CATALOGUE

84
Petzl Height Safety Equipment
®
Petzl NAVAHO SIT
Work positioning seat harnesses
· Wide, semi-rigid waistbelt for excellent support, Waistbelt and suspension seat
lined with breathable perforated foam for maximum comfort when suspended
· The ventral attachment point distributes the weight more evenly between the
waistbelt and the leg loops during suspended work
· The two lateral attachment points transfer the weight evenly around the waistbelt
for comfortable surface-supported work
· The rear attachment point on the waistbelt allows connection of a restraint lanyard
or a TOP chest harness, transforming the harness into a fall arrest harness
· Three equipment loops with protective sheath
· Waistbelt equipped with self-locking DoubleBack buckles
®
Petzl NAVAHO BOD
Versatile work positioning and fall arrest harness
®
Extra to to NAVAHO SIT
· Foam shoulder straps are widely spaced to reduce neck chafing and are linked to
the directional ventral connector for easy donning
· If the waistbelt is weighted, the load is transferred to the shoulder straps, which
distribute it over the shoulders
· A sternal and a dorsal attachment point for connecting a fall arrest system
· A rear attachment point on the waistbelt for connecting a restraint lanyard
· Three equipment loops with protective sheath
· Waistbelt and shoulder straps equipped with self-locking DoubleBack buckles
Petzl GRIGRI
Self-braking belay device
The GRIGRI's self-braking function helps the belayer catch and hold a climber, making it
great for working routes. Works equally well for lead climbing and top roping. Ergonomic
design makes for smooth, controllable lowers. Also great for rappelling on single ropes -
perfect for setting and cleaning routes.
For use with single ropes between 10 and 11 mm in diameter
®
Petzl ASAP
Mobile fall arrest device for rope
· For use on a safety rope
· Stops a fall, a slide or uncontrolled descent
· Locks even if the device is grabbed during a fall
· Works on vertical or angled rope
· Moves up and down along the rope without manual intervention
· Easy to install and remove at any point on the rope
· Can be used with an energy absorbing lanyard
®
Petzl VERTEX VENT
Ventilated helmet for work-at-height and rescue
· Ventilation holes with adjustable sliding shutters allow air to circulate in the
helmet when needed
· Chinstrap designed to reduce the risk of the helmet coming off as a result of an
impact during a fall: it has a breaking strength greater than 50 daN (EN 12492
mountaineering helmet standard)
· Webbing suspension system guarantees optimal comfort
· Headband adjustment wheel is easy to use, even while wearing gloves
· Adjustable headband height
· Shell has side slots that can be used for mounting hearing and/or face
protection