Hayn Rigging Products

tel800.346.4296 fax800.441.4296
[ www.haynmarine.com ]
Rigging Studs
Hayn rigging studs are CNC machined from 316 grade
stainless steel. All rigging studs are feature rich including
open ended wrench flats to accommodate various wrench
widths, “swageline” depth indicators, size identification,
and cross drilled hole with reduced shank end.
Metric Wire Sizes, Machine Swage
Right Hand
Wire Size Thread Size Thread L Part #
3mm 1/4-28 2-1/4" 14SEM03RH
4mm 1/4-28 2-1/4" 14SEM04RH
4mm 5/16-24 2-1/2" 516SEM04RH
5mm 5/16-24 2-1/2" 516SEM05RH
5mm 3/8-24 2-7/8" 38SEM05RH
6mm 3/8-24 2-7/8" 38SEM06RH
6mm 7/16-20 3-1/4" 716SEM06RH
6mm 1/2-20 3-1/4" 12SEM06RH
7mm 7/16-20 3-1/4" 716SEM07RH
7mm 1/2-20 3-1/4" 12SEM07RH
8mm 1/2-20 3-1/4" 12SEM08RH
8mm 5/8-18 4" 58SEM08RH
10mm 9/16-18 4" 916SEM10RH
10mm 5/8-18 4" 58SEM10RH
11mm 3/4-16 5" 34SEM11RH
12mm 3/4-16 5" 34SEM12RH
12mm 7/8-14 6" 78SEM12RH
14mm 7/8-14 6" 78SEM14RH
14mm 1.0-12 6-7/8" 1SEM14RH
16mm 1.0-12 6-7/8" 1SEM16RH
Extended Turnbuckle Studs, Machine Swage
Right Hand
Wire Size Thread Size Thread L Length Part #
5/32" 1/4-28 2-1/4" 4-1/4" 14SE532EX6R
5/32" 5/16-24 2-1/2" 5-3/4" 516SE532EX7R
3/16" 5/16-24 2-1/2" 5-3/4" 516SE316EX7R
3/16" 3-8-24 2-7/8" 5-3/4" 38SE316EX8R
7/32" 3/8-24 2-7/8" 5-3/4" 38SE732EX8R
1/4" 3/8-24 2-7/8" 5-1/2" 38SE14EX8R
1/4" 1/2-20 3-1/4" 9-1/4" 12SE14EX12R
9/32" 1/2-20 3-1/4" 9-1/4" 12SE932EX12R
5/16" 1/2-20 3-1/4" 9" 12SE516EX12R
5/16" 5/8-18 4" 8-3/4" 58SE516EX12R
3/8" 5/8-18 4" 8-1/2" 58SE38EX12R
RIGGING Rigging Hardware HARDWARE Lifeline Hardware Replacement Parts Additional Hardware/Tools
‘Length’ measured from wire end to thread end
Larger sizes and custom configurations available
19