SUPRA-MIG-GUN

¤
Water-Cooled Supra-MIG-Guns ®
Introducing Tweco’s new line of water-cooled MIG
guns…the Supra-MIG Gun ® . These MIG guns stand up
to the abuse water-cooled guns are given. All models
are lightweight, well balanced and cool running for
maximum efficiency and comfort. Maintenance on
Water-Coolers
• Designed for MIG-guns up to 800 Amps
and TIG torches up to 500 amps
• Stainless steel construction eliminates
coolant contamination due to electrolyte
and chemical reactions
• High efficiency radiator design pulls outside
air through radiator
• Reservoir equipped with filter, which enhances
pump life
• Large water flow/level indicator makes it
easy to monitor cooler operation from a
distance
• All major components are easily accessible
for fast easy maintenance
• Both style pumps equipped with a bypass
to eliminate excessive pump wear
• All coolant passes through radiator for
more efficient cooling
these guns is minimal due to ease and simplicity of
design. Quick connections at all fittings makes maintenance
a snap thus reducing down time. Available
in 300 and 450 amp models with 10, 12 and 15 foot
cable lengths.
Rotary Vane Pump
• 1.8 gpm at 50 psi
• 1.5 gpm at 100 psi
• Enhanced pump life
Rotary Gear Pump
• 1.8 gpm at 50 psi
• 1.5 gpm at 200 psi
• Built in bypass to tank - Bypass
water cooled through radiator
• Repair kit available
Specifications:
• Two interchangeable pump designs offered
• Factory set at 50 psi, adjustable to 100 psi
• 2.5 gallon reservoir
• 115 or 230 volt single phase, 50/60 hz
• 12,000 BTU
• 18"L x 9-1/4"W x 12-3/8" H
• 5/8" left-hand standard inert gas fittings
• 8' power cord
• Highly visible water level and flow sight glass
• Thermal overload
• Net weight: 42 lbs.
Use genuine Tweco parts and consumables to protect the quality of your welds and the life of your gun!