Technical Reference - KYOCERA Document Solutions

Table 7.39. E-Mask Bit Values
Bit Error No. Description
4 2 3 Illegal parameter
8 3 4 Unknown character
16 4 5 Unknown character set
32 5 6 Plot position overflow
64 6 7 –
128 7 8 –
S-Mask/P-Mask Values
Table 7.40. S-Mask/P-Mask Values
S-Mask/P-Mask Values Bit Value Description
1 0 Pen down
2 1 Changed P1 or P2
4 2 Valid digitizing point
8 3 Initialized
16 4 Ready
32 5 Error
64 6 –
128 7 –
Device-Control Instructions
Table 7.41. Device-Control Instructions
HP 7550A Emulation [KC-GL] (Mode 8)
Instruction Parameters Description
ESC.( – Plotter ONa ESC.Y – Plotter ON
a Ignored
a
ESC.) – Plotter OFFa ESC.Z – Plotter OFFa ESC.@ [();()]; Plotter configurationa ESC.B – Output buffer space
ESC.E – Output extended error
ESC.H [();();
(); (;...)]
Select handshaking mode 1a ESC.I [();();
(); (;...)]
Select handshaking mode 2a ESC.J – Ignore device-control instructionsa ESC.K – Ignore plot instructionsa ESC.L – Output buffer size
ESC.M [();(); Select output mode (output trigger character, echo
();
();();
()]
terminator, output terminator)
ESC.N [();();
(;...)]
Select extended output and handshaking mode 1a ESC.O – Output extended status
ESC.R – Reset handshakinga 7-113