Mat No 741 518-AA Version 05/2010

PLATINUM SensorKit
Safety and Dangers
2 Safety and Dangers
Use SensorKit according to its intended use.
Use SensorKit and accessories in original and technically fully
intact condition without unauthorized modifications.
Operate the SensorKit with the respectively designated supply
voltage only (see 9 Technical Data).
Make certain that the SensorKit is installed and serviced by
trained personnel only.
Ensure that all protection devices are fully operational.
Disconnect the SensorKit from the mains prior to any installation
or maintenance work.
Ensure that regulations stipulated by trade associations and
inspection authorities and agencies are observed and that the
connection conditions of the relevant energy supplier or
equivalent national and international rules and regulations are
adhered to.
Observe conditions of use (see 9 Technical Data).
Start up, install and mount according to the order indicated in the
installation and operating manual.
3 Intended Use
PLATINUM SensorKit is to be used exclusively for the recording
and presentation of:
Solar irradiation (in W/m 2 )
Temperature of the solar modules
Exterior temperature
Use PLATINUM SensorKit exclusively in connection with
PLATINUM WebMaster.
Use of the PLATINUM SensorKit is possible:
inside buildings
outside
Installation and operating manual: PLATINUM SensorKit
Version 05/2010
Mat. No. 741 518-AA
5