TITANIUM PARTS

1

TITANIUM PARTS 

2 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

WELCOME 

to the Pro-Bolt 2011/12 Catalogue 

About us ...........................................................................................................................2 

Ordering Information ...............................................................................................3 

Measuring Assistance & Material Information ..........................................4 

Pro-Gauge Measuring Tool ...................................................................................4 

Product Profiles ............................................................................................................8 

ALUMINIUM PARTS 

Bolts ................................................................................................................................ 12 

Nuts ................................................................................................................................. 14 

Washers ........................................................................................................................ 14 

Finishing Touches ................................................................................................... 16 

METRIC STAINLESS STEEL PARTS 

Bolts ................................................................................................................................. 18 

Nuts & Washers ......................................................................................................... 20 


Bolts ................................................................................................................................ 22 

Nuts ................................................................................................................................. 26 

Washers ......................................................................................................................... 28 

Rods ................................................................................................................................. 29 

1/4 TURN QUICK RELEASE FASTENERS 

Quick Release Fasteners in all Materials ..................................................... 30 

WORKSHOP KITS, TUBS, BOXES & CABINETS 

Aluminium ................................................................................................................... 32 

Stainless Steel ............................................................................................................ 34 

Titanium ........................................................................................................................ 35 

MOTORCYCLE PARTS 

Full Monty Kits .......................................................................................................... 36 

Engine Kits .................................................................................................................. 38 

Cam Cover Bolts ...................................................................................................... 39 

Sump Bolts ................................................................................................................... 39 

Oil Filler Caps ............................................................................................................. 40 

Fairing Kits ................................................................................................................... 41 

Quick Release Fairing Kits .................................................................................. 42 

Screen Kits .................................................................................................................... 43 

Fuel Cap Kits .............................................................................................................. 44 

Bar Ends ........................................................................................................................ 45 

Top Yoke Nuts ........................................................................................................... 46 

Pre-Load Adjusters ................................................................................................ 47 

Cable and Dial Adjusters .................................................................................... 48 

Reservoir Caps & Reservoir Clips ................................................................... 49 

Gear Shift Rods ........................................................................................................ 50 

Paddock Stand Bobbins ...................................................................................... 50 

Chain Adjuster Blocks .......................................................................................... 51 

Chain Adjuster Bolts ............................................................................................. 51 

Sprocket Nuts ........................................................................................................... 52 

Axle Nuts, Bolts & Swingarm Nuts ............................................................... 54 

Disc Rotor Bolts ........................................................................................................ 56 

CALIPER PARTS 

Bleed Nipples ............................................................................................................. 58 

Banjo Bolts ................................................................................................................... 59 

Caliper Pins .................................................................................................................. 60 

POPULAR STRESS AREA KITS 

Front Caliper Component Refurbishment Kits ...................................... 62 

Race-Spec Radial Caliper Mount Bolt Kits ................................................ 62 

Un-Sprung Weight Overhaul Bolt Kits ........................................................ 63 

Front & Rear Caliper Mount Bolts Kits ......................................................... 64 

Front & Rear Caliper Pinch Bolt Kits .............................................................. 64 

Fork Axle Pinch Bolt Kits ...................................................................................... 65 

Brake & Clutch Perch Pinch Bolt Kits ............................................................ 66 

Handle Bar Bolt Kits ................................................................................................ 66 

Top & Bottom Triple Clamp Bolt Kits ............................................................ 67 

Rider & Pillion Footrest Hanger Bolt Kits .................................................... 67 

Scratch & Spark Sets ............................................................................................... 68 

Subframe Bolt Kits ................................................................................................... 68 

MOTORCYCLE SPECIAL PARTS FOR: 

Aprilia .............................................................................................................................. 69 

BMW ................................................................................................................................ 69 

Ducati .............................................................................................................................. 70 

Honda ............................................................................................................................. 71 

Kawasaki ........................................................................................................................ 72 

MV Agusta .................................................................................................................... 72 

Suzuki .............................................................................................................................. 73 

Yamaha .......................................................................................................................... 73 

Ancillary Items .......................................................................................................... 74 

POLISHED 

100% 

STAINLESS STEEL 

UNC Stainless Steel ................................................................................................. 76 

Parts suitable for Harley Davidson® Motorcycles ..........................78/79 

Worldwide Distributors ........................................................................................ 80 

Display Stands ........................................................................................................... 81 

INDEX 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

1

HISTORY 

ABOUT US 

Established in 1999, Pro-Bolt is a family business based in the Cotswolds, 

England. We are the world-leading supplier of quality fasteners, 

motorcycle accessories, cycle parts and other components. 

We have a large range of products manufactured in the best materials 

available. This, incorporated with unique design and easy fitment of kits, 

provides an unbeatable combination. 

Our roots derive from all corners of the motorcycle industry, supplying 

products to customise, personalise, enhance looks and performance 

– offering an excellent alternative to lost, rusty or simply heavy bolts. 

From Streetfighters to Race Bikes, Enduro, Trail or Scooters, you’ll find 

our brochure packed with imaginative, exciting and sexy products to 

improve your machine. 

We supply Aluminium, Stainless Steel and Titanium, all offering their own 

strengths and benefits and each suitable for different applications. 

Aluminium and Titanium products suit any market where looks and 

weight are crucial to ensure success. As the world’s largest stockist of 

top quality Titanium fasteners, our product is in strong demand by Race 

Teams – British Superbikes Teams, World Superbike Teams and Moto 

GP Teams all use Pro-Bolt. This reliability of both service and product is 

proven on the track to serve you well on the road. 

Our range of Stainless Steel fasteners has proven a great success with 

products continually developing and growing. The unique design of the 

heads and quality of thread and finish is unparalleled. Each product is 

polished to a mirror finish. 

Pro-Bolt produce a separate 

catalogue containing many 

specialist products for the Cycle 

Market and Off-Road Bikes. These 

are available on request and can 

also be downloaded on-line via 

www.pro-bolt.com. 

Our expertise in polishing has 

opened up the market for 

cruisers which has traditionally 

been the domain of Chrome. 

Unfortunately, Chrome is 

only a coating and as such is prone 

to chipping, peeling and flaking even at 

the point of fitment. Unlike Chrome, our highly 

polished Stainless Steel offers strength along with an 

exceptional finish. Our new range of UNC bolts are available 

in unique head designs with rolled threads for added strength. 

We also now offer aftermarket model specific bolt kits suitable for 

Harley-Davidson® Motorcyles. Our fasteners exceed D.O.D, M.O.T and 

factory standards. 

As with any successful company our biggest strength is our staff and our 

dedicated team of enthusiasts is on hand to provide you with the very 

best technical support. 

We specialise in offering many ‘specific kits’ thus our motto: 

Having such an extensive range of fasteners in the most attractive 

materials means our products are distributed and used worldwide in 

many diverse industries. We supply fasteners for Motorcycles, Formula 3, 

Quad Bikes, Kart Kits, Cycle Sets, ATV’s, Powerboats, Model Making, 

Yachting, Wheelchairs, Furniture and for many Marine applications. 

2 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

ORDERING INFORMATION 

CONTACT INFORMATION 

Office hours: Monday-Thursday 9.00 - 5.30 Friday 8.00 - 4.00 

(Answerphone out of hours) 

Telephone: +44 (0) 1684 851940 

Fax: +44 (0) 1684 850080 

E-mail: sales@pro-bolt.com 

Web: www.pro-bolt.com 

Post: Pro-Bolt Ltd, Unit F, 6400 Severn Drive, 

Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF, UK. 

ORDERING 

• Visit one of our UK Stockists: See the quality of our products 

first hand. Phone for information or see our ‘dealer’ page 

via www.pro-bolt.com 

• Phone, fax or post: See above contact information 

• On-line: www.pro-bolt.com 

ON-LINE 

During UK office hours our on-line support feature is available. This 

live feature enables us to answer questions, confirm stock availability, 

provide advice and assist with navigating our website. 

If you are part of social networking, be the first to 

find out about our latest products and events by 

becoming a fan on Facebook. You can also find 

out about our products on YouTube. Our range is 

constantly evolving with new products which are 

regularly added to our website and broadcast on Facebook. 

GLOBAL WEBSITES 

Pro-Bolt has global websites based in several countries around the 

world, offering local sales support and advice using local language and 

currency. Please see our main website for details. 

DELIVERY OPTIONS 

We aim to deliver from stock in 1-2 days, but please allow 3 days before 

progressing your order. Delivery Options available are: 

• 1st Class Post: Deliveries requested 1st Class Post are not traceable 

and Pro-Bolt is not responsible for lost in transit or non-delivery. 

• Royal Mail Signed for: Signed Proof of Delivery is available once 

delivered, but this is non-traceable 

• Courier: Fully traceable courier service 

• Guaranteed Next Day: Deliveries before 9.30am and/or 1pm are 

available depending on delivery address 

PRICE LISTS & FITMENT GUIDES 

This catalogue is supplied with a separate Price List giving prices for 

individual bolts, packs, boxes and kits. Due to volatile material prices, 

Pro-Bolt reserves the right to change prices and discontinue products 

without notice. All retail prices in our Price List include VAT and are in 

Pounds Sterling. VAT will not be charged to retail customers outside of 

the EU. VAT will not be charged to registered business outside the EU, 

or in the EU if a valid VAT number is provided on placement of order. 

Where you see this symbol you should refer to our model 

specific fitment guide, as this is a product we measure & check. 

PAYMENT METHODS 

Credit or Debit Cards: Please have your card ready. We accept 

MasterCard, Visa, Delta, Solo, Maestro and American Express. 

Cheques: Payable to ‘Pro-Bolt’. Please allow 7 working days from receipt 

of cheque to allow clearance. 

Money Orders / Bank Drafts: On receipt of a Pro-Bolt pro-forma invoice, 

please send payable to ‘Pro-Bolt’ quoting your order number. 

PayPal: We can accept payment by PayPal – please ring for details. 

Bank Transfers: Pro-Bolt are able to offer pricing in Pounds Sterling, 

Euros or US Dollars – please contact us for relevant information. 

SHORTAGES/DAMAGED GOODS 

Missing parts or damaged goods must be advised within 48 hours of 

receipt. Please retain evidence of damaged packaging. 

DISCONTINUED PRODUCTS 

We may at any time discontinue products as we see fit. 

RETURNS 

To return a product, please contact us for a Returns Reference Number 

within 28 days of purchase. No goods will be accepted without a 

Returns Reference. Returned goods, supplied correctly, will be subject 

to a 10% restocking charge. Our freepost address is: Returns, Pro-Bolt 

Ltd, FREEPOST SWC4834, Severn Drive, Tewkesbury Business Park, 

Tewkesbury, Glos. GL20 8SF, UK. 

ACU DISCOUNTS 

Pro-Bolt offer registered ACU racers a 10% discount throughout our 

range. When ordering, please have your registration details to hand. 

UK STOCKIST & DEALERS 

Pro-Bolt has a network of Stockists who hold a wide range of our 

products - they will also order in specific kits and accessories for you. 

A list of Stockists can be found on our website. In addition we have 

a large number of registered Dealers who also supply and fit our 

products – from Tuning Shops and Engineering Companies to High 

Street Shops. Only registered businesses that re-sell products qualify for 

discounts. If you are interested in becoming a Stockist or Dealer, please 

contact sales@pro-bolt.com. 

OVERSEAS DISTRIBUTORS 

Pro-Bolt has a worldwide network of Distributors – please see page 80 

for details. Our website www.pro-bolt.com lists the most up to-date 

information. If you are interested in becoming a Distributor of our 

products, please contact sales@pro-bolt.com. 

TRADEMARKS 

Aprilia TM , BMW TM , Brembo TM , Cagiva TM , Ducati TM , Harley-Davidson®, 

Kawasaki TM , MV Agusta TM , Nissin TM , Sumitomo TM , Suzuki TM , Tokico TM , 

Triumph TM , Yamaha TM are registered trademarks, here used only as 

a reference. 

PRO-BOLT COPYRIGHT 

Pro-Bolt is a registered trade mark. Photography and the information 

present in this catalogue are the property of Pro-Bolt. All rights 

are reserved. 

ORDERING INFO 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

3

MATERIAL INFO 

MEASURING ASSISTANCE AND 

MATERIAL INFORMATION 

ORDERING INDIVIDUAL BOLTS 

All fasteners are available individually in any quantity. When ordering 

we offer the following advice and general information to assist. Our 

individual bolt part numbers detail the actual product as follows in this 

sequence. 

• Material 

Aluminium, Stainless Steel or Titanium. 

• Head Style 

Flanged Hex Head, Tapered Socket Cap, Countersunk etc. 

• Shank Diameter 

M8 (8mm), M10 (10 mm), etc. 

• Shank Length 

Measured from beneath the head (with the exception of 

countersunk bolts - where length includes the head). 

• Thread Pitch (if other than standard) 

The distance from the crest of one thread to the next. 

• The Colour Finish (if available/required) 

Aluminium: Black, Blue, Gold, Gunmetal Grey, Orange, 

Purple, Red & Silver 

Stainless Steel: Polished Finish 

Titanium: Natural Finish, Blue, Gold & Purple Haze. 

• Quantity Required 

• Part Numbers 

TIHX835G 

LSSCS625 

Titanium Flanged Hex Head, M8 Thread Diameter x 

35mm length under the head in gold. 

Stainless Steel Countersunk Bolt, M6 Thread Diameter 

x 25mm long. 

PRO GAUGE MEASURING TOOL – A USEFUL AID 

Take the guesswork out of measuring Metric bolts. We offer a 

Pro-Gauge to make measuring easier, you’ll find it an essential tool 

box item. 

• Teeth for Gauging Thread Pitch 

0.7mm – 1.75mm teeth to match to your original bolts. 

• Holes to Gauge Thread Diameter 

M4 to M12. The smallest hole which the bolt will fit through 

cleanly, without screwing it through, gives the thread diameter. 

• To Measure Length of Bolt 

Place the under head of bolt to the edge of the tool to obtain the 

length of your original bolts (with the exception of countersunk 

bolts where the length should include the head). 

GENERAL THREAD INFORMATION 

Shorter bolts of 25mm or less will usually be fully threaded, whilst 

longer bolts usually have a grip length and 25mm of thread. The 

thread pitch of a standard metric screw corresponds to the bolt 

diameter. It is the distance from one peak of the thread to the next. A 

metric screw thread is specified by how far in millimetres it advances 

in one turn of the screw. For example, if one turn brings it 1mm closer, 

then it is a 1mm pitch. These are the industry standard thread pitches: 

Diameter M3 M4 M5 M6 M8 M10 M10 

fine 

M12 

M12 

fine 

M12 x 

fine 

Pitch (mm) 0.5 0.7 0.8 1.00 1.25 1.50 1.25 1.75 1.50 1.25 

For fasteners where the head usually sits above the surface, the 

measurement is taken from directly under the head to the end of 

the fastener. For fasteners that are designed to be countersunk, the 

measurement is made from the flat of the head (where the surface 

of the material is), to the end of the fastener. 

BOLT CONFIGURATION 

Head 

The head is designed to provide a wrenching surface to tighten 

the bolt to the correct preload. Its size of bearing area depends on 

the stress level and the hardness of the material being fastened. 

There must be enough bearing surface to prevent indentation of 

the material under preload. To minimise the effects of fatigue, a bolt 

should be tightened or preloaded to an initial clamping load in excess 

of the maximum working load of the joint. 

Fillet 

This area of structural discontinuity is a critical point of stress 

concentration. The radius where head and shank meet must be 

smooth and free from flaws. It should be as large as practical and still 

provide the necessary bearing area under the head. 

Grip Length 

Minimum grip length from protruding head bolts shall not be less than 

the head-to-shank fillet radius. 

Shank 

The shank must be fully concentric with the thread and with the head. 

To reduce bending moments, the angle between head and shank 

axis must be kept to a minimum. The fit between bolt shank and 

mating hole must be kept to a very close tolerance to maximise shear 

strength. 

Thread & Pitch 

The two most critical thread factors for high strength/high fatigue 

rating are a generous root radius to minimise notch effect and 

compressive pressurising achieved by rolling threads after heat 

treatment. The pitch diameters must also be closely controlled for high 

fatigue applications. Where lock nuts will be used, thread point chamfer 

must be kept to a minimum. Where thread run-out flares into the 

shank, there should be no abrupt changes in the cross sectional area. 

Overall Length 

Shank 

Diameter 

Fillet 

Thread Length 

Grip Length 

Head 

Height 

4 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

ALUMINIUM 

Aluminium 

To customise your machine, we offer a wide range of fasteners 

and accessories. This ever increasing range allows you to create 

a unique look and style. You can customise your machine little 

by little, or make large-scale changes; either way you will be 

guaranteed colour consistent parts throughout that are machined 

to a high quality smooth finish. We offer model specific kits for 

Motorcycles, Cycle Sets and Rocker Cover Kits. Our lightweight 

bolt kits are available for a huge number of bikes, enabling you to 

change Engine Casing Bolts, Fairing Bolts, Screen Bolts and Fuel 

Cap Surround Bolts with no need to measure your originals - we’ve 

done it for you! Whichever bike you ride you are sure to find 

goodies that are fun, functional and make your bike unique and 

stand out from the crowd. All our kits and accessories are available 

in a choice of Black, Blue, Gold, Gunmetal Grey, Orange, Purple, 

Red and Silver. 

• Manufacturing process: Head: cold formed; Shank: thread rolled. 

• Anodising: Chemically brightened and colour anodised to 

between 8 and 12 microns thick. 

• Weight: 60% lighter than steel – 40% lighter than Titanium. 

• Corrosion: Saltwater, road film or mild acids do not affect 

anodised aluminium. 

• Application: Aluminium is suitable for use in all non-safety 

critical areas – mudguards, screens, fairings, engine casings, 

huggers, fuel caps, number plates, lamp units, exhaust cans, heel 

plates, exhaust manifold brackets, fuel cap surround, air filter, 

car rocker covers, plus many more. Aluminium is not suitable 

for any stress area applications. If you are in any doubt as to 

the suitability of our products for your machine, or the size you 

need, please contact Pro-Bolt direct. 

MATERIAL PROPERTIES 

• Density: ......................................................................................2730 kg/m 3 (170lb/ft 3 ) 

• Young’s Modulus: ................................................................... 72GPa (10.4 x 10 6 psi) 

• Yield Strength: ........................................................................505MPa (73.2 x 10 3 psi) 

• Ultimate Tensile Strength: ...............................................570MPa (82.7 x 10 3 psi) 

• Compressive Strength: ......................................................505MPa (73.2 x 10 3 psi) 

• Shear Modulus: .......................................................................27GPa (3.92 x 106psi) 

• Shear Strength: ..................................................................... 330MPa (47.9 x 103psi) 

• Ductility: ...............................................................................10% elongation at break 

• Poisson’s Ratio: ............................................................................................................... 0.33 

• Hardness: .............................................................................................................150 Brinell 

• Strength-to-Weight Ratio: ..................................................................... 185 kNm/kg 

• Stiffness-to-Weight Ratio: .................................................................. 26.4 MNm/kg 

Thread 

Diameter 

ALL AVAILABLE IN A CHOICE OF 8 COLOURS: 

BLACK • BLUE • GOLD • GUNMETAL GREY 

ORANGE • PURPLE • RED • SILVER 

Material Tensile 

Stress Area (mm 2 ) 

Max Load 

(kN) 

Total Elongation 

(mm) 

6mm 20.1 11.58 0.56 

8mm 36.6 23.19 0.62 

10mm 58.0 39.17 1.05 

Torque & Lubrication: Where we offer model specific replacement 

Bolt Kits, Aluminium is a softer and weaker alternative to the original 

bolts being replaced, so a lower torque is required to prevent damage 

to your Pro-Bolt fastener. 

Where individual bolts are purchased, torque guides vary depending 

on the material, manufacturing method, thread diameter, pitch and 

head style. This torque information can be supplied 

on request, or downloaded via www.pro-bolt.com in 

a separate document entitled ‘Material Information’ 

wherever you see the icon shown here. 

For general use fasteners we recommend an anti-seize or a copper 

based lubricant be applied to the threads in order to prevent seizing. 

If you are in any doubt as to the suitability, torque settings of our 

products for your specific application, please do not hesitate to 

contact us prior to fitment. 

MATERIAL INFO 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

5

MATERIAL INFO 


Stainless Steel 

ALL AVAILABLE IN POLISHED STAINLESS 

Fit & Forget! Manufactured from 316 Stainless Steel, which is superior in 

strength and corrosion resistance, we are proud to offer an exceptional 

quality product. Pro-Bolt is the first to provide Tapered Socket Caps, 

Flanged Hex Heads and Domed/Mushroom Fairing Bolts. We are 

offering a quality grade material in unique head styles – and to a 

polished mirror finish. Absolutely no polishing is required. Forget rough 

nuts and take a close look at our buffed nuts! No stamp marks in the 

bolt heads or cracked and grainy finishes. No matter how many dark 

winter nights you spend polishing mass-produced lesser quality bolts, 

you will never achieve the quality of finish and material we offer. Please 

be aware that not all Stainless Steel is suitable for stress areas. However, 

our 316 Stainless Steel is suitable for Engine Casings, Fairings, Screens, 

Front Axle Pinch Bolts, Caliper Pinch Bolts, Caliper Mount Bolts, Footrest 

Hanger Bolts, Clip-On Handle Bar Bolts, Brake/ Clutch Pinch Perch Bolts, 

Top/Bottom Yoke Clamp Bolts. Also available are 1/4 Turn D-Ring Quick 

Release Fasteners, 1/4 Turn Allen Key Drive Quick Release Fasteners, 

Brake Caliper Pad Pins, Axle Nuts, Banjo Bolts, Bleed Nipples and 

Motorcycle Disc Rotor Bolts. 

• Material specification – 316. 

• Manufacturing process: We manufacture in a single process on multi 

axis CNC machining centres, which includes thread rolling. Thread 

standards are to BS3692:1967 which is the British Standard for ISO 

Precision Metric Threads. Route radii vary between 0.8mm and 0.4mm. 

This is the maximum that we can use and improves shear strength. 

Thread lead varies between K1 and K2. 

The head and shank are Pro-Bolt’s own designs, which have been 

successfully tested in the field for the last four years. 

• Stainless Steels are iron alloys with a minimum of 10.5% Chromium 

with other elements (Nickel, Molybdenum, Titanium, Copper, Carbon, 

Nitrogen) added to enhance properties such as formability and 

strength. It is the chromium-rich, oxide film that gives the corrosion 

resistance of Stainless Steel. This protective film is strong and 

chemically stable (i.e. passive) where there is sufficient oxygen on the 

surface. This protection is extremely thin and will usually self-repair if 

sufficient oxygen is available. Please note: Under certain conditions 

the passive state can be broken down and corrosion can result. 

• Heat Resistance: 316 has good resistance to oxidation in continuous 

service to 870 o C and intermittent service to 925 o C. However, continuous 

use at 425-860 o C is not recommended due to its resistance to carbide 

precipitation. Where high strength is required at temperatures above 

500 o C, Grade 316H is recommended. 

• Alloy Designations: Stainless Steel 316 corresponds to the following 

standard designations and specifications: 


• Density: ...................................................................................... 8030 kg/m 3 (501lb/ft 3 ) 

• Young’s Modulus: .......................................................................193GPa (28 x 10 6 psi) 

• Yield Strength: ........................................................................ 260MPa (37.7 x 10 3 psi) 

• Ultimate Tensile Strength: ............................................... 570MPa (82.7 x 10 3 psi) 

• Compressive Strength: ...................................................... 260MPa (37.7 x 10 3 psi) 

• Shear Modulus: .........................................................................78GPa (11.3 x 10 6 psi) 

• Ductility: .......................................................................... 40% elongation at break + 

• Minimum value allowed by ...................................................................ASTM A240 

• Poisson’s Ratio: ................................................................................................................0.27 

• Hardness: .................................................................................................95 Rockwell B + 

• Maximum value allowed by ..................................................................ASTM A240 

• Strength-to-Weight Ratio: ..................................................................... 32.4kNm/kg 

• Stiffness-to-Weight Ratio: ...................................................................... 24 M Nm/kg 

Thread 

Diameter 



Max Load 

(kN) 


(mm) 

6mm 20.1 16.40 1.93 

8mm 36.6 29.15 2.85 

10mm 58.0 46.89 3.70 


Bolt Kits please, use your manufacturer’s recommended torque 

settings. Disc Rotor Bolts are the only exception and have a lower 

setting which we specify in the product packaging. 







For general use fasteners, we recommend an anti-seize or a copper 

based lubricant be applied to the threads in order to prevent galling, 

the exception being bleed nipples and banjo bolts which should be 

fitted dry. For bolts in safety critical areas, we recommend a medium 

strength threadlock. 




6 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

TITANIUM 

Titanium 

Made from aircraft grade Titanium 6AL-4V (grade 5), the outstanding 

benefits are that we roll the threads to produce greater fatigue 

strength and reduce galling. These bolts are in excess of 120,000psi 

ultimate tensile strength, suitable to replace both Grade 5 and Grade 

8 steel bolts. We carry the UK’s widest range of products for the 

automotive industry. We offer Flanged Hex Head, Tapered Socket Cap, 

Countersunk, and Dome Head Bolts, Nuts and Washers – from 3mm 

to 12mm. We also offer Axle Nuts, Swingarm Nuts, Yoke Nuts, Caliper 

Pins, Banjo Bolts, Disc Bolts and many more specifically machined 

items. For motorcyclists we have made it so easy to replace bolts 

in stress areas by doing all the measuring for you, and offering the 

relevant fasteners in kit form. All our Titanium nuts, bolts, washers 

and specially machined items are available in natural, blue, gold and 

purple haze, with the exception of our Race-Spec range which has a 

factory finish. 

• Ti-6Al-4V, an alloy introduced in 1954, is a good general purpose 

grade. Titanium alloy is available in all product forms. Its density 

is 0.160 pounds per cubic inch. It can be heat-treated to ultimate 

strengths in excess of 170,000psi and responds to heat treatment 

in sections up to 15mm. This alloy is stable at temperatures ranging 

from 423 o F to over 1000 o F. 

• Manufacturing process: We manufacture in a single process on 

multi axis CNC machining centres, which includes thread rolling. 

Thread standards are to BS3692:1967 which is the British Standard 

for ISO Precision Metric Threads. Route radii vary between 0.8mm 

and 0.4mm. This is the maximum that we can use and improves 

shear strength. Thread lead varies between K1 and K2. 

• Other Items: Machined from bar. 

• Weight: 42% lighter than steel. 

Thread 

Diameter 


BLUE • GOLD • NATURAL • PURPLE HAZE 



Max Load 

(kN) 


(mm) 

6mm 20.1 21.25 0.54 

8mm 36.6 36.78 0.48 

10mm 58.0 53.53 1.45 


Bolt Kits please, use your manufacturer’s recommended torque 

settings. Disc Rotor Bolts are the only exception and have a lower 

setting which we specify in the product packaging. 







For general use fasteners, we recommend an anti-seize or a copper 

based lubricant be applied to the threads in order to prevent galling, 

the exception being bleed nipples and banjo bolts which should be 

fitted dry. For bolts in safety critical areas, we recommend a medium 

strength threadlock. 





Material Information 

• Density: ......................................................................................4420 kg/m 3 (276lb/ft 3 ) 

• Young’s Modulus: ...................................................................... 110GPa (16 x 10 6 psi) 

• Yield Strength: ....................................................................... 828 MPa (120 x 10 3 psi) 

• Ultimate Tensile Strength: .............................................1030MPa (149 x 10 3 psi) 

• Compressive Strength: .......................................................960MPa (139 x 10 3 psi) 

• Shear Modulus: ........................................................................ 43GPa (6.24 x 10 6 psi) 

• Ductility: ...............................................................................10% elongation at break 

• Poisson’s Ratio: ............................................................................................................... 0.34 

• Hardness: .....................................................................................................36 Rockwell C 

• Maximum value allowed by ................................................................. ASTM A240 

• Strength-to-Weight Ratio ........................................................................187kNm/kg 

• Stiffness-to-Weight Ratio ......................................................................24.9MNm/kg 

MATERIAL INFO 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

7

PRODUCT PROFILES 

Note: Not all sizes are available in ALL materials, 

please refer to relevant material section. 

Standard Allen Key Socket Cap Bolts 

M3 (0.5) 

M6 (1.00) 

M4 (0.7) 

M8 (1.25) 

M5 (0.8) 

Tapered Socket Cap Bolts 

M4 (0.7) 

M5 (0.8) 

M6 (1.00) 

M7 (1.00) 

M8 (1.25) 

M10 (1.50) also available in fine (1.25) pitch 

45 50 55 60 65 70 75 80 

8 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Flanged Hex Head Bolts 

M4 (0.7) 

M5 (0.8) 

M12 (1.25) 

M6 (1.00) 

M8 (1.25) 

M10 (1.50) 

• also available in fine (1.25) pitch 

• longer lengths available in fine (1.25) pitch 

Countersunk Bolts 

M4 (0.7) M6 (1.00) 

M5 (0.8) 

M8 (1.25 ) 

Dome Head/Fairing Bolts 

8 mm 

16 mm 

16 mm 

M4 (0.5/0.7) 

M6 (1.00) 

M8 (1.25) 

12 mm 

M5 (0.8) 

12 mm 

M6 (1.00) 

16 mm 

M5 (0.8) 

18 mm 

M10 (1.25) 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

9


Note: Not all sizes are available in ALL materials, 

please refer to relevant material section. 

Flat Washers 

M3 

M4 

M5 

M5 

M5 

7 mm 

9 mm 

10 mm 

15 mm 

20 mm 

M6 

M6 

M6 

M6 

M6 

M6 

12 mm 

15 mm 

18 mm 

20 mm 

25 mm 

30 mm 

M8 

M8 

M8 

M10 

16 mm 

20 mm 

30 mm 

20 mm 

M12 

M14 

M16 

24 mm 

28 mm 

30 mm 

Drilled Washers 

M5 

M6 

M6 

M8 

M10 

M12 

10 mm 

12 mm 

23 mm 

16 mm 

20 mm 

25 mm 

Countersunk Bodywork Washers 

M5 

13 mm 

M6 

19 mm 

M6 

22 mm 

M8 

25 mm 

10 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Race Spec Bolts 

12 

10 mm 

M5 (0.80) 

10 15 

20 

25 

11 mm 

M6 (1.00) 

14 18 22 28 

16 

10 15 20 

12 

25 

30 35 40 45 50 55 60 65 70 75 80 85 90 

32 

11 mm 15 mm 

17 mm 

M7 (1.00) 

20 

M8 (1.25) 

15 20 

M10 (1.25) 

25 

28 

40 50 60 80 

30 35 40 45 50 55 60 65 70 75 80 85 90 

32 

20 

25 

30 35 40 45 50 55 60 65 70 75 80 90 

Race Spec Bodywork Bolts 

C 

12 mm 16 mm 

16 mm 

M5 (0.80) 

M6 (1.00) 

16 

M8 (1.25) 

12 16 20 25 

25 

Break Edge 

45 o x 0.5 

30 

D 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

11


Available individually or in packs of 5/10 

BOLTS 

Standard Allen Key Socket Cap Bolts 

M3 Thread Diameter (2mm Allen Key) 

Part Number Thread & Pitch Length 

LPB308 M3 x 0.5mm 8mm 

LPB310 M3 x 0.5mm 10mm 

LPB330 M3 x 0.5mm 30mm 

Length measurements are 

taken from below the head 





LPB410 M4 x 0.7mm 10mm 

LPB420 M4 x 0.7mm 20mm 

LPB435 M4 x 0.7mm 35mm 





LPB508 M5 x 0.8mm 8mm 

LPB510 M5 x 0.8mm 10mm 

LPB512 M5 x 0.8mm 12mm 

LPB516 M5 x 0.8mm 16mm 

LPB520 M5 x 0.8mm 20mm 

LPB525 M5 x 0.8mm 25mm 

LPB530 M5 x 0.8mm 30mm 

LPB540 M5 x 0.8mm 40mm 

LPB545 M5 x 0.8mm 45mm 





LPB610 M6 x 1.00mm 10mm 

LPB612 M6 x 1.00mm 12mm 

LPB616 M6 x 1.00mm 16mm 

LPB620 M6 x 1.00mm 20mm 

LPB625 M6 x 1.00mm 25mm 

LPB630 M6 x 1.00mm 30mm 

LPB635 M6 x 1.00mm 35mm 

LPB640 M6 x 1.00mm 40mm 

LPB645 M6 x 1.00mm 45mm 

LPB650 M6 x 1.00mm 50mm 

LPB655 M6 x 1.00mm 55mm 

LPB660 M6 x 1.00mm 60mm 

LPB665 M6 x 1.00mm 65mm 

LPB670 M6 x 1.00mm 70mm 

LPB675 M6 x 1.00mm 75mm 

LPB680 M6 x 1.00mm 80mm 

LPB685 M6 x 1.00mm 85mm 

LPB690 M6 x 1.00mm 90mm 

LPB695 M6 x 1.00mm 95mm 

LPB6100 M6 x 1.00mm 100mm 

12 

sales 0044 (0) 1684 851940 

www.pro-bolt.com



LPB812 M8 x 1.25mm 12mm 

LPB820 M8 x 1.25mm 20mm 

LPB825 M8 x 1.25mm 25mm 

LPB830 M8 x 1.25mm 30mm 

LPB835 M8 x 1.25mm 35mm 

LPB840 M8 x 1.25mm 40mm 

LPB860 M8 x 1.25mm 60mm 



Aluminium 




Countersunk Bolts Length measurements include the head 

Part Number Thread & Pitch Length Allen Key Size 

LCS415 M4 x 0.7mm 15mm 2.5 

LCS420 M4 x 0.7mm 20mm 2.5 

LCS445 M4 x 0.7mm 45mm 2.5 

LCS450 M4 x 0.7mm 50mm 2.5 

LCS520 M5 x 0.8mm 20mm 3 

LCS530 M5 x 0.8mm 30mm 3 

LCS535 M5 x 0.8mm 35mm 3 

LCS615 M6 x 1.00mm 15mm 4 

LCS625 M6 x 1.00mm 25mm 4 

LCS635 M6 x 1.0mm 35mm 4 

LCS820 M8 x 1.25mm 20mm 6 

LCS840 M8 x 1.25mm 40mm 6 




Part Number Thread & Pitch Length Allen Key Size 

LFB412F M4 x 0.5mm (12mm head) 12mm 2.5 

LFB412 M4 x 0.7mm (12mm head) 12mm 2.5 

LFB425 M4 x 0.7mm (12mm head) 25mm 2.5 

LFB512 M5 x 0.8mm (12mm head) 12mm 3 


LFB516XL M5 x 0.8mm (16mm head) 16mm 3 





LFB620XS M6 x 1.00mm (12mm head) 20mm 4 



LFB630XS M6 x 1.00mm (12mm head) 30mm 4 





Honda Special Fuel Cap Bolts 


LH465 M4 x 0.7mm (10mm head diameter) 6.5mm 

LH420 M4 x 0.7mm (10mm head diameter) 20mm 



ALUMINIUM 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

13


NUTS 

Full Nuts 

Part Number Thread & Pitch Socket Size 

LFN5 M5 x 0.8mm 8mm 


LFN6LH (Left Hand Thread) M6 x 1.00mm 10mm 


Nyloc Nuts 


LNYN4 M4 x 0.7mm 7mm 




Dome Nuts 

Part Number Thread & Pitch Socket Size Height 

LDOMENUT4 M4 x 0.7mm 7mm 8mm 




LDOMENUT10F M10 x 1.25mm 17mm 18mm 


WASHERS 

Flat Washers 

Part Number 

Inside 

Diameter 

Outside 

Diameter 

Thickness 

LWA3 M3 7mm o/d 0.55mm 




LWA6-18 M6 18mm o/d 1.40mm 


LWA8-20 M8 20mm o/d 1.60mm 

LWA10 M10 20mm o/d 1.77mm 


Part Number 

Inside 

Diameter 

Outside 

Diameter 

Thickness 

LWAD5 M5 10mm 1.30mm 


LWAD6-23 M6 23mm 1.50mm 


LWAD10 M10 20mm 2.80mm 

LWAD12 M12 25mm 3.40mm 

Countersunk Bodywork Washers 

Part Number 

Inside 

Diameter 

Outside 

Diameter 

Thickness 

LWAC5 M5 13mm o/d 3.20mm 

LWAC6-19 M6 19mm o/d 3.40mm 

LWAC6-22 M6 22mm o/d 3.40mm 

LWAC8 M8 25mm o/d 5.00mm 

Flared Washers 

Manufactured to be fitted with a 

6mm standard socket cap bolt 

Part Number 

Inside 

Diameter 

Outside 

Diameter 

Thickness 

LWAPB625 M6 25mm o/d 7.00mm 

14 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

RACE-SPEC BOLTS 

Aluminium 

Race-Spec Hex Head Bolts 

New Bolt Range in 7075 Aluminium machined with Rolled 

Threads for superior strength. Our Race Spec bolts are 

widely used by Racers, enthusiasts and those who like 

attention to detail. The heads are pre-drilled on the flats 

for ease of lockwiring and etched with the Pro-Bolt name. 

Our Aluminium Race Spec Bolts represent an outstanding 

62% weight saving over equivalent sized steel bolts. 




Part 

Number 

Thread/ 

Pitch 

Length 

Thread 

Length 

Flange 

Diameter 

Socket 

Size 

LHX510R M5 x 0.8mm 10mm 10mm 10mm 6mm 

LHX520R M5 x 0.8mm 20mm 20mm 10mm 6mm 

LHX620RE M6 x 1.00mm 20mm 20mm 12mm 8mm 






















LHX1030FRE M10 x 1.25mm 30mm 30mm 17mm 12mm 



Race-Spec Body Bolts 

New Bodywork Bolt Range in 7075 Aluminium machined 

with Rolled Threads for superior strength. These bolts 

are perfect for plastics/bodywork where the large 

diameter will prevent bolts 'pulling through' bodywork. 

The external hex drive on the head offers enhanced 

strength. The heads are pre-drilled on the flats for ease 

of lockwiring. Our Aluminium Race Spec Bolts represent 

an outstanding 62% weight saving over equivalent sized 

steel bolts. 

Part Thread/ 

Thread Flange Socket 

Length 

Number Pitch 

Length Diameter Size 

LBWHX516R M5 x 0.8mm 16mm 16mm 16mm 6mm 







ALUMINIUM 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

15

FINISHING TOUCHES 

Button Inserts 

Push-in button inserts are ideal for covering stress 

areas and non stress bolts, keeping out the dirt or 

for an effective colour contrast. Push-in buttons fit 

into the head of a standard allen key socket cap 

bolt and are held in place with a rubber 'O' ring. 

When ordering, please note sizes are taken from 

the thread diameter of the corresponding bolt 

– NOT the allen key drive. 

Available individually in the following sizes: 

Part 

Number 

Description 

Outside 

Diameter 

LBUT5 5mm Button Insert 7.8mm 4 

LBUT6 6mm button insert 9.3mm 5 



To Suit Allen 

Key Size 

Cup Washers 

The cup washer slides up the thread of the bolt 

and shrouds the head, leaving the head surface 

exposed. Good way to colour contrast – try these 

with a different coloured Aluminium bolt for a truly 

unique look. Available in the following sizes: 

Part 

Number 

Description 

Outside 

Diameter 

LWACP5 5mm Cup Washer 10.6mm 




Hose Separators 

Don’t let your lines rub you up the wrong way! 

Separate them with these neat little additions. 

Supplied with a colour co-ordinated Countersunk 

Bolt and Nyloc Nut to clamp a 7mm hose. 

Part 

Number 

HOSESEP10 

Description 

Brake line hose separator kit 

16 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

P Clips 

Anodised Aluminium rubber lined P-Clips for 

securing rear brake lines. 

Part Number Description 

PCLIP10 

Rubber lined P-Clips 

Aluminium 




Tyre Valve Covers 

Form an airtight seal and keep out the dirt with 

our Tyre Valve Covers - universal fit for bikes, cars 

and cycles. 


LDCAP10 Individually 

2DCAP10 Pair of Dust Caps 

4DCAP10 Set of 4 Dust Caps 

Bleed Nipple Covers 

Keeps dust and grime away from your nipples! 

Slides straight onto the bleed nipple and held 

securely in place with the 'O' ring supplied. 

Fits the most popular 7mm bleed nipples. 


LBNCOVER Individual 

BNCOVER7-2 Pair of Covers with 'O' Rings 

BNCOVER7-3 Set of 3 Covers with 'O' Rings 

Flared Washers 

‘Chunky’ Cup Washer, designed to accept either 

a standard M6 Socket Cap Bolt or a Countersunk 

Bolt. The outside diameter measures 25mm and 

has a height of 7mm. Excellent for spreading the 

load on deeper recessed panels. 

ALUMINIUM 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

17


BOLTS 

** Denotes length to be selected. 

Tapered Socket Cap Length measurements are taken from below the head 

Part 

Number 

Thread 

Diameter/Pitch 

Allen Key 

Drive 

Max Head 

Diameter 

Lengths Available 

LSSSC5** M5 x 0.8mm 4mm 7.9mm 10mm, 12mm, 15mm, 20mm, 

25mm, 30mm 


25mm, 30mm, 35mm, 40mm, 

45mm, 50mm, 55mm, 60mm, 

65mm, 70mm, 75mm, 80mm, 

85mm, 90mm, 95mm 


35mm, 40mm, 45mm, 50mm, 

55mm, 60mm, 65mm, 70mm, 

75mm, 

LSSSC10** M10 x 1.50mm 8mm 15.8mm 20mm, 25mm 

LSSSC10**F M10 x 1.25mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm, 

40mm, 45mm, 50mm, 55mm, 

60mm, 65mm, 70mm, 75mm, 

80mm, 85mm 

Flanged Hex Head Length measurements are taken from below the head 

Part 

Number 

Thread 


Socket 

Size 

Max Head 

Diameter 


LSSHX5** M5 x 0.8mm 7mm 9.9mm 10mm, 12mm, 15mm, 20mm, 25mm, 

30mm, 35mm 


30mm, 35mm, 40mm, 45mm, 50mm, 

55mm, 60mm, 65mm, 70mm, 75mm, 

80mm, 85mm, 90mm 


40mm, 45mm, 50mm, 55mm, 60mm, 

65mm, 70mm, 75mm 

LSSHX10** F M10 x 1.25mm 13mm 17.8mm 20mm, 25mm, 30mm, 35mm, 40mm, 

45mm, 50mm, 52mm, 55mm, 57mm, 

60mm, 65mm, 70mm, 75mm, 80mm 

Countersunk Bolts Length measurements are taken including the head 

Part 

Number 

Thread 


Allen Key 

Drive 

Max Head 

Diameter 


LSSCS5** M5 x 0.8mm 3mm 10.0mm 15mm, 20mm, 25mm 

LSSCS6** M6 x 1.00mm 4mm 12.0mm 15mm, 25mm, 30mm, 35mm, 

40mm, 60mm 

LSSCS8** M8 x 1.25mm 5mm 15.7mm 30mm, 40mm 

18 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Race Spec Bolts Length measurements are taken from below the head 

Part 

Number 

Thread 


Socket 

size 

Max Head 

Diameter 


LSSHX6** M6 x 1.00mm 8mm 11.0mm 10mm, 15mm, 20mm, 

25mm 

LSSHX8** M8 x 1.25mm 10mm 15.0mm 25mm, 30mm, 35mm, 

40mm, 45mm 

LSSHX10** M10 x 1.50mm 12mm 17.0mm 25mm 

LSSHX10**F M10 x 1.25mm 12mm 17.0mm 30mm, 60mm, 65mm, 

70mm, 75mm 



Parallel Head Bolts Length measurements are taken from below the head 

Part 

Number 

Thread 


Allen key 

size 

Max Head 

Diameter 


LSSPB5** M5 x 0.8mm 4mm 8.0mm 8mm, 10mm, 12mm, 

16mm, 20mm, 25mm, 

30mm 

LSSPB6** M6 x 1.00mm 5mm 10.0mm 10mm, 12mm, 16mm, 

20mm 

LSSPB8** M8 x 1.25mm 6mm 12.5mm 40mm, 45mm 

LSSPB10** M10 x 1.25mm 8mm 25mm 60mm 

Spike Head Bolts Length measurements are taken from below the head 

Part 

Number 

Thread 


Socket 

size 

Max Head 

Diameter 


LSSSK6** M6 x 1.00mm 6mm 10.0mm 10mm, 12mm, 15mm, 

20mm, 25mm, 27mm, 

30mm, 35mm, 40mm, 

45mm, 50mm, 55mm, 

60mm, 65mm, 70mm, 

75mm, 80mm, 85mm, 

90mm 

See page 76 for our UNC Imperial range. 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

19


Dome Head/Fairing Bolts Length measurements are taken from below the head 

Part 

Number 

Thread 


Allen Key 

Drive 

Max Head 

Diameter 


LSSFB412F M4 (0.50) 3mm 8mm 12mm 

LSSFB5** M5 (0.8) 4mm 12mm 12mm, 16mm, 20mm, 25mm 

LSSFB516XL M5 (0.8) 4mm 16mm 16mm 

LSSFB6** M6 (1.00) 5mm 16mm 16mm, 20mm, 25mm, 30mm, 

35mm, 40mm 

LSSFB6**XS M6 (1.00) 5mm 12mm 16mm, 20mm, 30mm 

LSSFB8** M8 (1.25) 5mm 16mm 20mm, 25mm, 30mm, 35mm, 

40mm 

LSSFB10**F M10 (1.25) 6mm 18mm 25mm, 30mm, 35mm 

NUTS & WASHERS 

Flanged Nuts 

Part Number Thread/Pitch Socket Size 

LSSFLN5 M5 x 0.8mm 8mm 




LSSFLN10F M10 x 1.25mm 14mm 

LSSFLN10FF M10 x 1.00mm 14mm 

LSSFLN12FF M12 x 1.25mm 15mm 

Dome Nuts 

Part Number Thread/Pitch Socket Size 

LSSDOMENUT6 M6 x 1.00mm 10mm 

LSSDOMENUT8 M8 x 1.25mm 13mm 

Flat Washers 

Part Number 

Inside 

Diameter 

Outside 

Diameter 

Thickness 

LSSWA6 6mm 12mm o/d 1.6mm 

LSSWA6-15 8mm 15mm o/d 1.6mm 



Countersunk Washers 

Part Number Size Outside Diameter Thickness 

LSSWAC5-15 M5 15mm 4mm 

LSSWAC6-19 M6 19mm 4.5mm 



20 

sales 0044 (0) 1684 851940 

www.pro-bolt.com




mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

21

RACE-SPEC 

RACE SPEC HEX HEAD 

A New Generation of Bolt! 

Our Race-Spec bolts are designed for professionals, enthusiasts 

and those who like attention to detail. By reducing the socket 

size/head diameter and machining out the head, we have 

achieved a significant weight saving. On average these bolts 

weigh 45% less than steel equivalents without any compromise in 

strength or durability. 

These products have been developed at the cutting edge of 

competition and the qualities are recognized and widely used by 

top Race Teams internationally. 

It is possible to save an amazing two kilos on an average 

motorcycle. This range of bolts are supplied 'off the machine 

with no polishing' to give the factory look. 

Length measurements are taken from below the head. 

Part 

Number 

Diameter 

& Thread 

Length 

Thread 

Length 

Head 

Diameter 

Socket 

Size 

TIHX510R M5 x 0.8mm 10mm 10mm 10mm 7mm 






































22 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Titanium 

Selected lengths now available 

in Stainless Steel (See page 19). 

ALL AVAILABLE IN MACHINE FACTORY FINISH 

Part 

Number 

Diameter 

& Thread 

Length 

Thread 

Length 

Head 

Diameter 

Socket 

Size 












TIHX1020FR M10 x 1.25mm 20mm 20mm 17mm 12mm 
















mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

23


BOLTS 

** Denotes length to be selected 

Tapered Socket Cap Length measurements are taken from below the head 

Part 

Number 

Thread 

& Pitch 

Allen Key 

Drive 

Max Head 

Diameter 


TISC4** M4 x 0.70mm 3mm 6.9mm 10mm, 12mm, 15mm, 20mm, 

25mm, 35mm 


25mm, 30mm, 35mm, 40mm, 

45mm, 50mm, 55mm, 70mm 


22mm, 25mm, 28mm 30mm, 

35mm, 40mm, 45mm, 50mm, 

55mm, 60mm, 65mm, 70mm, 

75mm, 80mm, 85mm, 90mm, 

95mm, 100mm, 115mm 

TISC720 M7 x 1.00mm 5mm 9.9mm 20mm 


35mm, 40mm, 45mm, 50mm, 

55mm, 60mm, 65mm, 70mm, 

75mm, 80mm, 85mm, 90mm, 

95mm, 100mm 


40mm, 45mm, 50mm, 55mm, 

70mm, 75mm, 80mm 

TISC10**F M10 x 1.25mm 8mm 15.8mm 20mm, 25mm, 30mm, 35mm, 

40mm, 45mm, 50mm, 55mm, 

60mm, 65mm, 70mm, 75mm, 

80mm, 85mm 

Flanged Hex Head Length measurements are taken from below the head 

Part 

Number 

Thread 

& Pitch 

Socket 

Size 

Flange 

Diameter 


TIHX4** M4 x 0.70mm 6mm 8mm 10mm, 15mm, 20mm, 25mm 

TIHX5** M5 x 0.80mm 7mm 10mm 10mm, 12mm, 15mm, 20mm, 

25mm, 30mm, 40mm, 45mm 


16mm, 18mm, 20mm, 22mm, 

25mm, 28mm, 30mm, 32mm, 

35mm, 40mm, 45mm, 50mm, 

55mm, 60mm, 65mm, 70mm, 

75mm, 80mm, 85mm, 90mm, 

95mm, 100mm, 105mm, 115mm 


30mm, 32mm, 35mm, 40mm, 

45mm, 47mm, 50mm, 55mm, 

60mm, 65mm, 70mm, 80mm, 

85mm 

TIHX10** M10 x 1.50mm 12/13mm 18mm 20mm, 25mm, 30mm, 35mm, 

40mm, 45mm, 50mm, 55m, 

60mm, 65mm , 70mm, 75mm 

TIHX10**F M10 x 1.25mm 12/13mm 18mm 15mm, 20mm, 25mm, 30mm, 

35mm, 40mm, 45mm, 50mm, 

55mm, 57mm, 60mm, 65mm, 

70mm, 75mm, 80mm, 85mm, 

90mm, 95mm, 100mm, 105mm, 

110mm, 112mm, 115mm, 125mm 

TIHX12**FF M12 x 1.25mm 14mm 20mm 50mm, 60mm, 70mm, 80mm, 

90mm 

24 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Countersunk Bolts 

Length measurements include the head 

Part 

Number 

Thread 

& Pitch 

Allen Key 

Drive 

Max Head 

Diameter 


TICS3** M3 X 0.60mm 2mm 5.8mm 10mm, 15mm, 

TICS4** M4 X 0.70mm 2.5mm 7.8mm 15mm, 20mm, 45mm, 50mm 

TICS5** M5 x 0.80mm 3mm 9.8mm 8mm, 10mm, 15mm, 20mm, 

25mm, 30mm, 

TICS6** M6 x 1.00mm 4mm 11.8.mm 15mm, 20mm, 25mm, 30mm, 

35mm, 40mm, 45mm 

TICS8** M8 x 1.25mm 5mm 15.6mm 20mm, 25mm, 30mm, 35mm, 

40mm, 45mm, 50mm, 55mm 

TICS10** M10 x 1.50mm 6mm 19.9mm 25mm, 30mm 

TICS10**F M10 x 1.25mm 6mm 19.9mm 20mm, 30mm 

Titanium 




Length measurements are taken from below the head 

Part 

Number 

Thread 

& Pitch 

Allen Key 

Drive 

Max Head 

Diameter 


TIFB412F M4 x 0.50mm 3mm 8mm 12mm 

TIFB4** M4 x 0.70mm 3mm 8mm 10mm, 12mm, 15mm 

TIFB5** M5 x 0.80mm 4mm 12mm 10mm, 16mm, 20mm, 25mm, 

30mm 

TIFB516XL M5 x 0.80mm 4mm 16mm 16mm 

TIFB6* M6 x 1.00mm 5mm 16mm 16mm, 20mm, 25mm, 30mm, 

35mm, 40mm, 55mm 

TIFB6**XS M6 x 1.00mm 5mm 12mm 20mm, 30mm 

TIFB8** M8 x 1.25mm 5mm 16mm 20mm, 25mm, 30mm, 35mm 

40mm, 85mm 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

25


NUTS 

Full Nuts 


TIFN4 M4 (0.70 pitch) Full Nut 7mm 





TIFN10F M10 (1.25 pitch) Full Nut 17mm 


TIFN12F M12 (1.50 pitch) Full Nut 18mm 

TIFN12FF M12 (1.25 pitch) Full Nut 18mm 

Flanged Nuts 


TIFLN5 M5 (0.80 pitch) Flanged Nut 8mm 




TIFLN10F M10 (1.25 pitch) Flanged Nut 14mm 

TIFLN10FF M10 (1.00 pitch) Flanged Nut 14mm 


TIFLN12F M12 (1.50 pitch) Flanged Nut 17mm 

TIFLN12FF M12 (1.25 pitch) Flanged Nut 17mm 

Note: Also refer to our axle nuts on page 54/55 where 

larger sizes are available. 

Nyloc Nuts 


TINYN4 M4 (0.70 pitch) Nyloc Nut 7mm 





TINYN10F M10 (1.25 pitch) Nyloc Nut 16mm 


TINYN12F M12 (1.50 pitch) Nyloc Nut 20mm 

TINYN12FF M12 (1.25 pitch) Nyloc Nut 20mm 

Flanged Nyloc Nuts 


TINYNFL5 M5 (0.80 pitch) Flanged Nyloc Nut 8mm 



TINYNFL8F M8 (1.00 pitch) Flanged Nyloc Nut 13mm 





TINYNFL12FF M12 (1.25 pitch) Flanged Nyloc Nut 18mm 

26 

26 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Titanium 

Bi-Hex Plastic Nyloc Nuts 




TINYNFLBH6 M6 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc 11mm 



TINYNFLBH10F M10 (1.25 pitch) Flanged Bi-Hex Plastic Nyloc 15mm 

TINYNFLBH10FF M10 (1.00 pitch) Flanged Bi-Hex Plastic Nyloc 15mm 

Metal Lock Nuts 


TILOCKNUT6 M6 (1.00 pitch) Flanged Metal Locknut 10mm 



TILOCKNUT10F M10 (1.25 pitch) Flanged Metal Locknut 14mm 

Bi-Hex Metal Lock Nuts 


TILOCKNUTBH6 M6 (1.00) Flanged Bi-Hex Metal Locknut 11mm 



TILOCKNUTBH10F M10 (1.25) Flanged Bi-Hex Metal Locknut 15mm 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

27


WASHERS 

Flat Washers 

Part Number Description Outside 

Diameter 

Thickness 

TIWA3 M3 Flat Washer 7mm 0.6mm 












Penny Washers 

Part Number Description Outside Thickness 

Diameter 

TIWA5-15 M5 Penny Washer 15mm 1.0mm 






Countersunk Washers 


Diameter 

TIWAC6-22 M6 Countersunk Washer 22mm 4.5mm 

Spring Washers 


Diameter 

TIWAS10 M10 Spring Washer 16mm 2.6mm 



TIWAS16 M16 spring washer 24mm 4.0mm 



Diameter 

TIWAD5 M5 Drilled Washer 10mm 1.0mm 






28 

28 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

RODS 

Titanium 

ALL AVAILABLE IN MACHINE FACTORY FINISH 

Rods 

We offer Titanium Rod in 240mm or 1m lengths. 

Note: We would advise that care be taken when machining 

Titanium as it is flammable and ideally requires cooling. 

Wear on tooling is also extensive. 

Part Number 

TIROD3.2-240 

TIROD4-240 

TIROD5-240 

TIROD6-240 

TIROD8-240 

TIROD10-240 

TIROD12.7-240 

TIROD16-240 

TIROD18-240 

TIROD20-240 

TIROD5-1000 

TIROD6-1000 

TIROD8-1000 

TIROD10-1000 

TIROD12-1000 

TIROD16-1000 

TIROD18-1000 

TIROD20-1000 

Diameter & Length 

Rod - M3.2 Diameter - approx 240mm Length 

Rod - M4 Diameter - approx 240mm Length 





Rod - M12.7 Diameter - approx 240mm Length 




Rod - M5 Diameter - 1 Metre Length 








Note: Sizes are approx as these are ‘ends’. 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

29

QUICK RELEASE FASTENERS 

QUICK RELEASE 

1/4 TURN FASTENERS 

Makes removal of bodywork easy and fast. Supplied 

individually or in packs and in all materials. Available 

materials, packs and lengths are listed below – choose 

from D-Ring, Scalloped Head or Allen Key Drive, all 

with a superb finish (17mm is the most popular, 

14mm is the most common for thinner race fairings). 

Aluminium 




D-Ring 

Part Number 

LQRCLIP14 

LQRCLIP17 

LQRCLIP19 

QRCLIP1014 

QRCLIP1017 

QRCLIP1019 

Description 

14mm Individual D-Ring Quick Release Fastener 



Packs of 10 - D-Ring 14mm Quick Release Fasteners 

& Washers 


& Washers 


& Washers 

Can also be purchased in packs complete with backing clips 

QRPACKRIVET** Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates 

and Rivets & Washers 

QRPACKSLIDE** Pack of 10 D-Ring Fasteners with Slide-on Backing Plates 

& Washers 

** Required length 

Alley Key Drive 

Part Number 

LQRCLIPAK14 

LQRCLIPAK17 

LQRCLIPAK19 

LQRCLIPAK21 

LQRCLIPAK24 

QRCLIPAK1014 

QRCLIPAK1017 

QRCLIPAK1019 

QRCLIPAK1021 

QRCLIPAK1024 

Description 

14mm Individual Allen Key Quick Release Fastener 





Packs of 10 - Allen Key 14mm Quick Release Fasteners 

with Washers 


with Washers 


with Washers 


with Washers 


with Washers 

Can also be purchased in packs complete with backing clips 

QRPACKAKRIVET** Pack of 10 D-Ring Fasteners with Rivet-on Backing Plates, 

Rivets and Washers 

QRPACKAKSLIDE** Pack of 10 D-Ring Fasteners with Slide-on Backing Plates 

and Washers 

** Required length 

Note: We also offer the slide-on & rivet-on backing 

clips individually, Please see page 74/75 

30 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

D-Ring 


LSSQRCLIP14 14mm Length D-ring Quick Release Fastener 



SSQRCLIP1017 17mm D-ring Quick Release Fastener - Pack of 10 

SSQRCLIP1417 17mm D-ring Quick Release Fastener - Pack of 14 

SSQRPACKRIVET1017 17mm D-ring Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers 

SSQRPACKRIVET1417 17mm D-ring Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers 

SSQRPACKSLIDE1017 17mm D-ring Quick Release Fastener - Pack of 10 with Slide on Backs & Washers 

SSQRPACKSLIDE1417 17mm D-ring Quick Release Fastener - Pack of 14 with Slide on Backs & Washers 



Alley Key Drive 

Part Number 

LSSQRCLIPAK14 

LSSQRCLIPAK17 

LSSQRCLIPAK19 

SSQRPACKAKRIVET1017 

SSQRPACKAKRIVET1417 

SSQRPACKAKSLIDE1017 

SSQRPACKAKSLIDE1417 

Description 

14mm Allen Key Drive Quick Release Fastener 



17mm Allen Key Quick Release Fastener - Pack of 10 with Rivet on Backs & Washers 

17mm Allen Key Quick Release Fastener - Pack of 14 with Rivet on Backs & Washers 

17mm Allen Key Quick Release Fastener - Pack of 10 with Slide on Backs & Washers 

17mm Allen Key Quick Release Fastener - Pack of 14 with Slide on Backs & Washers 

D-Ring 

Black Zinc Coated Steel Quick Release Fasteners. 

Strong and durable cost effective option, available 

in 17mm only – the most popular length. 

Part Number 

LDZUS-PANEX10 

QRSTEEL17SETBK 

QRSTEELSETSLIDE 

Description 

Individual Black Zinc Coated Steel D-Ring Quick Release Fastener 

Pack of 10 Black Steel 17mm Fasteners, Rivet on Backs and 

Rivets & Washers 

Pack of 10 Black Steel 17mm Fasteners, Slide on Backs and 

Rivets & Washers 

17mm is the perfect length and look for the 

MV Agusta F4 and the Ducati 748/916/996 range. 

D-Ring 

Part Number 

TIQRCLIP17 

TIQRCLIP19 

Allen Key Drive 

Part Number 

TIQRCLIP-AK17 

Description 

17mm Titanium Quick Release Stud - D Ring 

19mm Titanium Quick Release Stud - D Ring 

Description 

17mm Titanium Quick Release Stud Allen Key 

Drive 

Black Zinc Coated Steel 

AVAILABLE IN BLACK ZINC COATED 

Titanium 



QUICK RELEASE FASTENERS 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

31

WORKSHOP KITS 

WORKSHOP ASSORTMENTS 

We offer a variety of tubs and workshop kits in aluminium. 

Ideal for spares in the workshop or for that special project 

– just choose your preferred quantity, colour and bolt 

combination. 

25pc Workshop Kit 

Supplied with Copper Grease Lubricant, Allen Keys and Stickers 

• WSKIT25 

Assortment of 5mm, 6mm & 8mm Allen Bolts, Fairing 

Bolts, Nuts and Washers. 

100pc Workshop Tubs 

Supplied in a handy tub with Allen Keys and Copper Grease 

containing the following: 

Allen Key Socket Cap Bolt Tub 

• PBTUBALLEN 100 pc Metric Socket Cap Allen Key Bolt Tub - M5 - M8 

Dome Head/Fairing Bolt Tub 

• PBTUBFAIR 100 pc Metric Dome Head Allen Key Bolt Tub - M5 - M8 

Mixed Bolt Tub 

• PBTUBMIXED 100 pc Metric Assorted Dome Head & Socket Cap Allen 

Key Bolt Tub - M5 - M8 

Nut & Washer Tub 

• PBTUBNUTS 100 pc Metric Assorted Full Nuts, Nyloc Nuts, & Washers 

- M5 - M8 

Dome Nut Tub 

• PBTUBDOMENUT 

100 pc Metric Assorted Dome Nuts - M4 - M5 - M6 - M8 

- M10 - M10 Fine 

Drilled Washer Tub 

• PBTUBWAD 100 pc Drilled Washer Tub - M5 - M12 

Threaded Collar Tub 

• PBTUBCOLLAR 100 pc Threaded Collar Tub - M5 & M6 various outside 

diameters & lengths for use as spacers, shoulders and 

collars. Supplied only in natural finish. 

Please note: Colour options are not available. 

32 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

200pc Workshop Box 

Complete with Allen Keys, Copper Grease Lubricant, Anti-Scratch 

Washers and Pro-Bolt Stickers. Contains the following: 

• WSBOX200 (In our handy Workshop Box we supply) Allen Bolts, 

Dome Head Bolts, Nuts, Washers, Countersunk Bolts, 

Countersunk Washers and Cup Washers in the most 

popular sizes. 

Aluminium 




500pc Workshop Cabinet 

Ideal for large scale projects. Excellent value for 

money, presented in a convenient cabinet and 

comprises of the following: 

• BCAB500 Allen Bolts, Dome Head Bolts, 

Countersunk Bolts, Nuts and 

Washers in 5mm, 6mm and 8mm 

sizes in their most popular lengths. 

Also comes with Allen Keys, Copper 

Grease Lubricant, Anti-Scratch 

Washers and Pro-Bolt stickers. 

WORKSHOP KITS 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

33

WORKSHOP KITS 

We offer a variety of tubs and workshop kits in Stainless 

Steel. Ideal for spares in the workshop or for special 

projects. Exact contents are available on-line and can be 

amended if desired, with the agreement of Pro-Bolt. 



50pc Workshop Kit 

Supplied with Copper Grease Lubricant, Allen Keys and 

Stickers containing the following: 

• SSWSBOX50 Comprises: 

10 Nuts • 10 Washers 

10 Countersunk Bolts 

10 Flanged Hex Head Bolts 

10 Tapered Socket Caps Bolts 


Supplied with Allen Keys, Copper Grease Lubricant, Anti- 

Scratch Washers and Pro-Bolt Stickers containing the 

following: 

• SSWSBOX200 Comprises: 

25 Assorted Washers - M5 - M10 


30 Assorted Nuts - M5 - M10 

60 Flanged Hex Head Bolts - M5 - M10 

60 Tapered Socket Cap Bolts - M5 - M10 

100pc Workshop Tubs 

Supplied in a handy tub with Allen Keys and Copper 

Grease containing the following: 

Allen Key Socket Cap Bolts 

• SSTUBALLEN 100 pc Metric Tapered Socket Cap Allen Key 

Bolt Tub - M5 - M8 


• SSTUBFAIR 100 pc Metric Dome Head Allen Key Bolt 

Tub - M5 - M8 

Mixed Bolt Tubs 

• SSTUBMIXED 100 pc Metric Assorted Dome Head & Tapered 

Socket Cap Allen Key Bolt Tub - M5 - M8 

34 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

In our Titanium workshop boxes we provide a 

selection of our most popular parts. Exact contents 

are available on-line and can be amended if desired, 

with the agreement of Pro-Bolt. 

Titanium 




Supplied with Copper Grease Lubricant, Allen Keys 

and Stickers containing the following: 

• TIWSBOX50 Comprises: 

10 Nuts 

10 Washers 



10 Tapered Socket Caps Bolts 


Supplied with Allen Keys, Copper Grease Lubricant, Anti-Scratch 

Washers and Pro-Bolt Stickers containing the following: 


25 Assorted Washers - M5 - M10 


30 Assorted Nuts - M5 - M10 

60 Flanged Hex Head Bolts - M5 - M10 

60 Tapered Socket Cap Bolts - M5 - M10 


Supplied with Copper Grease Lubricant, Allen Keys 

and Stickers containing the following: 


15 Assorted Washers 


25 Assorted Nuts 


25 Tapered Socket Cap Bolts 

100pc Flanged Hex Head 

'Race-spec' Workshop Box 

Supplied with Copper Grease and Stickers, containing 

the following: 

• TIWSBOX100RS Race-Spec Flanged Hex Head Bolts 

M5 - M10 

WORKSHOP KITS 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

35


FULL MONTY BOLT KITS 

Aluminium 

All our Bolt Kits are available in one easy pack which 

includes: Side Engine Casing Kit, Fairing Bolt Kit, Screen Bolt 

Kit, Fuel Cap Kit, Mudguard/Hugger Kit and Number Plate 

Kit. You can ensure a colour consistent finish throughout. 

We also include a complementary selection of 20 bolts 

- assorted Dome Head and Socket Cap Bolts, which can be 

used as spares or used in other non stress areas (for example 

Heel Guards, Mudguards and Chain Guards). 






Choose from our coloured Aluminium 

or polished Stainless Steel Ranges. 

36 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

FULL MONTY ACCESSORY KITS 

Aluminium 

Our Accessory Kits are available in one easy pack. 

Products vary slightly, so please ask for exact 

contents or view specific model on-line. Achieve a 

colour consistent look throughout your bike – 

excellent gift idea! Also included is a complementary 

selection of 20 bolts – assorted Dome Head and 

Socket Cap Bolts which can be used as spares 

or in non stress areas (for example, Heel Guards, 

Mudguards and Chain Guards). 





mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

37


ENGINE CASING KITS 

Aluminium 

Our Engine Kits include all the necessary bolts to replace 

all side engine-casing bolts in your chosen colour. Also 

included are Copper Grease Lubricant and the necessary 

Allen Keys. Kits are easy to use – remove one bolt at a 

time, and replace with the identical length bolt from 

your Pro-Bolt kit. 

All Engine Kits are supplied using Allen Key Bolts. Where 

fitment will allow, we also offer Flanged Hex Head kits. 

Please note: Oil Filler Caps and Cam Cover Bolts are sold 

separately. 




Titanium 





38 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

CAM COVER BOLTS 

Aluminium 

An absolute must for any GSXR & Bandit. Replace dull 

and rusty Cam Cover bolts, our bolts are supplied in a 

smooth polished finish. Available individually or as a 

full set of 12 (8 top & 4 side). The finishing touch to any 

engine! 

Suzuki Bandit/GSXR 

Description 

Single Top Cylinder Head Bolt 

Set of 8 Cylinder Head Bolt 

Single Side Cam Bolt 

Set of 4 Side Cam Bolts 

Complete set of 8 Top & 4 Side 


Part Number 

SSSITEM1 

SSSITEM1-8 

SSSITEM3 

SSSITEM3-4 

SSSITEM13FULL 

Available individually or as a set of 8. 

Fits: Fazer 600, Fazer 1000, XJR1200 & XJR1300 

Yamaha Fazer XJR 

Description 

Individual 

Set of 8 






Aluminium Part 

Number 

LSPYAM10 

SPYAM10-8 


Aluminium 

SUMP BOLTS 

Our Sump Bolts are pre-drilled on all flats for ease of 

lockwiring. They are also fitted with a magnetic stud 

to assist with removing particles from the engine oil, 

which could potentially be damaging. See our model 

specific price list for detailed fitment information. 

Sump Bolts 

Part Number 

TISUMP1215MAG 

TISUMP1215FMAG 

TISUMP1412MAG 



Thread & Pitch 

M12 x 1.50mm x 15mm 

M12 x 1.25mm x 15mm 

M12 x 1.50mm x 12mm 

M12 x 1.25mm x 12mm 

M16 x 1.50mm x 12mm 

Note: As these items are fitted with a magnetic 

stud, we are not able to offer an anodised finish as 

this would interfere with the anodising process. 

Titanium 

AVAILABLE ONLY 

IN NATURAL 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

39


OIL FILLER CAPS 

Aluminium 

Machined to a smooth finish in your choice of 

colour – complete with 'O' ring. Each has a hole 

drilled in the top corner to allow the use of lock wire 

– complements our engine casing bolt kits to achieve 

the finished look. 13 fitments available to cover a 

wide range of models. 




Oil Filler Caps 

Part Number Description Thread & Pitch 

LOFCB10 BMW/F650 etc M24mm x 3.00mm 

LOFCB20 BMW/R1200GS etc M34mm x 1.50mm 

LOFCB30 BMW/S1000R M24mm x 2.00mm 

LOFCH10 Honda Standard - some Triumph M20mm x 2.50mm 

LOFCH20 Honda BlackBird/VFR Etc M22mm x 3.00mm 

LOFCY10 Yamaha Standard M27mm x 3.00mm 

LOFCY20 Yamaha XJR1300 M25mm x 1.00mm 

LOFCY30 Yamaha R1 (2004+) M27mm x 3.00mm 

LOFCK10 Kawasaki Standard M30mm x 1.50mm 

LOFCK20 Kawasaki ZX7R M38mm x 1.50mm 

LOFCK30 Kawasaki ZX9R (98) M20mm x 2.00mm 

LOFCS10 Suzuki & some Aprilia M20mm x 1.50mm 

LOFCD1O Ducati & some Aprilia M22mm x 1.50mm 

40 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

FAIRING BOLT KITS 

Aluminium 

Our Fairing Kits include all the necessary bolts and 

anti-scratch washers to replace bolts on the Top 

and Side Fairing, Seat Unit, Belly Pan, Mudguard 

& Hugger. Allen Keys, Pro-Lube & Stickers are also 

included in the kits. Replacement backing clips are 

not included as standard – our bolt kits will screw 

into the original backing clips. Where this is not 

possible, we do provide replacement nuts or clips 

for behind the fairing. 

Don't forget to order your matching Screen Kit! 




Note: Backing clips are available to order 

separately in our ancillary section on page 74/75 



Titanium 




mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

41


1/4 TURN QUICK RELEASE 

FAIRING KITS 

Our Quick Release Fairing Kits will provide D-Ring 

1/4 turn replacements where quick release are present 

as standard. All other bolts on the Side Fairing, Mudguard, 

Belly Pan and Seat Unit will be replaced with standard 

threaded bolts. This will provide a colour consistent finish 

throughout the fairing. 

All Materials 

ALUMINIUM: 



STAINLESS STEEL: 


TITANIUM: 


Note: Slide-On & Rivet-On backing plates are available on page 74/75 

Aluminium D-Ring Aluminium Stainless Steel Stainless Steel Titanium 

Model of Bike 

Allen Key Drive D-Ring 

Allen Key Drive D-Ring 

Aprilia 

RSV Mille (00-02) FOAP100QR FOAP100QRAK FOAP100QRSS FOAP100QRAKSS FOAP100QRTI 

RSVR (02-03) FOAP110QR FOAP110QRAK FOAP110QRSS FOAP110QRAKSS FOAP110QRTI 

RSVR Factory (05) FOAP120QR FOAP120QRAK FOAP120QRSS FOAP120QRAKSS FOAP120QRTI 

RSVR Factory (06+) FOAP130QR FOAP130QRSS FOAP130QRTI 

Ducati 

748/916/996 FDU032QR FDU032QRAK FDU032QRSS FDU032QRAKSS FDU032QRTI 

749R FDU110QR FDU110QRSS FDU110QRTI 

999R FDU150QR FDU115QRSS FDU115QRTI 

Honda 

VFR400/NC30 FHO040QR FHO040QRAK FHO040QRSS FHO040QRAKSS FHO040QRTI 

RVF400R/NC35 FHO042QR FHO042QRAK FHO042QRSS FHO042QRAKSS FHO042QRTI 

VFR750 (94/97) FHO135QR FHO135QRAK FHO135QRSS FHO135QRAKSS FHO135QRTI 

Triumph 

Daytona 955i FTR082QR FTR082QRAK FTR082QRSS FTR082QRAKSS FTR082QRTI 

T595/955i FTR120QR FTR120QRAK FTR120QRSS FTR120QRAKSS FTR120QRTI 

Yamaha 

R1 (98-99) FYA397QR FYA397QRAK FYA397QRSS FYA397QRAKSS FYA397QRTI 






MV Agusta 

F4 FMVA100QR FMVA100QRAK FMVA100QRSS FMVA100QRAKSS FMVA100QRTI 

42 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

SCREEN BOLT KITS 

Screen Kits include the specified amount of 5mm 

Screen Bolts, Nylon Washers and Rubber Nuts with Brass 

Insert. 4mm fine pitch Screen Kits are also available for 

Ducati, MV Agusta, Cagiva and Aprilia Factory RSVR. 

Finish the look with our model specific Fairing Bolt Kits. 

All Materials 

ALUMINIUM: 







Description 

Aluminium Part 

Number 

Stainless Steel Part 

Number 

Titanium Part 

Number 

4 Bolt Standard Kit SK4 SK4SS TISK4 







7 Bolt 4mm Diameter Fine Pitch Special Kit SKDUC7 SKDUC7SS TISKDUC7 




mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

43


FUEL CAP BOLT KIT 

Aluminium 

These are the bolts that fit into the fuel cap 

surround - they are available for all bikes 

including the specially engineered Honda 

bolts. Kits are very easy to fit - remove one 

bolt at a time and replace with the identical 

length Pro-Bolt. 






44 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

BAR ENDS 

Aluminium 

Replace lost or damaged Steel Bar Ends and put some 

colour where you can see it! Smooth finish and comes 

complete with necessary fittings. 




Description 

Pair of Bar Ends for Hollow Bars 

Pair of Yamaha Bar Ends - R1 etc 

Pair of Yamaha Bar Ends - R6 etc 

Pair of Kawasaki Bar Ends - ZX6 / ZX9 

Pair of Kawasaki Bar Ends - ZX7 / ZX12 

Pair of Kawasaki Bar Ends - GPZ / Z1000 / ZZR 

Pair of Kawasaki Bar Ends - ZX10R (2006) 

Pair of Honda Bar Ends - CBR600 / CBR900 etc 

Pair of Honda Bar Ends - SP1/SP2 

Pair of Honda Bar Ends - Hornet '07 

Pair of Aprilia Bar Ends - RSV Mille etc 

Pair of Aprilia Bar Ends - RS125 / Pegaso 

Pair of Aprilia Bar Ends - RSV/Factory/Tuono 

Pair of Suzuki Bar Ends - GSXR600 K1/K2 

Pair of Suzuki Bar Ends - SV650/GSXR750/SRAD/GSXR1100 - etc 

Pair of Suzuki Bar Ends - SV650 / SV1000 / TL1000 etc 

Pair of Suzuki Bar Ends - GSXR1300 etc 

Pair of Suzuki Bar Ends - GSXR600 etc 

Pair of Suzuki Bar Ends - GSXR1000 K6/Other 

Pair of BMW bar Ends - F650/F800GS 

Pair of BMW Bar Ends - S1000RR 

Aluminium 

Part Number 

BARENDUN10 

BARENDYA10 

BARENDYA20 

BARENDKA10 

BARENDKA20 

BARENDKA30 

BARENDKA40 

BARENDHO10 

BARENDHO20 

BARENDHO30 

BARENDAP10 

BARENDAP20 

BARENDAP30 

BARENDSU10 

BARENDSU20 

BARENDSU30 

BARENDSU40 

BARENDSU50 

BARENDSU60 

BARENDBM10 

BARENDBM20 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

45


TOP YOKE NUTS 

Aluminium 

Replace damaged or rusty Centre Stem Nuts 

with something rather more colourful. See 

our price list for fitment details. 

Top yoke nuts 

Description 

Thread 

& Pitch 

Socket 

Size 

Aluminium 

Part Number 

Titanium 

Part Number 

Domed with Breather Hole 24mm x 1.00 30mm LTYOKE10 TIYOKE10 

Domed 25mm x 1.00 36mm LTYOKE20 TIYOKE20 




Domed with Breather Hole 22mm x 1.00 30mm LTYOKE50D TIYOKE50D 

Triumph Top Yoke Nut 22mm x 1.25 N/A LTYOKE100 N/A 




Titanium 



46 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

PRE-LOAD ADJUSTERS 

Aluminium 

They look fantastic and are also functional. Allows 

easy adjustment of fork spring compression, to 

adapt to pillion passengers and different road types. 

Supplied with steel grub screws to hold in place and 

an allen key to fit. Sizes available to fit most models. 

Please Note: These may not be compatible if a 

steering damper is fitted. 




HEXAGON FITMENT 

Description 

Pre-Load 14mm 

Pre-Load 14mm - Thinner Fork Tops 

Pre-Load 17mm 

Pre-Load 19mm 

Pre-Load 22mm 

FLAT/ROUNDED FITMENT 

Description 

Pre-Load 18/14mm 

Pre-Load 20/17mm 

Aluminium 

Part Number 

PLOAD14 

PLOAD14-T 

PLOAD17 

PLOAD19 

PLOAD22 

Aluminium 

Part Number 

PLOAD1814 

PLOAD2017 

Example: PLOAD14 - 14mm 

14mm 

Example: PLOAD1814 - 18/14mm 

18mm 

14mm 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

47


CABLE ADJUSTERS 

Aluminium 

Exact replicas of the originals – easy to replace 

and colour where you can see it! 

Used on many models of Honda, Kawasaki, 

Suzuki & Yamaha. 




Aluminium 

Description 

Part Number 

2 piece M8 thread LCA10 

1 piece M10 thread LCA20 

DIAL ADJUSTERS 

Aluminium 

Description 

Part Number 

1-4 position Dial Adjuster - many Suzuki LDA10 

1-5 position Dial Adjuster - some Kawasaki LDA30 

'Spin' type Dial Adjuster - many Honda & Kawasaki LDA20 

48 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

RESERVOIR CAPS 

Aluminium 

Superb smooth finish in a colour of your choice 

– literally in your face! Get rid of ugly plastic stock 

originals. We offer a wide range of Reservoir Caps 

to fit front brake, clutch and rear brake cylinders 

on a wide range of models. Comes complete 

with Countersunk Bolts where necessary. 

Measurements are the outside diameter. 




Aluminium 

Description 

Part Number 

Threaded Round Cap - 61mm o/d 

RESR10 

2 Screws Round Cap - 56mm o/d RESR20 

2 Screws Round Cap - 56mm o/d - with 15mm bolts RESR20 

2 Screws Round Cap - 56mm o/d - with 45mm bolts RESR20-CS445 


RESR30 


RESR50 

2 Screws 2 x 45 Round Cap - 53mm o/d Brembo RESR60 

Threaded Round Cap - 39mm o/d Brembo 

RESR70 


RESR80 


RESR90 

Oblong 43 x 75mm 

RESO10 


RESO20 

Oblong 37 x 55mm - with 42mm Bolts 

RESO20-20 


RESO30 


RESO40 


RESO50 

RESERVOIR CLIPS 

To complement our top selling Reservoir Cap, 

this clip works with our Reservoir Cap part 

number ‘RESR10’. This will replace your original 

mild steel clip – choose a complementing 

or contrasting colour to your Reservoir Cap. 

Supplied with matching bolt. 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

49


GEAR SHIFT RODS 

Aluminium 

Nice touch to customise your machine and easy to fit. When 

fitting, allow that one end will be a reverse thread. 

Male 6mm rods are supplied with standard and left hand thread 

nuts to complete the look. 

For reference purposes and for customised projects, we list below 

total length and specify whether fitment is male or female. 




Description 

Gear Shift Rod Female - 6mm Thread/6mm Thread - 145mm Overall Length 














Gear Shift Rod Male - 6mm Thread/6mm Thread - 140mm Overall Length 









Aluminium 

Part Number 

GRODF66145 

GRODF66150 

GRODF66154 

GRODF66162 

GRODF66170 

GRODF66176 

GRODF66180 

GRODF66184 

GRODF66210 

GRODF66255 

GRODF66272 

GRODF66284 

GRODF68214 

GRODF68240 

GRODM66140 

GRODM66149 

GRODM66163 

GRODM66188 

GRODM66190 

GRODM66195 

GRODM66197 

GRODM66220 

GRODM66224 

PADDOCK STAND BOBBINS 

Essential for all bikers! Screws straight into 

the swingarm, showing no ugly steel bolts. 

Available in M6, M8 & M10 . 

Description 

Pair of M6 Paddock Stand Bobbins 



Aluminium 

Part Number 

BOB6 

BOB8 

BOB10 

50 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

CHAIN ADJUSTER BLOCKS 

Aluminium 

Smarten up your rear end! Replace rusty stock originals 

with these shiny new blocks – supplied in pairs. 




Description 

Aprilia RSV (98-03) Falco, Tuono Pair of Blocks 

Aprilia RSV/R (2004+) Pair of Blocks 

Honda CBR900RR (00-03) Pair of Blocks 

Honda SP1/SP2 Pair of Blocks 

Honda CB1300 Pair of Blocks 

Honda CBR1000 ‘08+ Pair of Blocks 

Kawasaki ZXR400/ZX7/ZX9 Pair of Blocks 

Kawasaki KLX250/Versys 650 Pair of Blocks 

Kawasaki ZX6/ZX7/ZX9/ZX12 Pair of Blocks 

Kawasaki ZX10R (2004-2005) Pair of Blocks 

Kawasaki ZX10R ‘06+ Pair of Blocks 

Kawasaki ZX10R ‘08 Pair of Blocks 

Suzuki GSXR600/750/1000/TL1000/GSXR1300 Pair of Blocks 

Suzuki B-King Pair of Blocks 

Suzuki 1200 Bandit Pair of Blocks 

Yamaha R6 (98-02) / R1(98-03) Pair of Blocks 

Yamaha R6 (03+) / R1 Pair of Blocks 

Yamaha R1 (04+) / R1 Pair of Blocks 

Yamaha XJR1200/1300 Pair of Blocks 

Yamaha XJR1300SP Pair of Blocks 

Aluminium 

Part Number 

CABPRA10 

CABPRA20 

CABPRH10 

CABPRH20 

CABPRH30 

CABPRH50 

CABPRLEFTK10 

CABPRLEFTK20 

CABPRK10 

CABPRK20 

CABPRK40 

CABPRK50 

CABPRS10 

CABPRLEFTS10 

CABPRS20 

CABPRY10 

CABPRY20 

CABPRY40 

CABPRY50 

CABPRY60 

CHAIN ADJUSTER BOLTS & NUTS 

For use with the Chain Adjuster Blocks above. 

Smartens up the swingarm and very easy to fit. 

Available individually or in sets: 

Description 

Titanium 

Part Number 

Length 

of bolt 

Individual M8 x 45mm Chain Adjuster Bolt TIAXLEADJ845 45mm 




Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts TIAXLE845SET 45mm 




ALL AVAILABLE IN 

POLISHED STAINLESS 

Stainless 

Description 

Steel Part 

Number 

Length 

of bolt 

Individual M8 x 45mm Chain Adjuster Bolt LSSAXLEADJ845 45mm 

Individual M8 x 55mm Chain Adjuster Bolt LSSAXLEADJ855 55mm 

Chain Adjuster Bolt & Nut Set - Pair of M8 x 45mm Bolts & Nuts SSAXLE845SET 45mm 

Chain Adjuster Bolt & Nut Set - Pair of M8 x 55mm Bolts & Nuts SSAXLE855SET 55mm 

Titanium 




mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

51


SPROCKET NUTS 

Aluminium 

Put some colour in your nuts! Manufactured using aerospace 

grade alloy with rolled threads for extra strength. 

Note: Refer to the Pro-Bolt fitting and torque instructions 

provided. These products are specifically designed and 

manufactured in Aluminium and therefore we specify a 

torque setting of 33lbsft/44Nm which is significantly lower 

than manufacturer’s steel originals. 




Description 

Set of 6 10mm x 1.25mm pitch - most models 

Set of 6 12mm x 1.25mm pitch - some Honda 

and large CC Suzuki 

Aluminium 

Part Number 

SPN10 

SPN12 

52 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

SPROCKET NUTS 

Titanium 

Both Stainless Steel and Titanium Sprocket 

Nuts should be torqued to your manufacturer’s 

recommended setting. 




Description 


Part Number 

Titanium 

Part Number 


M8 x 1.25mm Sprocket Nut 

- Individual 

LSSSPN8 

TISPN8 


- Set of 6 

SS6SPN8 

TI6SPN8 


- Individual 

(used on Ducati 1098) 

LSSSPN10F 

TISPN10F 


- Set of 6 

(used on Ducati 1098) 

SS6SPN10F 

TI6SPN10F 


- Individual 

LSSSPN10 

TISPN10 


- Individual 

LSSSPN10C 

TISPN10C 


- Set of 5 

SS5SPN10 

TI5SPN10 


- Set of 6 

SS6SPN10 

TI6SPN10 


- Set of 6 (used on some 

models of Aprilia) 

SS6PN10C 

TI6SPN10C 


- Individual 

LSSSPN12 

TISPN12 


- Set of 5 

SS5SPN12 

TI5SPN12 

SPROCKET NUTS BI-HEX 

Italian inspired design. Titanium 12 point 

Bi-Hex Sprocket Nuts. Available individually or 

in sets of 5 and 6. 

Description 

Set of 5 - 10mm x 1.25 pitch Nut 

Set of 6 - 10mm x 1.25 pitch Nut 

Titanium 

Part Number 

TI5SPN10BH 

TI6SPN10BH 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

53


AXLE NUTS & SWING ARM NUTS 

Titanium 

Replace rusty originals with these light, bright and 

sexy alternatives. In most cases, our Axle Nuts are 

manufactured with a captive washer. For fitment 

intended to a specific model of bike, please refer 

to our model specific price list or website page. 

The following table is provided as a list of Threads, 

Thread Pitches, Socket Sizes and Heights. 





Description Thread Pitch Height 

Flange 

Diameter 

Socket 

Size 

Titanium 

Part Number 

Axle Nut Flanged AF22 16mm 1.50mm 16mm 32mm 22mm TINUT16150001 

Stainless 

Part Number 

Axle Nut Flanged AF27 18mm 1.50mm 14mm 31mm 27mm TINUT18150001 LSSNUT18150001 


Axle Nut Flanged Castellated AF27mm 18mm 1.50mm 17.8mm 31mm 27mm TINUT18150003 LSSNUT18150003 

Axle Nut Flanged Castellated AF24 18mm 1.50mm 17.8mm 31mm 24mm TINUT18150005 

Axle Nut Flanged AF26 20mm 1.50mm 11.2mm 30mm 26mm TINUT20150001 

Axle Nut Flanged AF27 20mm 1.50mm 15.2mm 35mm 27mm TINUT20150002 

Axle Nut Flanged AF27mm 20mm 1.50mm 15.8mm 32mm 27mm TINUT20150003 


Axle Nut Flanged Castellated AF32mm 24mm 1.50mm 24mm 38mm 32mm TINUT24150001 LSSNUT24150001 


Axle Nut Flanged AF28 M25 (748/916/996) 25mm 1.25mm 33.3mm 33mm 28mm TINUT25125001 

Axle Nut Flanged AF30 (Ducati Monster 1000 Sie) 25mm 1.25mm 10mm 37mm 30mm TINUT25125002 


Axle Nut Flanged Plastic Nyloc AF32 25mm 1.50mm 13mm 37.7mm 32mm TINUT25150002 


Axle Nut Flanged Castellated AF32 25mm 1.50mm 21mm 38mm 32mm TINUT25150004 


Yamaha Swingarm Captive Nut (R1 ‘07-’08 Right Side) 32mm 1.00mm 11mm 45mm 34mm TINUT32100001 

Axle Nut Flanged AF41 (Ducati 748/916/996) 33mm 1.25mm 14.5mm 49mm 41mm TINUT33125002 

Axle Nut Flanged Castellated AF46 (748/916/996) 38mm 1.25mm 28mm 63mm 46mm TINUT38125001 

Axle Nut Flanged Bi-hex with Cone (Ducati 1098 AF61) 48mm 1.50mm 35mm 74mm 61mm TINUT48150001 

Axle Nut Flanged Bi-hex AF61 (MV Agusta) 48mm 1.50mm 35mm 75mm 61mm TINUT48150002 

Axle Nut Flanged Bi-Hex Castellated (MV Sprocket Side) 48mm 1.50mm 17.5mm 65mm 61mm TINUT48150003 

54 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

AXLE BOLTS & SLEEVES 

Titanium 

Axle Bolts bear the brunt of the elements 

and salt water, therefore they corrode 

quickly. Replace them with Stainless Steel 

or our Titanium version. 





Multi Fit SPECIALS 

Description 

Front Wheel Axle Bolt – M14 x 1.50mm – 22mm Socket Size 

Fits many Honda Models 

Front Wheel Axle Bolt – M18 x 1.50mm – 22mm Socket Size 

Fits Many Honda Models 


Part Number 

LSSSPH001 

N/A 

Titanium 

Part Number 

TISPHO01 

TISPHO03 

Kawasaki SPECIALS 

Description 

Front Wheel Axle Sleeve 

Fits Kawasaki ZXR636/ZX10R ‘06+ 


Part Number 

N/A 

Titanium 

Part Number 

TISPKAW11 

Triumph SPECIALS 

Description 

Front Wheel Axle Bolt / Swingarm Bolt 

Fits Triumph Daytona/Speed Triple 


Part Number 

N/A 

Titanium 

Part Number 

TISPTRI01 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

55


DISC ROTOR BOLTS 

Note: Below are common bolts used 

by aftermarket wheel manufacturers. 

However, fitment may vary, so please 

use these profiles to compare with 

your originals and verify. 

BMW 

Titanium - TIDISCBMW 

Stainless Steel - LSSDISCBMW 

BMW 

Titanium - TIDISCBMW001 

Stainless Steel - LSSDISCBMW001 

Aftermarket PVM 

Titanium - TIDISCPVM 

Stainless Steel - N/A 

M8 

25 

M8 

28 

M8 

15 

BMW 

Titanium - TIDISCBMW002 

Stainless Steel - LSSDISCBMW002 

Aprilia/Ducati Allen Key 

Titanium - TIDISCDUC10 

Stainless Steel - LSSDISCDUC10 

Aftermarket Braking 

Titanium - TIDISCBRAKE10 


M6 

M8 

M8 

20 

Ducati 



Ducati 



Aftermarket Braking 

Titanium - TIDISCBRAKE20 


M8 

M8 

20 

M8 

Ducati 



Ducati 



Aftermarket 

Galespeed Front 

Titanium - TIDISCGALE10 


M8 

20 

M8 

13 

M6 

Honda Front 

Titanium - TIDISCHONFR 

Stainless Steel - LSSDISCHONFR 

Honda Rear 

Titanium - TIDISCHONRE 

Stainless Steel - LSSDISCHONRE 

Aftermarket 

Galespeed Rear 

Titanium - TIDISCGALE20 


M6 

M8 

24 

M6 

56 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Titanium 





Many of these bolts are 

suitable replacements 

for Footrest Hanger Bolts 

and Subframe Bolts. 

Kawasaki 

Titanium - TIDISCKAW 

Stainless Steel - LSSDISCKAW 

Kawasaki 

Titanium - TIDISCKAW20 


Kawasaki 

Titanium - TIDISCKAW30 


M8 

M8 

M8 

Suzuki 

Titanium - TIDISCSUZ 

Stainless Steel - LSSDISCSUZ 

Suzuki 

Titanium - TIDISCGSXR 

Stainless Steel - LSSDISCGSXR 

Suzuki 

Titanium - TIDISCSUZ10 

Stainless Steel - LSSDISCSUZ10 

M8 

M8 

M6 

20 

Suzuki 

Titanium - TIDISCSUZ20 

Stainless Steel - LSSDISCSUZ20 

Yamaha 

M8 

M8 

22 

Titanium - TIDISCYAM 

Stainless Steel - LSSDISCYAM 

Triumph 

Titanium - TIDISCTRIFR 

Stainless Steel - LSSDISCTRIFR 

Yamaha 

M8 

Titanium - TIDISCR1R6 

Stainless Steel - LSSDISCR1R6 

M6 

Triumph 

Titanium - TIDISCTRIRE 

Stainless Steel - LSSDISCTRIRE 

Yamaha 

M8 

Titanium - TIDISCYAM20 

Stainless Steel - LSSDISCYAM20 

M8 


20 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

57


CALIPER PARTS 

Titanium 

Bleed Nipples 

For those who value real attention to detail! 

M7, M8 and M10 and special M8 for Ducati. 

Description 


Part Number 

Titanium 

Part Number 

M7 x 1.00mm LSSBN7 TIBN7 

M7 x 1.00mm (Shallow) LSSBN7KAW TIBN7KAW 


M8 Special Ducati x 1.25mm N/A TIBN8-DUCATI 




Grub Screws 

Pad Pin Grub Screw. Manufactured with 

a 5mm allen key drive. 

Titanium 

Part Number 

TIPINGRUB 




Part Number 

LSSPINGRUB 

Manufacturer Front Rear Clutch 

Honda M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm 

Kawasaki M7 x 1.00mm M7 x 1.00mm M8 x 1.25mm 

Suzuki M7 x 1.00mm M7 x 1.00mm M8 x 1.25mm 

Yamaha M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm 

Ducati M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm 

Triumph - Late M8 x 1.25mm M8 x 1.25mm M8 x 1.25mm 

BMW Pre 1996 M10 x 1.00mm M10 x 1.00mm 

BMW 1996+ 

M10 x 1.00mm 

BMW K Models M10 x 1.00mm M10 x 1.00mm 

58 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Banjo Bolts 

Available in Hex Head, double and single 

sizes. Allen Key Drive versions are also 

available in single 1.25mm pitch. Supplied 

with Copper Washers. 

Description 


Part Number 

Titanium 

Part Number 

Single Banjo M10 x 1.25mm LSSBANJOS10 TIBANJOS10 

Single Banjo M10 x 1.00mm LSSBANJOS10F TIBANJOS10F 

Single Banjo M10 x 1.00mm LSSBANJOS10FBN TIBANJOS10FBN 

with Bleed Nipple 

Yamaha Single Banjo 

LSSBANJOS20 TIBANJOS20 

M10 x 1.25mm Allen Key Drive 

Double Banjo M10 x 1.25mm LSSBANJOD10 TIBANJOD10 

Double Banjo M10 x 1.00mm LSSBANJOD10F TIBANJOD10F 

Titanium 






mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

59


CALIPER PAD RETAINING PINS 

Internal fitment of Pad Pins are replicas of originals. 

Our most popular Pins are supplied with an external 

Hex Head, which has been drilled to allow for lockwire. 

Nissin 

Titanium - TIPINBP001 


Nissin 

Titanium - TIPINBP002R 

Stainless - SSPINBP002R 

Nissin 


Stainless Steel - LSSPINBP003R 

Tokico 


Stainless Steel - SSPINBP004R 

Nissin 


Stainless Steel - SSPINBP005R 

Nissin 



Tokico 



60 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Titanium 




AVAILABLE IN POLISHED STAINLESS 

Sumitomo 



Nissin 



Tokico 



Tokico 


Stainless LSSPINBP011R 

Brembo 



Suzuki Own Make 



Suzuki Own Make 



Kawasaki 




mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

61


CALIPER UPGRADES 

Titanium 

Caliper Refurbishment Kits 



Look after the most important part of your bike! These kits are 

an excellent overhaul for your bike’s calipers – it makes sense 

to change all caliper components when taking the time to 

bleed the system. 

Kit contains: Banjo Bolts, Bleed Nipples, Caliper Pins. 

Part Number Caliper Fits model of bike 

TIKITD1000 Brembo Factory, RSV, Tuono 

TIKITD1001 Brembo 748, 848, 916, 996, 998 

TIKITD1003 Brembo Brembo Aftermarket Racing, Mono Bloc, Radial Mount Calipers, 

108 Centre to Centre Mounting Holes 

TIKITD2000 Tokico CBR600RR ‘05-’10, CBR1000RR 06-’10 

TIKITD2001 Tokico GSXR600 K4-K10, GSXR750 ‘04-’10, GSXR1000 ‘03-’08, 

636 B1/B2 03-’04, ZX10R C1/C2 ‘04-05, 636 C1/C2 05-’06 

TIKITD2002 Tokico ZX10R ‘08-'10 

TIKITD2003 Tokico ZX6R ‘00-’02, ZX12R A1-A2 ‘00-’01 

TIKITD2004 Tokico ZX10R ‘06-’07 

TIKITD2005 Tokico ZX12 B1/B2 ‘02-’0 

TIKITD2006 Tokico GSXR600 K1-K3, GSXR750 Y - K3, GSXR750 K6/K7 

TIKITD2007 Tokico SV1000/S ‘03-’04, SV1000/S ‘05+, GSXR1000 K1/K2 

TIKITD3000 Sumitomo R6 99+, R1 ‘98+ 

TIKITD4000 Nissin CBF600F ‘99-’05, CBR900RR ‘98-’03, SP1/SP2, 

CBR1100XX Blackbird 

TIKITD4001 Nissin CBR900R ‘92-’97, CB900 Hornet ‘01-’05 

TIKITD4002 Nissin VTR1000 Firestorm ‘97-’01 

TIKITD5000 AP AP Racing, Mono Bloc, Radial Mount Calipers, 

108 Centre to Centre Mounting Holes 

TIKITD6000 Suzuki GSF600 Bandit ‘00-’04, SV650 ‘03-’04, SV650S ‘03-’04 

Race-Spec Radial Caliper Mount Bolt Kits 

For standard or upgraded radial calipers – we've now made 

it easier to order! All our Radial Caliper Kits are metric 

10mm x 1.25mm fine pitch with pre-drilled heads for ease of 

lock-wiring. Kits are available to order by length of required 

bolt – measurements are taken from below the head. 

Part Number 

Set of 4 Bolts - Length of Bolt 

measured from under the head 

Kit Weight 

TIFBRADIALRS55 Set of 4 Race Spec M10 x 55mm x 1.25mm 79gms 






62 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

UNSPRUNG OVERHAUL BOLT KITS 

Titanium 

A selection of our most popular un-sprung bolts are 

presented here in boxes. Bolts included are either Flanged 

Hex Head or Tapered Socket Cap - the bolt heads replicate 

the bike’s originals. Kits are available in Stainless Steel and 

Titanium. Titanium Race Spec is also available for many 

models. In our Race Spec Kits, we upgrade any Flanged Hex 

Head Bolts in the Front Axle Pinch and Caliper Mount Bolts 

to our Pre-drilled Race Spec Style. 

Included are: 

• Front & Rear Disc Bolts 

• Sprocket Nuts 

• Front Axle Pinch Bolts 

• Front Caliper Mount Bolts 

• Front Caliper Pinch Bolts (where applicable) 





Stainless Steel Titanium RaceSpec Fits 

SSKITCAP120 TIKITCAP120 TIKITCAP120R Aprilia Factory 04-‘05 

SSKITCAP130 TIKITCAP130 Aprilia RSVR Factory ’06-‘08 

SSKITCAP150 TIKITCAP150 Aprilia RSV4 Factory ‘09 

SSKITCBMW047 TIKITCBMW047 BMW S1000RR ‘10+ 

SSKITCDU032 TIKITCDUC32 TIKITCDU032R Ducati 748/916/996/998 (‘99+ Models) 

SSKITCDU032-1 TIKITCDUC32-1 TIKITCDU032R-1 Ducati 748/916/996/998 (Pre 99 Models) 

SSKITCDU150 TIKITCDUC150 TIKITCDU150R Ducati 999 

SSKITCDU045 TIKITCDU045 Ducati 848 

SSKITCDU250 TIKITCDU250 TIKITCDU250R Ducati 1098 / 1198 

SSKITCHO098 TIKITCHO098 TIKITCHO098R Honda CBR600RR ’05-‘06 

SSKITCHO099 TIKITCHO099 TIKITCHO099R Honda CBR600RR ‘07-‘10 



SSKITCHO214 TIKITCHO214 TIKITCHO214R Honda CBR1000RR ’08-‘10 

SSKITCHO207 TIKITCHO207 TIKITCHO207R Honda CB1000R ’08+ 

SSKITCHO217 TIKITCHO217 TIKITCHO217R Honda VTR1000 SP1 / SP2 

SSKITCKA196 TIKITCKA196 TIKITCKA196R Kawasaki 636 ‘05-‘06 

SSKITCKA190 TIKITCKA190 TIKITCKA190R Kawasaki ZX6R ’07-‘08 

SSKITCKA175 TIKITCKA175 Kawasaki ZX6 Ninja ’09-‘10 

SSKITCKA286 TIKITCKA286 TIKITCKA286R Kawasaki ZX10 ‘06-‘07 

SSKITCKA287 TIKITCKA287 TIKITCKA287R Kawasaki ZX10 ’08-‘10 

SSKITCSU077 TIKITCSU077 TIKITCSU077R Suzuki GSR600 2006 

SSKITCSU095 TIKITCSU095 TIKITCSU095R Suzuki GSXR600 K1-K3 



SSKITCSU148 TIKITCSU148 TIKITCSU148R Suzuki GSXR750 Y-K3 









SSKITCSU200 TIKITCSU200 TIKITCSU200R Suzuki GSXR1300 Hayabusa ’99-‘07 

SSKITCSU205 TIKITCSU205 TIKITCSU205R Suzuki GSXR1300 Hayabusa ’08-‘10 

SSKITCSU210 TIKITCSU210 TIKITCSU210R Suzuki GSX1300 B-King ‘07+ 

SSKITCSU250 TIKITCSU250 Suzuki GSX1400 ’01-‘07 

SSKITCTR088 TIKITCTR088 TIKITCTR088R Triumph Daytona 675 ’06-‘08 

SSKITCYA282 TIKITCYA282 TIKITCYA282R Yamaha R6 ’03-‘04 

SSKITCYA282-1 TIKITCYA282-1 TIKITCYA282-1R Yamaha R6 ‘05 





SSKITCYA406 TIKITCYA406 TIKITCYA406R Yamaha R1 Big Bang ’09-‘10 

SSKITCYA192 TIKITCYA192 TIKITCYA192R Yamaha FZS1000 Fazer ’01-‘05 

SSKITCYA193 TIKITCYA193 Yamaha FZS1000 Fazer ’06-‘10 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

63


POPULAR KITS 

Front & Rear Caliper Mount Kit 

Supplied in kit form with Copper Grease, these replace 

the bolts that mount the caliper to the fork legs. 

We use either Flanged Hex Head or Tapered Socket Cap 

Bolts as appropriate when replacing the originals. 

Where fitment allows, we also offer a 'Race-Spec' 

version, where the heads are drilled for ease of 

lockwiring. 

Front & Rear Caliper Pinch Bolt Kit 

These are the bolts that go through the caliper itself, 

pinching the caliper together. We also 

offer the special 'low head profile' 

Brembo Caliper Pinch Bolts in 

both Titanium and 

Stainless Steel. 

64 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Fork/Axle Bottom Pinch Bolts 

Supplied in kit form with Copper Grease – these 

replace the bolts at the bottom of the forks. 

Upgrade further to our amazingly low weight 

Race-Spec bolts. Pre-drilled across the flats, 

reduced socket size and scooped-out head for 

maximum weight saving with no compromise in 

strength and safety. These bolts are widely used by 

top race teams. The most common size bolt – M8 x 

40mm – weighs just 9.5gms in Titanium, compared 

to 18.5gms of the average steel original. 

Titanium 





Our most popular kit, four M8 x 40mm Race-Spec 

bolts, weigh in at just 40gms. 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

65


Brake & Clutch Perch Pinch Bolt Kits 

The bolts that pinch together the Brake and 

Clutch Perches on the handlebars. 

NEW 

RACE-SPEC 

ALUMINIUM 

Handle Bar Bolt Kits 

These bolts pinch the handlebar to the yoke or 

forks for both retro and clip-on style. 

66 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Top & Bottom Triple Clamp Bolt Kits 

Supplied in kit form with Copper Grease – these 

are the fork-to-yoke clamp bolts. 

Titanium 





Rider & Pillion Footrest Hanger Bolt Kits 

The bolts that mount the footrest hangers. 

We offer sets for both front & rear. 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

67


Scratch & Spark Set 

For those who like to get down, you’ll get some serious 

sparks from these! Titanium bolts, with your colour choice 

of alloy collar. We offer 6mm & 8mm Bolts in 20mm 

lengths. Other lengths can be supplied on request. 

Part Number 

TISPARK6 

TISPARK8 

Description 

Pair of 6mm Allen Key Drive Bolts with colour anodised collar 

Pair of 8mm Allen Key Drive Bolts With colour anodised collar 

Subframe Bolt Kit 

These are the bolts that hold the main sub-frame on. 

Where necessary supplied with Washers and Nyloc Nuts. 

68 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

SPECIAL PARTS 

Titanium 

Also see our Axle Nuts, Disc Bolts & Caliper Pins. 



Aprilia 

Part Number 

A TISPAP12 

B TISPAP14 

Description 

Titanium RSVR 2002-2003 Front Caliper Mount Bolt 

- M10 x 1.25 x 28mm 

Titanium RSVR/Other Rear Brake Pivot Bolt 



BMW 

The following parts are available in polished Stainless Steel 

Part Number 

A LSSSPBMW03 

A SSSPBMW03-4 

B SSSPBMW04-8 

C SSSPBMW06-4 

D LSSSPBMW05 

D SSSPBMW05-5 

Description 

Individual Frame Adjusting Nut – F800 series, 800S, 800ST 

Set of 4 Frame Adjusting Nuts – F800 series, 800S, 800ST 

Set of 8 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines 

Set of 4 Cylinder Head Rocker Head Cover Bolts & Washers – Boxer Engines 

Wheel Bolt for Cast Wheels – M10 x 1.25mm x 40mm 

Set of 5 Wheel Bolts for Cast Wheels – M10 x 1.25mm x 40mm 

B 

A 

A 

B 

C 

D 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

69


Ducati 

All Materials 

ALUMINIUM: 







Aluminium 

Part Number Description Fits Models 

DUCAXLESET Full set of 3 Axle Nuts 748/916/996/998 

LDUCNUT40 Front Spindle Collar 848/1098 


Part Number Description Fits Models 

LSSSPDUC01 

Front Caliper Pinch Bolt 

M8 x 40mm - low head profile 

748/916/996/998 

Titanium 


A TISPDUC01 

748/916/996/998 - Front Caliper Pinch Bolt 

B TISPDUC01-8 748/916/996/998 - Front Caliper Pinch Bolts - Set of 8 

C TISPDUC03 

748/916/996/998 - Rear Hub Pinch Bolt 

D TISPDUC14 

749/916/996/998 Side Stand Pivot Bolt 

E TISPDUC40 

1098 Rear Hub Pinch Bolt - M12 x 40mm 

F TISPDUC37 

1098 Swingarm Pivot Shaft & Nut 

G TISPDUC23 

Monster Footrest Hanger Bolt M10 x 47mm 

H TISPDUC26 

Monster Footrest Hanger Bolt M10 x 58mm 

I TISPDUC24 

Monster Footrest Hanger M10 x 37mm 

J TISPDUCAXLESET Full set of Axle Nuts 

B 

I 

E 

G 

H 

A 

C 

D 

F 

J 

70 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Honda 

Part Number 

A TISPHO95 

B TISPHO82 

Description 

CBR1000RR ‘04-’07 Swingarm Pivot Inner Nut Right Side 

CBR1000RR ‘04-’07 Rear Subframe Dome Head Bolt 

M8 x 16mm 

C TISPHO73 CBR1000RR/VTR1000 ‘04-’07 Swingarm Lock Nut 

Left Side 36mm 

D TISPHO74 CBR600F4/RR ‘99-’06 Airbox Bolt 

E TISPHO40 CBR600RR 03-04 Subframe Dome Head Bolt M10 x 

1.25mm x 40mm 

F TISPHO71 CBR600RR ‘03-’06/VFR800 ‘02-’07 Swingarm Pivot Nut 

Right Side 

G TISPHO38 CBR600RR/1000RR ‘03’-’05 Rear Sprocket Stud 

H TISPHO38-6 CBR600RR/1000RR ‘03’-’05 Rear Sprocket Studs - Set of 6 

I TISPHO19 NC30/NC35 - Rear Sprocket Stud - Each 

F 

Titanium 



E 

A 

G 

H 

C 

I 

B 

D 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

71


Kawasaki 

Part Number 

A TISPKAW01 

B TIDISCYAM20 

C TISPKAW05 

Description 

Various - Footrest Hanger Bolt M8 x 30mm 

Various - Footrest Hanger Bolt M8 x 20mm 

Various -Footrest Hanger Bolt M10 x 30mm 

C 

A 

B 

MV Agusta F4 


A TISPMV01 Front Axle Pinch Bolt - M10 x 32mm 

B TISPMV06-2 Pair of Rear Hub Pinch Bolts M12 x 50mm set of 2 

C TISPMV08 Side Stand Spring Bar 

D TISPMV15 Front Caliper Pinch Bolt - M8 x 44mm 

E TISPMV17 Frame Bolt with Shoulder - each 

B 

C 

A 

E 

D 

72 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

Suzuki 

Part Number 

A TISPSU08 

B TISPSU24 

C TISPSU42 

D TISPSU46 

E TISPSU52 

Description 

GSXR Cam Cover Pinch/Retaining Bolt 

Bandit 600/1200 Rear Torque Arm Bolt 

Suzuki M16 x 1.50mm Oil Bung 

GSXR600/750/1000 K6/K7 Rear Brake Caliper 

Slide Bolt - each 

GSXR Right Side Swing Arm Pivot Nut 

Titanium 



E 

D 

A 

B 

C 

Yamaha 

Part Number 

Description 

A TISPYAM12 

R6 1999-2002 Rear Brake 

Caliper Slide Bolt 

A 

B TISPYAM14 

R6 2003-2007/R12004-2008 

Rear Caliper Slide Bolt 

D 

C TISPYAM21 R6 2005-2006/ R1 2004-2008 

Front Brake Lever Pivot Bolt 

E 

D TISPYAM19 

E TISPYAM02 

R1 2002-2003 Rear Caliper 

Slide Bolt 

R1 Front Mudguard Bolt 

M6 x 20mm 

16mm Head Diameter 

5mm Head Height 

C 

B 


mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

73

ANCILLARY ITEMS 

Aluminium Threaded Collars/Spacers 

Part Number 

LCOLLAR5-7-3 

LCOLLAR5-7-5 

LCOLLAR5-7-10 

LCOLLAR6-8-3 

LCOLLAR6-8-5 

LCOLLAR6-8-10 

LCOLLAR6-10-6 

LCOLLAR8-10-5 

Description 

5mm Threaded Collar - 7.5mm o/d - 3mm in Length 



6mm Threaded Collar - 8mm o/d - 3mm in Length 



6mm Threaded Collar -10.5mm o/d - 6mm in Length 

8mm Threaded Collar -10mm o/d - 5mm in Length 

Steel Washers 


LWASQR 

Steel 'Grippa' Washers for M6 Quick Release Studs 

Copper Washers 


LWCOP10 M10 x 13.5mm O/d 

Plastic Washers 


LWAN4 

M4 Fairing Plastic Washer 

LWAN5 


LWAN6 


LWAN8 


LWACR6 

M6 Countersunk Rubber Washer 

LWACR8 

M8 Countersunk Rubber Washer 

LWASITEM Washer for Suzuki Cam Cover Bolt 

Plastic Tubing/Spacers/Collars 


TUB5 

M5 Spacer/Tubing 

TUB6 

M6 Spacer/Tubing 

74 

sales uk 0044 (0) 1684 851940 

www.pro-bolt.com

Backing Plates & Receptacles 


CLIP2 

M5 Chimney Nut / Slip On - 14mm width 

CLIP5 

M5 Chimney Nut / Slip On - 12mm width 

CLIP1 

M6 Chimney Nut / Slip On 

CLIP4 

M8 Chimney Nut / Slip On 

CLIP6 

Receptacle for Quick Release- Rivet On 

CLIP3 

Receptacle for Quick Release- Slide On 

CLIP7 

M5 Chimney Nut / Weld On 

CLIP8 

M6 Chimney Nut / Weld On 

CLIP9 

Race Fairing S Clip 

CLIP-20 Race Fairing S Clip - Pack of 20 

LWARQR 

Plastic Washer for Quick Release Stud 

LWASQR 

Steel Grippa Washer for M6 Quick Release Stud 

LRIVET3.2-6 Blind rivet 3.2mm diameter x 6mm length 

Allen Keys 


AK1.5 

1.5mm Allen Key 

AK2 

2mm Allen Key 

AK2.5 

2.5mm Allen key 

AK3 

3mm Allen Key 

AK4 

4mm Allen Key 

AK5 

5mm Allen Key 

AK6 

6mm Allen Key 

Rubber Well Nuts 


LRNUT4F M4 (0.5mm - Fine Pitch) Ducati Rubber Nut 

LRN5 

M5 Rubber Nut - 13mm Length 

LRN6 


LRN6-25 


LRN8 


Lockwire 

Part Number 

LOCKWIRE 51 

LOCKWIRE 62 

Description 

0.5mm Diameter 

0.61mm Diameter 

Supplied in 1 metre Lengths 

ANCILLARY ITEMS 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

75

UNC STAINLESS STEEL 

FLANGED HEAD BOLTS 

Won’t chip and peel like chrome! Our unique Flanged 

Hex Head Bolts are machined with an attractive convex 

dome to reflect the maximum light on a Hex Head 

Bolt. They are also designed with a captive washer for 

maximum effect. Polished to a mirror finish, supplied in 

any quantity, or packs of 5. 

Thread 

Diameter 

Pitch 

Socket 

Size 

Max Head 

Diameter 

Lengths 

Available 

1/4” 20TPI 1/4” 0.390” 5/8”, 3/4”, 7/8”, 1”, 

1-3/16”, 1-1/4”, 1- 

3/8”, 1-1/2”, 1-3/4”, 

2”, 2-1/4”, 2-1/2”, 

2-3/4”, 4”, 4-3/4” 

5/16” 18TPI 5/16” 0.490” 3/4”, 1”, 1-1/4”, 

1-1/2”, 1-3/4”, 2”, 

2-1/4”, 2-1/2” 

3/8” 16TPI 3/8” 0.618” 3/4”, 1”, 1-1/4”, 

1-1/2”, 1-3/4”, 2”, 

2-1/2” 

SPIKE HEAD BOLTS 

New Spike Head design unique to Pro-Bolt! Machined 

to maximum length allowing for socket fitment and 

finished with a captive washer. Polished to a mirror finish, 

supplied in any quantity, or in packs of 5. 

Thread 

Diameter 

Pitch 

Socket 

Size 

Max Head 

Diameter 

Lengths 

Available 

1/4” 20TPI 1/4” 0.390” 5/8”, 3/4”, 7/8”, 1”, 

1-3/16”, 1-1/4”, 1- 

3/8”, 1-1/2”, 1-3/4”, 

2”, 2-1/4”, 2-1/2”, 

2-3/4”, 4”, 4-3/4” 

5/16” 18TPI 5/16” 0.490” 3/4”, 1”, 1-1/4”, 

1-1/2”, 1-3/4”, 2”, 

2-1/4”, 2-1/2” 

3/8” 16TPI 3/8” 0.618” 3/4”, 1”, 1-1/4”, 

1-1/2”, 1-3/4”, 2”, 

2-1/2” 

76 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

DOME HEAD BOLTS 

UNC Stainless Steel 


Our Dome Head Bolts are ideal for use on Derby/Clutch 

Cover or any bodywork. The attractive domed heads are 

manufactured with the smallest possible allen key drive 

for the most appealing cosmetic appearance. Polished to 

a mirror finish, supplied in any quantity, or in packs of 5. 

Thread 

Diameter 

Pitch 

Allen Key 

Drive 

Max Head 

Diameter 

Lengths 

Available 

5/32” 32TPI 5/32” 5/16” 1/2”, 5/8” 

1/4” 20TPI 1/4” 7/16” 1/2”, 9/16”, 5/8”, 

11/16”, 3/4”, 2-1/2” 

COUNTERSUNK BOLTS 

Countersunk Bolts are measured in length including the 

head. We can supply countersunk washers separately 

which are designed to be used with this type of bolt. 

Ideal where a large diameter spread is required to 

prevent bolts pulling through bodywork etc and where 

a low head profile is essential. Polished to a mirror finish, 

supplied in any quantity or packs of 5. 

Thread 

Diameter 

Pitch 

Allen Key 

Drive 

Max Head 

Diameter 

1/4” 20TPI 1/4” 1/2” 5/8” 

FLAT WASHERS 

Lengths 

Available 

Precision manufactured Flat Washers, polished to a 

mirror finish. 

Size Outside Diameter Thickness 

1/4” 5/8” 1/16” 

1/4” 3/8” 1/16” 

5/16” 11/16” 1/16” 

UNC STAINLESS STEEL 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

77

SPECIAL PARTS SUITABLE FOR HARLEY-DAVIDSON ® MODELS 

IMPERIAL FASTENERS AND KITS SUITABLE 

FOR HARLEY-DAVIDSON ® MODELS 

POLISHED 

STAINLESS 100% STEEL 

Replace rusted, damaged and dull bolts with our high grade stainless 

steel versions. As with all our Stainless Steel, they are polished to a 

mirror finish so will complement our Engine Casing Bolt range. 

Engine Covers 

We offer bolt kits for specific models - just choose your look from 

either our unique Spike Head or Flanged Hex Head! 

Kits are available for Primary Covers, Transmission Covers, Cam 

Covers, Lifter Block Covers, Rocker Box Covers and Gearcase/Front 

Sprocket Covers. 

All our fasteners exceed D.O.D, M.O.T and factory standards. 

Engine Cover Boxed Sets 

Transform the look of your bike with our Boxed Sets which enable 

you to replace lost, corroded or simply dull fasteners and achieve a 

superior look. 

Fitment is easy - remove one bolt at a time, and replace with the 

identical length bolt from your Pro-Bolt kit, apply the Threadlock 

provided and torque to your manufacturers recommended setting. 

Special Parts suitable for Harley-Davidson ® Models 

To continue the look, we supply a number of special parts 

which are generally universal across a wide range of models. 

Stock Code Description Thread Diameter Threads Pitch Length Qty Per Pack 

LSSDISCHDUNC210 Front Disc Bolt - Button Head 5/16" 18 tpi 7/8" 1 

LSSDISCHDUNC312 Rear Disc Bolt - Button Head 3/8" 16 tpi 1" 1 

SSHD46646-05 Front Disc Bolts - Set of 5 5/16" 18 tpi 7/8" 1 Pack = 5 Pieces 

SSHD46647-05 Rear Disc Bolts - Set of 5 3/8" 16 tpi 1" 1 Pack = 5 Pieces 

LSSSPHD02 Head Bolt - Individual Bolt 3/8" UNC Internal Thread 16 tpi 1 7/8" 1 

LSSSPHD03 Head Bolt - Individual Bolt 3/8" UNC Internal Thread 16 tpi 3 1/6" 1 

SSHDHEADBOLT 

Head Cover Bolt Kit (4 Long & 4 Short) 83-'06 Twin Cam/Big 

Twin and -('07-'10 1584) (TC88, TC96 and TC96B) 

1 Pack = 8 Pieces 

SSHD41843-08 Front Banjo Bolt Set 06 VRSC/'08 Touring 1 Pack = 7 Pieces 

78 

sales 0044 (0) 1684 851940 

www.pro-bolt.com



Imperial Workshop Boxes 

For large scale projects or just a convenient source of 

replacements, we supply workshop boxes comprising of 

the most widely used fasteners. 

Exact contents are available on-line and can be amended if 

desired - with the agreement of Pro-Bolt. 

Stock 

Code 

WSBOX155UNCHXSS 

WSBOX155UNCSKSS 

WSBOX200UNCMIXSS 

WSCAB500IMPSS 

Description 

Stainless Steel UNC Workshop Box 

- Flanged Hex Head Bolts 


- Spike Head Bolts 


- Flanged Hex Head and Spike Head Bolts 

Stainless Steel UNC Workshop Cabinet 

- Flanged Hex Head Bolt, Spike Head Bolts and Washers 

Qty 

Per Pack 

155 

155 

200 

500 

HARLEY-DAVIDSON MODELS ® 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

79

WORLDWIDE DISTRIBUTORS 

Europe 

Austria Business Opportunity Available 0044 1684 851940 

Pro-Bolt Worldwide 

louisa.harker@pro-bolt.com 

Bulgaria Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Belgium Bike Design Belgium 0032 5245 3361 info@bike-design.be 

Croatia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Cyprus J L Motorace Ltd 00357 22752234 motorace@cytanet.com.cy 

Czech Republic Bikers Crown 00420 495 484 255 import@bikerscrown.cz 

Czech Republic Prorace System 00420 608 346650 hanyk@prorace.cz 

Denmark Pro-Bolt Denmark 0045 33228070 sales@probolt.dk 

Estonia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Finland Sportbike Uskola Ltd 00358 41 546 2704 jussi.uskola@db.com 

France Pro-Bolt France See website for details sales@probolt-france.com 

Germany Custom Chrome Europe 0049 671 888880 info@customchrome.de 

Germany Pro-Bolt Germany 0049 21193 85270 sales@probolt-germany.com 

Germany Team Metisse GMBH 0049 5373 9240 780 info@metisse.de 

Greece Moto Shop Grigorios Yiatilis 0030 210 921 4315 argosrr@otenet.gr 

Hungary X - Bikes 0036 1405 6653 info@szabb.hu 

Ireland Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Italy Faster96 srl 0039 0517 26849 info@faster96.com 

Latvia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Lithuania Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Malta M A Motorcycle Centre 00356 491790 mamotorcycles@orbit.net.mt 

Netherlands Pro-Bolt Holland See website for details sales@probolt-holland.com 

Netherlands Ten Kate Racing Products 0031 529488815 info@tenkateracingproducts.com 

Netherlands Zodiac International 0031 297 28 86 21 sales@zodiac.nl 

Norway PitStop Motorcyle Import 0047 91126731 post@pitstopmcimport.no 

Norway Bikerman AS 0047 51 53 83 73 post@bikerman.no 

Norway FN Sykkel (Cycle Parts) 0047 997 13 354 post@fn-sykkel.no 

Poland Dyno-Tech 0048 608 655 130 dynotech@wp.pl 

Poland Sime Promotion (Cycle Parts) 0048 502498640 Sime@interia.pl 

Poland Vincere Piotr Ulicki (Cycle Parts) 0048 500 014 768 sklep@vincere.pl 

Portugal Full Control Motos 00351 961 414 913 fullcontrol.motos@tvtel.pt 

Romania Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Russia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Slovakia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Slovenia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Spain Totimport 0034 966 850 547 totimport@totimport.com 

Sweden Bikersneed Sweden 0046 707 135272 roger@bikersneed.se 

Sweden Boove Aktiebolag 0046 8 7610266 erik.andersin@boove.se 

Switzerland Pro-Bolt Switzerland 0041 793738087 sales@pro-bolt.ch 

Switzerland Suter Racing Technology 0041 523971060 srt@suterracing.ch 

Turkey Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Ukraine Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

North & South America & Canada 

America Pro-Bolt USA 1888 251 1644 sales@probolt-usa.com 

America Tucker Rocky Distributing 001 817 258 9241 sales@tuckerrocky.com 

Argentina Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Brazil Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Canada Blue Streak Racing 001 519 878 9866 bsrtech@xplornet.com 

Mexico Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Puerto Rico 2 Ruedas Distributor 001 787 735 4671 2ruedas@coqui.net 

Africa 

South Africa Pro-Bolt South Africa 0027 218 560 448 info@ pro-bolt.co.za 

Australia & New Zealand 

Australia Pro-Bolt Australia 0061 397925025 sales@probolt-australia.com 

New Caledonia Zone Rouge Sarl 00687 779 177 zonerouge.nc@gmail.com 

New Zealand NZ Streetfighters Ltd 0064 7 5779870 sales@nzstreetfighters.com 

New Zealand Prescott Engineering 0064 9 5797424 prescott@woosh.co.nz 

Middle/Far East 

Dubai Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

India Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Israel Reshef-Tech 00972 8 8672621 ronen@reshef-tech.com 

Japan Pro-Bolt Japan 0081 566 62 8605 sales@probolt-japan.com 

Japan Pacmax 0081 476 35 2680 sales@pacmax.com 

South East Asia 

Indonesia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Malaysia Business Opportunity Available 0044 1684 851940 louisa.harker@pro-bolt.com 

Singapore Biketech 21 0065 6392 1230 biketech21sg@yahoo.com 

Thailand MPK Concept 0066 26115679 artit_n@hotmail.com 

80 

sales 0044 (0) 1684 851940 

www.pro-bolt.com

DISPLAY STANDS 

We offer a variety of lightweight, pop-up display 

stands, developed to hold a range of stock options 

to suit most dealers. We would also be happy to 

customise a specific display. 

For more details please email sales@pro-bolt.com. 

PRO-BOLT WORLDWIDE 

Pro-Bolt has global websites based in 

many countries around the world, offering 

local sales support and advice using local 

language and currency. 

The list of countries is 

constantly growing – 

please see our 

main website 

www.pro-bolt.com 

for details. 

mm 10 20 30 40 50 60 70 80 90 100 110 120 130 140 

81


PRO-BOLT WORLDWIDE 

We have websites in the following countries, where you will find 

local languages, local currency and local support: 

Australia 

Denmark 

France 

Germany 

Japan 

South Africa 

Switzerland 

United States 

www.probolt-australia.com 

www.probolt.dk 

www.probolt-france.com 

www.probolt-germany.com 

www.probolt-japan.com 

www.probolt.co.za 

www.pro-bolt.ch 

www.probolt-usa.com 

Visit our main website www.pro-bolt.com for latest information 

82 

Pro-Bolt Ltd, Unit F, 6400 Severn Drive, Tewkesbury Business Park, Tewkesbury, Glos GL20 8SF. UK 

sales 0044 (0) 1684 851940 

www.pro-bolt.com 

Tel: 0044 (0)1684 851940 Fax: 0044 (0) 1684 850080 Email: info@pro-bolt.com Online: www.pro-bolt.com

TITANIUM PARTS

Create successful ePaper yourself

Delete template?

Save as template?