copolymer
SYNTRAN 1921 - Interpolymer
SYNTRAN 1921 - Interpolymer
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
SYNTRAN ® 1921<br />
NEW FROM INTERPOLYMER<br />
ZINC FREE, ACRYLIC CO-POLYMER<br />
Interpolymer Corp. is pleased to introduce NEW, PROPRIETARY Acrylic <strong>copolymer</strong><br />
technology for the expanding “Green” marketplace.<br />
SYNTRAN 1921 is a zinc, ammonia and APE surfactant free acrylic <strong>copolymer</strong>.<br />
SYNTRAN 1921’s proprietary cross-linking system will add extended life to<br />
green floor polishes.<br />
Typical Properties of Emulsion<br />
POLYMER TYPE<br />
Acrylate Copolymer<br />
TOTAL SOLIDS 38%<br />
PH @ 22 o C 8.0<br />
SPECIFIC GRAVITY @ 22 o C 1.054<br />
VISCOSITY @ 22 o C<br />
60 cps (Brookfield)<br />
MINIMUM FILM FORMATION TEMPERATURE 75 o C<br />
CHARGE OF EMULSION PARTICLE<br />
HEAT STABILITY @ 52 o C<br />
FREEZE-THAW STABILITY<br />
Negative<br />
Unchanged after 30 days<br />
Protect from Freezing<br />
03/06 wft<br />
The suggestions and data included are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We<br />
recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. It is the buyer’s responsibility to determine the suitability of the above<br />
formulation through quality control and field testing. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any existing or pending patents.
SYNTRAN ® 1921<br />
Zinc free polymer for “Green” floor finishes<br />
SYNTRAN 1921 in Formulation F-52-086 is suggested as a starting point<br />
green floor polish formulation for maintenance programs where occasional<br />
burnishing will be utilized. Formulation F-52-086 is zinc, ammonia and<br />
APE surfactant free, with a low VOC content.<br />
Formulation F-52-086-01 @ 21% N.V.<br />
Mix in Order Listed:<br />
Pounds Weight %<br />
Water 392.64 45.62<br />
Bactericide q.s. q.s.<br />
Premixed Plasticizers:<br />
Tributoxyethyl Phosphate 25.08 2.92<br />
Diethylene Glycol Ethyl Ether 18.06 2.10<br />
1% Active Zonyl FSA 4.01 0.47<br />
Dipropylene Glycol methyl Ether 17.10 2.00<br />
Tomadol 23-3 5.02 0.60<br />
SYNTRAN 1921 @ 38% N.V. 356.45 41.45<br />
SYNTRAN 6160 @ 35% N.V. 25.80 3.00<br />
SYNTRAN PA-1465 @ 38% N.V. 15.84 1.84<br />
Defoamer q.s. q.s.<br />
_____<br />
_____<br />
YIELD: 860.00 100.00%<br />
pH: 8.0+ 0.2<br />
Polymer/Resin/Wax Ratio: 90 / 0 / 10 3/2006<br />
The suggestions and data included are based on information we believe to be reliable. They are offered in good faith, but without guarantee, as conditions and methods of use of our products are beyond our control. We<br />
recommend that the prospective user determine the suitability of our materials and suggestions before adopting them on a commercial scale. It is the buyer’s responsibility to determine the suitability of the above<br />
formulation through quality control and field testing. Suggestions for uses of our products should not be understood as recommendations that they be used in violation of any existing or pending patents.
Change language