Innovation

All T-316 Stainless!
RIGGING HARDWARE | Turnbuckles
Stainless Jack Line Fairlead
Finally, a central Jack Line mount to get your Jack Lines off the deck, the preferred way to install
allowing for a shorter tether and shorter fall. Mount this new billet 316 stainless fairlead to a shroud 5 or
6 feet above the deck. Run a 3/8” diameter low stretch line from a stern cleat through the fairlead (1/2”
dia.) then to a bow cleat. You are then ready to clip your safety harness to the Jack Line.
Fits wire, rod or Dyform shrouds from 5/16” to 1/2”. Rugged, CNC machined from billet 316 stainless.
4 ¼”-20 cap screws securely mount the fairlead to your shroud. Designed to be snug without overclamping
or damaging your rigging. Complete kit includes wedge and shims for 5/16” – 1/2” sizes.
Smooth back side helps prevent sail handling hang-ups. Measures: 2 3/8” L, 1 5/16” W, 2 1/2” D.
Stainless Jack Line Fairlead Cat. No. 49-100
316 Stainless
Billet!
Jack Line Fairlead Location on Shrouds
Inner Forestay Storage Bridle
An improvement from our earlier design. Features an overall 12” length, welded 316
stainless plate design with center bracket to attach your tackle to. The end brackets,
together with the stainless plates, keep your inner forestay secure while stowed. Center
bracket eyelet measures 3/8”. For use with up to 1/2” inner forestays.
Inner Forestay Storage Bridle Cat. No. 49-250
Inner Forestay Storage Bridle
Johnson Marine • Tel 860.873.8697 • Fax 860.873.8589 • www.csjohnson.com 35