 

400g Aerosol, 750ml Spray Pack , 

1lt Jerry Can, 5lt Jerry Can, 

20lt Drum. 

Type “A” 

Grease 

•Multi purpose food grade 

approved pure natural 

lanolin 

•Food grade, non conductive 

to 70kV 

Available in 250ml Tube, 

235ml Jar, 500ml Jar, 

1lt Pail, 4lt Pail, 20lt Pail 

30 

Lanotec Australia Pty Ltd 

Phone: 07 3373 3700 Fax: 07 3373 3777 

Email: info@lanotec.com.au Web: www.lanotec.com.au

NATURALLY 

BETTER 

‘ 

Citra-Force has 

saved time with labour, 

steam cleaning, 

high water pressure 

and frustration by being 

effective, user friendly 

and cost effective. 

I have found that 

Citra-Force is a great 

product and has many 

other uses 

’ 

Des Gleeson, 

City Cleaning Supervisor, 

Gold Coast City Council 

Citra-Force 

•A water soluble, industrial 

strength cleaner and degreaser 

with a pleasant citrus aroma. 

•Non conductive to 30kV. 

Available in 400g aerosol, 

1, 5, 20 & 200 litre containers. 

Release Agent 

•A water soluble, 

concentrated release 

agent for concrete 

formwork 

Available in 2.9lt Bottle, 

5lt Jerry Can, 20lt drum 

Anti-Spatter 

•Biodegradable, non-toxic 

non-carcinogenic, 

non-flammable, 

with no Methylene Chloride 

or silicones 

Available in 750ml Spray Pack, 

5 Litre Jerry Can 

Lanotec Australia Pty Ltd 

Phone: 07 3373 3700 Fax: 07 3373 3777 

Email: info@lanotec.com.au Web: www.lanotec.com.au 

31

60215 

Fabricated 

Offset Vice 

200mm 

• Manufactured from steel plate 

• Designed for all heavy duty work 

• Australian designed ‘Offset advantage’ 

which allows the user to work on long vertical 

sections with the full width of the jaws without 

obstruction from the main body of the vice 

• Replaceable case hardened jaws, a ‘V’ notched 

jaw to hold round objects 

All Steel Heavy Duty 

Fitters Clamps 

•Extremely strong zinc 

plated, hardened and spring 

tempered steel bar 

•ACME thread 

•Corrosion resistant black 

oxide spindle with T-handle 

pad pivoting to 35 degrees 

43333 600mm 

43334 800mm 

43335 1000mm 

Proudly 

Australian 

Owned 

Proudly 


Made 

G CLamps – Super Grade 

• Malleable Iron 

• Cast heavy ribbed frame for strength 

61157 250mm 

61158 300mm 

Proudly 


Owned 

Proudly 


Made 

62151 

Folding Vice 

Pipe Bender 

Stand 

• Can be used with 

Dawn Pipe Vices, 

Engineers Vices to 

100mm, Pipe Bender Set 

• Extremely rigid and durable 

• Lightweight • Portable 

• Easily set up and taken down 

• Includes large tool tray 

62168 

10 Ton 

Proudly 


Owned 

Proudly 


Made 

Heavy Duty Pipe 

Bender Set 

• Robust 

construction 

• Fame and 

former system designed 

in conjunction with tube manufacturers 

• Hydraulic unit is based on Military jack design 

• Quick bending and release action 

• Bends extra light to extra heavy pipes 

Carver T Slot Clamps 

• Hold work securely on many machines, including 

boring machines, planners, mills, lathes, power 

presses and radial drills 

• Can be used at any angle 

• Head creates a ‘push’ 

action when reversed 

• Alternative positions 

for fulcrum pin 

301230 300mm 

301232 600mm 


Thomas Coldsaw 

350 Super Technics 

• Mitre cutting capacity 45° - left & right 

• Head rotation 90° to the right for end-slotting of tube 

• Oil bath gearbox reduction unit 

• Blade protection clutch • Coolant system 

• 3 phase - 3 speed - 22/44/88 RPM 

• Adjustable double hinged pivot 

• Sliding countervice for longitudinal cutting 

• Adjustable length stop • Burr-free clamp 

• Infeed roller • Made in Italy 

4250240 Single Phase 240V 

4350415 Three Phase 415V 

BONUS 

BLADE 

NEW 

ALFRA 

Mini Set 

Magnetic Based Drill - Part No: 18510 

• Solid brass guides 

• Powerful 1200 watt motor • 140mm Stroke 

• 114mm - 229mm Height Adjustment 

• Two speed oil bath gearbox 250/450 R.P.M 

• Huge 12,000N Magnetic Adhesion 

• 50mm Core Drill cutting Depth 

• Made in Germany 

Beeline 360° 

Crossline laser - Part No: 72360 

• Super bright beams 

• 3 x 360° lines + plumb point down 

• Instant self levelling +/- 5° with automatic 

flashing when beyond self levelling range 

• Accuracy: +/- 2mm at 10m 

• 25m indoor range or up to 50m with receiver 

• Kit includes Heavy duty carry case, receiver 

and bracket, laser target, safety glasses 

• Calibration Certified 


33

The right tool to help 

you get the job done. 

The AIS Product Guide 

now available. 

CONTACT 

YOUR LOCAL 

STORE TO GET 

YOUR COPY 

TODAY 

Also available from 

www.aisnational.com.au 

34

YOUR LOCAL AIS MEMBER DIRECTORY 

NEW SOUTH WALES 

Batemans Bay.......................... Industrial Replacements 

Bomaderry................................Tarrant’s Service Centre 

Broken HIll ...........Lawrence Industrial & Auto Supplies 

Charmhaven....................................................BJ Howes 

Cowra...................... Lachlan Steel & Industrial Supplies 

Deniliquin..........................................................Agspares 

Eden...................Nolan Auto Parts & Industrial Supplies 

Forbes.....................................Haley’s Steel & Hardware 

Forster............................................. Rocket Tools Pty Ltd 

Goulburn .............................Goulburn Welding Supplies 

Gunnedah.....................................BJ Howes - Gunnedah 

Griffith................................................... Griffith Bearings 

Hay............................................. Ag & Auto Parts Pty Ltd 

Jerilderie..............................................East End Welding 

Kempsey............................................Preen Engineering 

Kirrawee.................................................Bilba Industries 

Lidcombe.......................................... De Rossi Industrial 

Lisarow............................................................BJ Howes 

Mascot...........................................Mascot Steel & Tools 

Mudgee....... Cudgegong Engineering & Safety Supplies 

Newcastle.................................. SLE Industrial Supplies 

Oberon.............................................Oberon Engineering.. 

Pambula.............Nolan Auto Parts & Industrial Supplies 

Parkes.................................................. Power Tools Plus 

Port Macquarie............................... Rocket Tools Pty Ltd 

Queanbeyan................. Queanbeyan Industrial Supplies 

St Marys.......................................ADG Welding Supplies 

Tamworth.................................. Avro Industrial Supplies 

Taree............................................... Rocket Tools Pty Ltd 

Unanderra................................................Days Industrial 

Wagga Wagga..................Bromac Engineering Supplies 

West Wyalong................Davies Automotive & Industrial 

Wetherill Park............ Greater West Power Tools Pty Ltd 

Windsor...........................Buttsworth Industrial Supplies 

QUEENSLAND 

Ayr.................................................................... Ruralquip 

Brendale.................................. Northside Trade Supplies 

Cairns.....................................................Cole Tool Centre 

Charleville........................................Mulga Tools & Parts 

Chinchilla.............Jackson’s Parts N Industrial Supplies 

Clontarf....................................... Zackly Industrial Sales 

Cooper Plains.....................................................Tool City 

Emerald.... Central Queensland Filter & Industrial Supplies 

Giru.................................................................. Ruralquip 

Gladstone...... Central Queensland Tool Supplies Pty Ltd 

Ingham.................................................Ingham Agencies 

Ipswich............ Krew Tools & Industrial Supplies Pty Ltd 

Kingaroy................................Kingaroy Equipment Sales 

Mackay.........Blacksmith Jack’s - Industrial Warehouse 

Fraser Coast....City & Country Wholesalers Australia Pty Ltd 

Morningside................ Collins Tools & Welding Supplies 

Rockhampton........................................ A Mans Toyshop 

Roma.................................................Taylors Part Centre 

St George....St George Agricultural & Engineering Supplies 

Sunshine Coast..........................Direct Machinery Sales 

Toowoomba..............................................Sedl Agencies 

Townsville............................................. A Mans Toyshop 

Tully............................... Queensland Steel & Equipment 

Wacol.................................... Welding Equipment & Hire 

Yatala.......Almar Welding, Engineering & Hose Supplies 

SOUTH AUSTRALIA 

Cummins...................Cummins Bearings & Engineering 

Kadina...............................................................Vennings 

Long Plains..................................................... Sharmans 

Loxton..................................O.E Bradtke & Sons Pty Ltd 

Mt. Gambier...................................... GT Industrial Sales 

Murray Bridge..........Eastside Bearing & Brake Supplies 

Port Lincoln....................... Eyre Gas & Welding Supplies 

Whyalla Norrie....................RI Gas & Industrial Supplies 

Wingfield....................................................GRH Supplies 

NORTHERN TERRITORY 

Alice Springs.............................Alice Industrial Supplies 

Palmerston...............................................Weldpower NT 

VICTORIA 

Bairnsdale.......................................B J Bearings Pty Ltd 

Ballarat.....................................Mesh & Masonry Pty Ltd 

Benalla................ Delatite Steel & Engineering Supplies 

Bendigo...................................................Tools Unlimited 

Campbellfield..................................B J Bearings Pty Ltd 

Colac........................................Colac Industrial Supplies 

Dandenong......................................B J Bearings Pty Ltd 

Echuca................................................................ Agparts 

Ferntree Gully..................................BJ Bearings Pty Ltd 

Geelong............................................ Geelong Machinery 

Hamilton...............................C & J Engineering Supplies 

Healesville.....Healesville Hydraulics & Industrial Supplies 

Horsham.........Horsham Bearings & Industrial Supplies 

Laverton Nth....Swanston Engineering Supplies Pty Ltd 

Leongatha.......................................B J Bearings Pty Ltd 

Mansfield............ Delatite Steel & Engineering Supplies 

Mildura....Mallee Bearing & Transmission Supplies Pty Ltd 

Montmorency.........Australian Gas & Industrial Supplies 

Morwell............................................Mid Valley Bearings 

Pakenham.......................................B J Bearings Pty Ltd 

Portland......Thorpes Machinery & Engineering Supplies 

Sale.................................................B J Bearings Pty Ltd 

Shepparton.................................. JD Industrial Supplies 

Swan HIll...............................Duguid Industrial Supplies 

Traralgon..........................................Mid Valley Bearings 

Warragul.........................................B J Bearings Pty Ltd 

Warrnambool....................South West Tools & Industrial 

Whittlesea....................... Whittlesea Industrial Supplies 

Wodonga................................................Kellys Wodonga 

Wonthaggi.......................................B J Bearings Pty Ltd 

TASMANIA 

Burnie.......................................................Nubco Pty Ltd 

Devonport.................................................Nubco Pty Ltd 

George Town.............................................Nubco Pty Ltd 

Hobart.......................................................Nubco Pty Ltd 

Launceston...............................................Nubco Pty Ltd 

Mornington...............................................Nubco Pty Ltd 

Kingston....................................................Nubco Pty Ltd 

WESTERN AUSTRALIA 

Albany..............................Southern Tool & Fasteners Co 

Bayswater....................................... Alltools (WA) Pty Ltd 

Boulder.........................................Kalgoorlie Case & Drill 

Fremantle....................................Fremantle Power Tools 

Maddington.............Integrated Industrial Mining Supply 

Rockingham......................................................Toolstore 

OVER 100 LOCATIONS AUSTRALIA WIDE 

www.aisnational.com.au 

Call your local AIS store for special pricing. Not all products may be available at all the stores and are subject to availability. AIS Ltd reserves the 

right to correct printing errors and omissions. Accessories shown with products are not included unless specified. Colours may vary to actual items. 

35

PERSONAL SERVICE 

THE RIGHT PRICE 

NATIONAL BRANDS 

EXPERTISE 

RANGE 

For your nearest store please visit 

www.aisnational.com.au

Quality Tools! - Australian Gas & Industrial Supplies

Create successful ePaper yourself

Delete template?

Save as template?