www.mdfitalia.it for technical specs of the products we invite you to visit our website MARK low table designer Alessandro Masturzo 47 57
FIN sofa designer Jehs+Laub HARA sofa designer Bruno Fattorini & Partners EASY WAVE modular system designer Bruno Fattorini & Partners BEND chair designer Jehs+Laub INMOTION modular system designer Neuland Industriedesign A highly fl exible and customisable system of sofas and sectionals. The project’s origin lies in the juxtaposition of signs: the combination of the thin frame with large-sized cushions, the structural stiffness and the soft elegance of upholstery, the coexistence of a perfect symmetry of the bases with the natural unbalance of soft sections. The system features a different modularity of the armrests: tall and long, tall and short, low and long or low and short. The system can be used either in a symmetrical or asymmetrical way. Frame The supporting structure is made of a 3 cm thick MD belted wood fi breboard (supported by a metal framework) with tapered and bevelled profi le. Powder-coated in the following colours: matt white, or matt anthracite grey. The special varnishing process ensures a better resistance than a standard lacquering. The surface of the frame in some sectionals can be used as a shelf and/or coffee table. Filling in non-deformable variable density polyether and polyester wadding; cushions with a completely removable upholstery. Backrests and armrests feature an inner frame in solid wood. Sectionals They allow to develop numerous linear or corner lay-outs. All of the modules feature recessed internal legs so that the frame linear design is not interrupted. With sectionals, a special coupling device is provided. Sectionals cannot be used individually. Cover The fabric or leather upholstery of the cushions has been designed to enhance their softness. The collection features an aesthetic seam with contrast stitching. A new typology of storage units that represents a 3D innovation making a visual and functional use of the side section as well as the front one. Usually, the storage unit side view is never considered in terms of utilization but for juxtaposition. The system consists either of column units, base units, stackable or hanging units. Featuring large-sized compartments, divided in a functional way to receive and organise everyday objects, books, magazines or electronic equipment. The system’s fl exibility is considerable: swivel modules, with drawers or large drawers, with fl ip opening door, stackable sectionals or sectionals to be fl anked, free-standing or wall-mounted. The elements can be highly customised: the open compartments as well as the rotary units may feature different materials and/or colours and can be newly varied by the customer even after their purchase. Typologies All of the units are made of medium-density wood fi breboard (1.6 cm thick), varnished in matt white, 48 cm deep. They are divided into two main categories: - column storage units with doors, 185.5 cm high, with a 2.5 cm plinth and adjustable small feet available in the following lenghts: 34, 45, 53 cm. Column storage units with rotary units are reversible vertically. - low ground-resting storage units (base unit), 32 cm high with a 2.5 cm plinth and adjustable small feet; available in the following lenghts 53, 85, 144, 203 cm. - low stackable storage units, 32 cm high with a 1.6 cm spacer; - low hanging storage units, 32 cm high, in length 53, 85, 144 cm; equipped with a kit for wall mounting. Finishes Units are always varnished in matt white; only open compartments and rotary compartments are available in the following options: - matt white, green, orange, blue, sand, ivory, yellow and anthracite grey - natural wood* and natural grey wood* - frosted glass *Multilaminar wood composed of veneers based on precious woods such as ayous, poplar and lime. The special manufacturing process allows to highlight the typical features of wood-types through creative aesthetic and customised fi gures. Environmentally-friendly and fully made of woods coming from forests and plantations managed following sustainability standards. Technological innovation within a thorough and minimal design. Sofas with a mainly domestic seat: a simple, rigorous and essential design that incorporates a mechanism of the latest generation that allows for a highly precise electronic adjustment of both the backrest and the seat, independent of each other. The armrest features a pronounced design of the silhouette: the shell is very thin next to the seat, then it grows larger in the supporting section, accommodating inside it a comfortable upholstery. Frame Filled with varnished metal supporting structure, upholstery in variable density expanded polyurethane and cover in polyester wadding. H 15 cm leg with sled base in aluminium diecasting in polished aluminium fi nish or painted in the following colours: matt white or matt anthracite grey. Available in three sizes, with low backrest H68 or high backrest H80, fi xed or movable. Adjustable backrest and seat. An innovative electrically-controlled system allows to tilt the backrest and to increase the seat to adapt it to different comfort requirements. Height-adjustable backrest to - 7cm (-10°), while the seat can be adjusted to increase its depth up to +15 cm. The system consists of an electric motor (24 V, 50W, CE compliant), a battery (lithium ions 1180 mAh, CE compliant), a transformermotor control unit (230 V, 50Hz, 5W CE compliant) and a cordless radiofrequency remote control (2.4 GHz, CE compliant). It works with a rechargeable battery. Voltage: 220V (Europe) and 110 V (Usa). While ordering, please always specify which voltage is required. Cover The upholstery covers every part of the sofa and is completely removable. Accessory cushions Dedicated 55x55 cushions with remote control pocket. Made in polyether and fabric or leather cover. Removable. Unstructured version of the Wave wall system that allows to develop different compositions, that are more restrained and rarefi ed, with few elements thus making the system more transverse within the house. Visual and functional features remain unaltered, maintaining the design and dynamic nature of the original product. Shelving units Shelves are made of white acrylic solid surface, 9 mm thick. Some shelves feature a change of depth (35/25 and 25/15 cm) connected through a sinuous and smart design. Sizes and typologies: - L85, L90 and L180 cm rectangular-shaped shelving units, 15, 25 or 35 cm deep - L85, L90 cm profi led (Left and Right) shelving units with variable depth, 15/25 and 35/25 cm. - L 180 cm profi led (Left and Right) shelving units with variable depth, 35/25 cm. - L 180 cm profi led shelving unit with variable depth, 25/35/25 cm. They are also available in the electrifi ed versions: two shelving units (11.8 cm high), equipped with rear hollow space for cable passage and concealing. In the shelf’s upper section, you fi nd an opening for cable management made of the same material of the shelf, to enable the cable outlet towards every possible appliance. Sizes and typologies: - L 180 cm profi led electrifi ed shelving unit with variable depth 25/35/25 cm - L 180 cm rectangular-shaped electrifi ed shelving unit, 35 cm deep. Storage units Made of white acrylic solid surface, available in the following options: with door, two drawers or a large drawer: - L35 D35 H35 cm square-shaped large drawers - L90 D35 H35 cm rectangular-shaped large drawers. The door is made of white varnished aluminium plate; drawers, with acrylic front, are equipped with opening push and pull mechanism. All of the units are wall-fi xed through an expressly designed aluminium foil. Electrifi ed shelving units are wall-fi xed by means of special brackets to ensure a solid TV support. A family of seatings of great image and comfort. Designed for the home, the offi ce and community areas. The stackable frame which can be combined with three shell options makes this chair fl exible and functional to any ambience. Frame The frame, characterized by a trapezoidal section, is entirely made of aluminium through die-casting and extrusion. Available also with arms. Matt lacquered in white, black, light grey and anthracite grey, chrome-plated, or polished aluminium Shell options: - wooden shell in curved wood, lacquered in bleached or wenge-stained oak, in natural wood and natural grey wood. - 3D-upholstered shell: an inner countershell in curved wood with polyurethane padding, upholstered in the fabric options Manila, Londra and Cambridge, and characterized by a peculiar three-dimensional pattern. - stretched upholstered shell: an inner countershell in curved wood with polyurethane padding. The shell is upholstered in the fabric options Manila, Cambridge, Liverpool, Londra, or in leather. - mesh shell. Dims Chair: width 54 cm, length 51 cm, height 80 cm - seat H 48 cm. Chair with arms: width 54 cm, length 58 cm, height 80 cm - seat H 48 cm.