Kernel Parameters
BKernel Parameters
BKernel Parameters
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
06<br />
07<br />
08<br />
usbcore.autosuspend=<br />
[USB] The autosuspend time delay (in seconds) used<br />
for newly-detected USB devices (default 2). This<br />
is the time required before an idle device will be<br />
autosuspended. Devices for which the delay is set<br />
to 0 won't be autosuspended at all.<br />
09<br />
B<br />
usbhid.mousepoll=<br />
[USBHID] The interval which mice are to be polled at.<br />
<strong>Kernel</strong> <strong>Parameters</strong><br />
vdso=<br />
[IA-32,SH]<br />
vdso=1: enable VDSO (default)<br />
vdso=0: disable VDSO mapping<br />
video= [FB] Frame buffer configuration<br />
See Documentation/fb/modedb.txt.<br />
vga=<br />
[BOOT,IA-32] Select a particular video mode<br />
See Documentation/i386/boot.txt and<br />
Documentation/svga.txt.<br />
Use vga=ask for menu.<br />
This is actually a boot loader parameter; the value is<br />
passed to the kernel using a special protocol.<br />
80