Accu-Flex

AF205
Accu-Flex
Push-On Arbors
The Accu-Flex Push-On Arbor is an economical,
durable, and accurate chucking mechanism.
The simplicity of the Accu-Flex
construction allows a greater
measure of accuracy and
repeatability at a
lower cost.
The piece part is simply pushed onto the
Arbor and gripped by its own inherent forces.
There are no actuating components and
therefore not subject to influences from
erratic cylinder or wrench tightening forces.
Ideal for Inspection
and Locating
Applications.
Piece Part
Gripping Ranges
from .250 to 3.250
Guaranteed
Repeatability .0002
Certified to ISO 9001:2000
www.speedgrip.com

Speedgrip
Accu-Flex
Push-On Arbors
The drawing and chart below indicate the basic guideline dimensions. Due to the broad scope of
dimensional variations Accu-Flex Push-On Arbors are custom designed to meet your special applications.
A DIA C DIA C DIA
PIECE PART
GRIPPING DIA.
F E D
B
ARBOR
NUMBER
PIECE PART GRIPPING RANGE A B C D E F
AF-250 .250 thru .375 1/2 2-3/8 .230 1/2 3/4 5/8
AF-375 .376 thru .500 5/8 2-13/16 .343 11/16 1 5/8
AF-500 .501 thru .750 3/4 2-3/4 .437 13/16 7/8 11/16
AF-750 .751 thru 1.000 1-1/8 4-5/16 .656 1 1-1/2 7/8
AF-1000 1.001 thru 1.375 1-3/8 4-15/16 .875 1-3/16 1-7/8 7/8
AF-1375 1.376 thru1.875 1-7/8 5-3/4 1.250 1-1/2 2-3/8 7/8
AF-1875 1.876 thru 2.250 2-3/8 6-3/8 1.750 1-3/4 2-3/4 7/8
AF-2250 2.251 thru 2.750 2-5/8 6-7/8 2.125 1-3/4 3-1/4 7/8
AF-2750 2.751 thru 3.250 3-3/8 7-5/8 2.625 2 3-3/4 7/8
Each application is closely studied by Speedgrip engineers in order to provide you with the ultimate in accuracy and efficiency.
Quotations are provided upon receipt of:
1. Piece part diameter and tolerance
2. Length of gripping bore
3. Piece part weight
Guaranteed Repeatability .0002
2000 Industrial Parkway • Elkhart, IN 46515
(574) 294-1506 • FAX: (574) 294-2465
e-mail: salesweb@speedgrip.com
www.speedgrip.com
HG 2924 RP 0405