ALPHA BROCHURE

ALPHA ® Series Air-Cooled MIG Gun Ordering Information
ALPHA Series MIG-Guns are available in180, 250, 350, and 400 amperes with various configurations based on degree of
swannecks, cable length, noz zle bore size, wire size and rear end connection. Refer to the detailed instruction below to determine
the ALPHA part number that best suits your requirements. If you have any questions, please contact Customer Service at
1.800.542.4867.
ALPHA AIR COOLED GUNS
ORDERING INSTRUCTIONS FOR CO MPLETE GUNS
S T A N D A R D O R D E R I N G
O P T I O N S
A / AF3 1 5 T - 3 5 4 5 L1 C B
TORCH MODELS
CABLE LENGTH
NOZZEL TYPE
WIRE SIZE
BACK END
CUSTOM
OPTIONS
CUSTOM
OPTIONS
EXPANSION
SPACE
A = REMOVABLE NECK
AF = FIXED NECK
CUSTOM OPTIONS
TORCH MODEL
A - A1-22 SWANNECK
B - A1-45 SWANNECK
A1 = ALPHA 1 MIG GUN
C - A2T-22 SWANNECK
A2 = ALPHA 2 MIG GUN
D - A2T-45 SWANNECK
A3 = ALPHA 3 MIG GUN
F - A2T-60S SWANNECK
A4 = ALPHA 4 MIG GUN
G - A2T-22 SWANNECK
H - A3T-45 SWANNECK
CABLE LENGTH
K - A3T-60S SWANNECK
L - A4T-22 SWANNECK
10 - 10 FT N - A4T-45 SWANNECK
12 - 12 FT O - A4T-60S SWANNECK
15 - 15 FT P - A4T-22-HD SWANNECK
20 - 20 FT R - A4T-45-HD SWANNECK
25 - 25 FT S - AF3T-45S
T - AF3T-45S
NOZZELS
HANDLE OPTIONS
T = THREADED
NO LETTER = SLIP-ON A - STANDARD
HANDLE TRIGGER
C - COMPACT SMALL HANDLE
WIRE SIZE
& SHORT NECK
E - EXTENDED TRIGGER
3545 = .035” - .045” L - LOCKING TRIGGER
116 = .052” - .062” DS - DUAL SCEDULE w/
332 = .078” - .094” ROCKER SWITCH 4 WIRE
DS1 - DUAL SCEDULE w/
ROCKER SWITCH 3 WIRE
BACK END MS - DUAL SCEDULE w/
SINGLE PULL SWITCH 4 WIRE
L = LINCOLN EXTRNAL GAS MS1 -DUAL SCEDULE w/
L1 = LINCOLN 10
SINGLE PULL SWITCH 3 WIRE
HT = HOBART/TWECO
CMS - COMPACT DUAL SCHDULE
M = MILLER
w/SINGLE PULL SWITCH
E = EURO
4 WIRE
P - HANDLE ERGO SMALL
All guns delivered with 60 degree swanneck standard
4 CALL 1.800.542.4867