Architectural Outdoor Lighting Solutions
Lighting Solutions Architectural Outdoor - Architectural Area Lighting
Lighting Solutions Architectural Outdoor - Architectural Area Lighting
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Special LED Insert<br />
how it<br />
works<br />
The exclusive precision aiming system of AAL's Designer SSL Series ensures that even when<br />
looking directly at the luminaire, only one-half of the LEDs can be viewed at any given time. This<br />
results in 50% less glare when compared to other exposed, unshielded LED systems. In addition,<br />
AAL's MicroEmitters are aimed at various angles to maximize uniformity, improve comfort,<br />
and properly direct illumination to the target zone.<br />
Entire EmitterDeck<br />
is Upgradeable as LED<br />
Technology Advances<br />
Canted MicroEmitter<br />
design precisely aims each<br />
diode at 70°, 60°, or 50° angles<br />
for maximum reach and uniform<br />
illumination.<br />
Glare guard perimeter<br />
and center reflectors<br />
redirect stray light.<br />
Deeply regressed<br />
sources maximize<br />
efficiency while<br />
reducing glare.<br />
Aluminum dissipates heat<br />
away from LEDs.<br />
Factory preset aiming notches<br />
Quick-connect for easy<br />
installation<br />
EmitterDeck carrier plate<br />
Individual MicroEmitters<br />
are easily field changeable.<br />
Redirected side-candela<br />
(3) High output diodes<br />
Upper parabolic curvature<br />
redirects light below pole<br />
MicroEmitter reflector cap<br />
Redirected side-candela<br />
Lower parabolic curvature<br />
redirects light forward<br />
Targeted, precisely<br />
controlled LED<br />
illumination<br />
Illustration of a single MicroEmitter at 70° angle<br />
SPECIAL ARCHITECTURAL LED INSERT AREA LIGHTING<br />
PATENTS PENDING<br />
III