DuPont™ Solid Surfaces shapes collection
DuPont™ Solid Surfaces shapes collection
DuPont™ Solid Surfaces shapes collection
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DuPont <strong>Solid</strong> <strong>Surfaces</strong><br />
<strong>shapes</strong> <strong>collection</strong>
DuPont <strong>Solid</strong> <strong>Surfaces</strong> <strong>shapes</strong> <strong>collection</strong><br />
offers a comprehensive range of kitchen<br />
sinks and washbasins that enable you to<br />
create a seamless, flowing design in your<br />
kitchen or bathroom.<br />
The sinks and washbasins are integrated<br />
into your surface using a seamless<br />
undermounting technique, which eliminates<br />
open seams that trap germs and dirt,<br />
making the entire area very easy to clean<br />
and maintain.<br />
By integrating single or double sinks in your<br />
kitchen, you can create a functionally seamless,<br />
solid worktop that is as aesthetically<br />
pleasing as it is practical and worry-free.<br />
Integration of one or more washbasins<br />
will allow you to create a “one-piece”<br />
vanity top – an essential element in today’s<br />
sleek, design-oriented bathroom.<br />
Use & Care<br />
DuPont <strong>Solid</strong> <strong>Surfaces</strong> <strong>shapes</strong> are made of<br />
proprietary DuPont resin and natural minerals.<br />
Non-porous by nature, they are highly resistant<br />
to stains, and easy to clean and care for.<br />
With minimal care, their original appearance<br />
can be maintained for many years.<br />
The inherent qualities of DuPont <strong>Solid</strong> Surface<br />
<strong>shapes</strong> – including stain-, impact- and<br />
thermal-resistance – are tested and approved<br />
with reference to ANSI standards for sinks.<br />
For detailed instructions, please ask your DuPont<br />
specialist for guidelines on use and care.<br />
Warranty<br />
DuPont <strong>Solid</strong> <strong>Surfaces</strong> <strong>shapes</strong> are backed<br />
by a 10-Year Limited Product Warranty.
328 mm<br />
366 mm<br />
MB 820<br />
471 mm<br />
395 mm<br />
*<br />
TOP VIEW<br />
* integrated overflow<br />
141 mm<br />
SIDE CROSS-SECTION<br />
MB 826<br />
572 mm<br />
519 mm<br />
*<br />
TOP VIEW<br />
* integrated overflow<br />
151 mm<br />
SIDE CROSS-SECTION<br />
191 mm<br />
201 mm<br />
393 mm<br />
419 mm<br />
380 mm<br />
298 mm<br />
MB 957<br />
206 mm<br />
*<br />
153 mm<br />
TOP VIEW<br />
* overflow<br />
130 mm<br />
352 mm<br />
SIDE CROSS-SECTION<br />
*<br />
MB 958<br />
497 mm<br />
440 mm<br />
TOP VIEW<br />
* overflow<br />
186 mm<br />
146 mm<br />
FRONT CROSS-SECTION<br />
435 mm<br />
202 mm
339 mm<br />
377 mm<br />
*<br />
MB 959 MB 904 **<br />
MB 968<br />
*<br />
489 mm<br />
438 mm<br />
TOP VIEW<br />
* overflow<br />
415 mm<br />
371 mm<br />
TOP VIEW<br />
* overflow<br />
196 mm<br />
FRONT CROSS-SECTION<br />
421 mm<br />
143 mm 159 mm<br />
FRONT CROSS-SECTION<br />
386 mm<br />
212 mm<br />
400 mm<br />
400 mm<br />
445 mm<br />
400 mm<br />
TOP VIEW<br />
590 mm<br />
550 mm<br />
294 mm<br />
FRONT CROSS-SECTION<br />
MB 905 **<br />
TOP VIEW<br />
294 mm<br />
FRONT CROSS-SECTION<br />
445 mm<br />
310 mm<br />
441 mm<br />
310 mm
401 mm<br />
41o mm<br />
255 mm<br />
MB 921<br />
811 mm<br />
760 mm<br />
*<br />
355 mm 355 mm<br />
TOP VIEW<br />
* overflow<br />
871 mm<br />
830 mm<br />
TOP VIEW<br />
* overflow<br />
545 mm<br />
194 mm<br />
203 mm<br />
FRONT CROSS-SECTION<br />
MB 971<br />
FRONT CROSS-SECTION<br />
*<br />
454 mm<br />
219 mm<br />
210 mm<br />
444 mm<br />
Colour options<br />
All <strong>shapes</strong> are available in Natural White colour<br />
Natural White<br />
Mounting options<br />
Undermount: – Seamless<br />
– Classical<br />
Note: a tolerance of +/- 2% should be considered<br />
for all shape dimensions. We recommend that the<br />
shape is accurately measured before the cut-out in<br />
the sheet is made.<br />
** 904 & 905 sink models are offered without<br />
overflow holes and accessories in order to<br />
allow use in laboratory applications.
ANSI Z124.6 Test for Sinks<br />
PHYSICAL PROPERTIES ANSI 124.6-1997 Results<br />
Surface test 3.3 Pass; no crack, chips or porosity<br />
Subsurface test 3.4 Pass; no voids<br />
Point impact load test 4.2.1 Pass; no crack or chips<br />
Knife drop test 4.2.2 Pass; no crack or chips<br />
Load test 4.3 Pass; no crack<br />
Vibration test 4.4 Pass; no fracture<br />
Colour fastness test 5.1 Pass<br />
Stain resistance test 5.2 Pass<br />
Wear & cleanability test 5.3 Pass<br />
Cigarette test 5.4 Pass<br />
Chemical resistance test 5.5 Pass<br />
Heated pan test 5.6 Pass<br />
Hot wax test 5.7 Pass<br />
Water resistance test 6.2 Pass<br />
Thermal shock performance 6.1.2 Pass<br />
Tests performed in accordance with ANSI Z124.6-1997<br />
Date of report 11-18-04<br />
Report# 65150904sp2<br />
DuPont <strong>Solid</strong> <strong>Surfaces</strong> <strong>shapes</strong> passed tests on Resistance to temperature changes<br />
(hydro-thermal shock resistance), performed by LGA Qualitest GmbH in accordance with<br />
EN 13310 (for sinks) and prEN 14688 (for washbasins).<br />
For more information about<br />
DuPont <strong>Solid</strong> <strong>Surfaces</strong> products, please call:<br />
800/962 116 (UK), 1800/553 252 (IRL), 0800/91 72 72 (F),<br />
0800/1810018 (D), 0800/554614 (CH), 800/876750 (I),<br />
0800/29 5833 (A), 0800/96 666 (B), 800/23079 (L), 901/120 089 (E),<br />
0800/022 35 00 (NL), ++351 227 536 900 (Portugal),<br />
++30 210 3418050 (Greece), ++46 31 697 580 (Nordic Countries),<br />
++7 495 789 2363 (Russia, Ukraine & Kazakhstan),<br />
++40 316 20 41 11 (Romania, Bulgaria & Serbia),<br />
++420 257 414 213 (Czech republic, Slovakia & Hungary),<br />
++32 15 47 3273 (Central & Eastern Europe),<br />
++971 4 321 1530 (Pakistan, Middle East, Africa, Malta & Cyprus),<br />
++90 212 340 0400 (Turkey, Israel & Central Asia*)<br />
* = Azerbaijan, Turkmenistan, Uzbekistan and Kyrgyzstan<br />
Copyright © 2007 DuPont. The DuPont Oval Logo, DuPont, The miracles of science<br />
and DuPont <strong>Solid</strong> <strong>Surfaces</strong> are registered trademarks or trademarks of E. I. du Pont de Nemours<br />
and Company or its affiliates. Only DuPont produces DuPont <strong>Solid</strong> <strong>Surfaces</strong>.<br />
Creation & Production – Printed in Belgium – L-13842-00 (05/07)