FLEXTECH PACKAGING LTD
View Pictorial Brochure - Joseph Finn Co., Inc.
View Pictorial Brochure - Joseph Finn Co., Inc.
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PUBLIC AUCTION SALE<br />
PUBLIC AUCTION SALE • ONSITE AND WEBCAST<br />
MULTI-LAYER BLOWN FILM PLANT<br />
2002 ALPINE 80” 7 LAYER LINE<br />
1998 ALPINE 80” 5 LAYER LINE<br />
2005 RULLI STANDARD 1800MM 5 LAYER LINE<br />
SLITTER • PELLETIZERS • CHILLERS<br />
LABORATORY • PELLET AND PLANT EQUIPMENT<br />
<strong>FLEXTECH</strong> <strong>PACKAGING</strong>, <strong>LTD</strong><br />
10095 INDUSTRIAL BLVD.<br />
CINCINNATI, OHIO<br />
Wed.Ê OctÊ 19thÊ atÊ 10:30Ê am<br />
Inspection:Ê Tues.Ê OctÊ 18,Ê 9-5Ê orÊ byÊ appt<br />
2002<br />
Directions to Plant: Plant is located 30 miles North of Cincinnati Airport. From<br />
Airport take Rte I-275 East 3.5 Miles to Rte I-75 North 24 Miles To Rte I-275 East 1<br />
Mile. Take 1st Exit #44, Mosteller Rd. Right 1 Mile to Left on Crescentville Rd.,<br />
.8 Mile to Right onto International Blvd. 2nd Road on Left<br />
ALPINE 80” 7 LAYER EXTRUSION LINE<br />
1998<br />
On-Site Terms: 25% deposit cash, ctfd ck or bank letter honoring payment w/<br />
unctfd cks. 13% Buyer’s Premium onsite. Other terms at sale.<br />
Webcast Terms: ALL on-line bidders MUST provide a 25% deposit up front with<br />
auctioneer’s office by Tuesday October 18th at Noon to be approved to bid.<br />
A 16% Buyer’s Premium will apply<br />
Proxy Bid: Auctioneer will accept proxy bids for those unable to attend this<br />
sale. Bids must be accompanied by a deposit of 25% of bid in certified check<br />
or bank letter honoring payment with uncertified checks.<br />
Important Notice: All items sold at this sale are sold without warranty or<br />
representation whatsoever, INCLUDING WITHOUT LIMITATION, any warranty or<br />
representation as to description, title or capacity. All items are sold as is where is,<br />
auctioneer expressly disclaims the implied warranties or merchantability and fitness<br />
for a particular purpose.<br />
To arrange inspection contact auctioneers office<br />
Register to bid: www.josephfinn.com<br />
ALPINE 80” 5 LAYER EXTRUSION LINE
TRIM RECLAIM<br />
(2) 2005 MACCHI Recotrim OP1610-1<br />
Trim Reclaim Twin Screw Extrusion<br />
Pelletizers w/Dryers, s/n 05059, 05035,<br />
90#/Hour<br />
FOREMOST HSFG1116 15 HP Trim<br />
Grinder w/Pull Rolls, s/n 39119;<br />
PROCESS CONTROL 15 HP Trim<br />
Grinder w/Blower<br />
MISC. EQUIP.<br />
(3) CRG LOGICS 3500# Bins, 7.5 HP<br />
Vacuum Pump, Filter, Control Panel<br />
CH 5KTA 60” Treater, 2 Side, Generator<br />
(New)<br />
AMPLAS 48” Driven Unwind w/Edge<br />
Guide Unit<br />
2006 CORE TECHNOLOGIES 9190 Core<br />
Cutter, s/n 12312, 3” & 6”<br />
Special Built Core Cutter, 6”<br />
(2) FOREMOST 10 HP Vacuum Pumps,<br />
CONAIR 10 HP Vacuum Pump<br />
QUICK DRAFT Blowers, Filters,<br />
BLOAPCO Blower, FIFE Edge Guides,<br />
PILLAR 64” Treater Box<br />
PUBLIC AUCTION SALE<br />
SLITTER<br />
1999 DUSENBERY 835L-3 64”<br />
Cantilever Duplex Slitter Rewinder,<br />
s/n 59556, AC<br />
Vector Drives, Guided Unwind, Amplas<br />
4-Head Slit Sealer, Quick Draft Blower<br />
Overhead Roll Handling System,<br />
(2) Electric Hoists, ¼ & 1 Ton Hoists<br />
MSI Challenger 2 10,000# Digital<br />
Hanging Scale<br />
TILT LOCK LS1-3 Roll Lift, s/n 11596<br />
SILOS<br />
(2) 1998 A.O. SMITH Welded Steel<br />
Silos, 14’x47’, 5810 Cu. Ft., s/n 80067,<br />
80068<br />
RAILROAD CAR<br />
4-Compartment, (2) 1138 Cu. Ft., (2)<br />
1487 Cu. Ft., 196,000 ID IMT, 67,000<br />
IT WT<br />
MAINT. EQUIP.<br />
JET Mill Drill, MILLER & LINCOLN<br />
Welders, Band Saws, Hyd. Press,<br />
Belt Grinders, Power & Hand Tools,<br />
Hardware, Supplies<br />
Auction & Appraisal Services<br />
If you have idle or surplus assets, a<br />
<strong>FLEXTECH</strong> <strong>PACKAGING</strong> surplus division, or an entire facility to<br />
10095 INDUSTRIAL BLVD. liquidate, talk to us first. Our certified<br />
appraisal staff will answer these<br />
CINCINNATI, OHIO<br />
questions for you. We provide prompt,<br />
Wed.Ê OctÊ 19thÊ accurate and confidential appraisals of<br />
StartingÊ atÊ 10:30Ê am your assets at Replacement, In-place,<br />
Fair Market, Orderly Liquidation and/or<br />
inspection:Ê Tues.Ê OctÊ 18,Ê 9-5Ê orÊ byÊ appt<br />
Auction Values<br />
Register to bid on-line<br />
DUSENBERY 835L-3 64” Slitter<br />
1 of 2 MACCHI Recotrim Systems<br />
CORE TECH 9190 Core Cutter<br />
1999<br />
2005<br />
2006<br />
NEW<br />
JOSEPH FINN CO., INC.<br />
CH 5KTA 60” 2 Side Treater<br />
2 Steel Silos 4 Compartment Railroad Car<br />
CRG Logic Bins, Pump, Control
LABORATORY<br />
2001 MOCON Ox-Tran 2/20 MJ Oxygen Permeability Tester, s/n 0101AG092<br />
1998 MOCON Ox-Tran 2/620 MT Oxygen Permeability Tester, s/n 1297BN011<br />
1998 MOCON Permatran 3/60 MN Water Vapor Permeability Tester, s/n<br />
1297BP008<br />
2005 THWING ALBERT EJA1750 Tensile Tester, s/n 52205<br />
2001 BYK GARDNER 4725 Haze Guard Plus Tester, s/n 984653<br />
(2) 1998 THWING ALBERT Friction Peel Testers, s/n 47780, 47450<br />
1998 MICROM HM310 Microtome, s/n 13089<br />
1998 CARL ZEISS Axioskop 20 Microscope, s/n 123850<br />
(2) DYNISCO/THELLER HT Heat Sealers, s/n 98237 (2000), 93156 (1998)<br />
1998 IMS GELBO 5000ES Flex Tester, s/n 13664<br />
DYNISCO/THELLER D Mini Tensile Tester; METTLER TOLEDO FP52HT Hot<br />
Stage; TECHNIDYNE BNL-3 Opacimeter; ELMENDORF 1600 Tear Tester;<br />
DYNISCO Drop Dart Tester; JDC Sample Cutters; Balance, Scales; BLUE M<br />
Oven; Lab Bath; BYK Micro Gloss; Micrometers; Lab Tables<br />
VIEW OF MOCON PERMEABILITY TESTERS<br />
CHILLERS<br />
1999 AEC PINN-3-90RQ Pinnacle Series 90 Ton Chiller, 6x15 Ton, Tank,<br />
Pumps, Filter, s/n 31G0226 (Rebuilt)<br />
1999 AEC PINN-3-90RG Pinnacle Series 90 Ton Chiller, 6x15 Ton, Tank,<br />
Pumps, Filter<br />
COMPRESSORS<br />
QUINCY QSF50ANA32B 50 HP Rotary Air Compressor, s/n QN049291<br />
ZEKS 250NCGA400 Air Dryer, s/n 241756; QUINCY 20 HP Tank-Mtd. Air<br />
Compressor, s/n 91870J, Quincy Q1FD Dryer; (2) Vertical Steel Air Tanks<br />
PLANT EQUIP.<br />
WULFTEC WIP150 Pallet Stretch Wrapper, s/n 1099-5100; METTLER TOLEDO<br />
Panther 10,000# Floor Scale, 48” x 48”; 360º Jib Crane, Hydraulic Pallet<br />
Jacks, Vacuums, Pallet Shelving, Ladders, Strap Trucks, Fans, Cabinets, Carts<br />
VIEW OF LABORATORY EQUIPMENT<br />
Auction & Appraisal Services<br />
If you have idle or surplus assets, a surplus division, or an entire facility to liquidate,<br />
talk to us first. Our certified appraisal staff will answer these questions for<br />
you. We provide prompt, accurate and confidential appraisals of your assets at<br />
Replacement, In-place, Fair Market, Orderly Liquidation and/or Auction Values<br />
1 OF 2 AEC 90 TON CHILLERS<br />
T-A Tensile Tester<br />
WULFTEC Wrapper<br />
QUINCY 50 HP ROTARY AIR COMPRESSOR
2002 ALPINE 80” 7 LAYER<br />
BLOWN FILM EXTRUSION LINE<br />
Custom Built 80” MDO will be offered separately<br />
2002 ALPINE 7-Layer, 80” Blown Film Extrusion Line, (2) 75mm, 30:1,<br />
Air Cooled Extruders, 125 HP DC Drives, (2) 65mm, 30:1,<br />
Air Cooled Extruders, 100 HP DC Drives, (3) 50mm, 30:1, Air Cooled<br />
Extruders, 60 HP DC Drives, All w/Hydraulic Screen Changers,<br />
400mm 7-LayerÊ AlpineÊIBC Die, Controls, Addex Dual Lip Air Ring,<br />
Automatic Gauge Control, Bubble Cage, Poly Cools & Blowers,<br />
Tower, 80” Oscillating Haul Off, Secondary Nip, (2) Pillar Treaters,<br />
Dual Side, Generator, Computerized Line Control, RheinholdÊ ASKII-200<br />
80” Robotic Controlled Face-to-Face Center Surface Winders, Auto<br />
Cut Forward & Reverse, 40” Diameter, Doffing Table, Shaft Extractors,<br />
(2) Trim Blowers, (7) Plast Control Gravimetric Blenders, Foremost<br />
ASR, Auto Loss in Weight Control, Custom Built 80” Machine<br />
Direction Orienter (MDO),Ê Siemens Control, (4) Web Paths, Budzar &<br />
Advantage Temperature Controls (Original<br />
Equipment Cost: 2002 Alpine Extrusion Line $2,900,000.00;<br />
2002 Custom Built MDO $750,000.00)
1998 ALPINE 80” 5 LAYER<br />
BLOWN FILM EXTRUSION LINE<br />
Black Clawson 80” MDO will be offered separately<br />
1998Ê ALPINE 5-Layer, 80” Blown Film Extrusion Line, (3)<br />
65mm, 30:1, Air Cooled Extruders, 100 HP Reliance DC<br />
Drives, (2) 50mm, 30:1, Air Cooled Extruders, 60 HP Reliance<br />
DC Drives, All w/Hydraulic Screen Changers, Alpine<br />
400mm 5-Layer IBC Die, Bubble Cage, Addex Dual Lip Air<br />
Ring, Automatic Gauge Control, Poly Cools, Blowers, 80”<br />
Oscillating Haul Off, Secondary Nip, (2) Pillar Treaters, Dual<br />
Side, (2) Enercon Generators, E&L Edge Guide, Computerized<br />
Line Control, 2007 Alpine 64” Back-to-Back Center<br />
Surface Winders, Siemens Control, Trim Blowers, (5) Foremost<br />
Gravimetric Blenders, Auto Weight in Loss Control,<br />
1998 Black Clawson 80” Machine Direction<br />
Orienter (MDO), 4 Web Paths, Control, Advantage<br />
Temperature Controls (Original Equipment Cost:<br />
1998 Alpine Extrusion Line $2,100,000.00; 2007 Alpine<br />
Winder $450,000.00; 1998 BlackÊ Clawson MDO<br />
$675,000.00)
2005 RULLI STANDARD 1800MM<br />
BLOWN FILM EXTRUSION LINE<br />
2005Ê RULLIÊ STANDARD 5-Layer, 1800mm Blown Film Extrusion<br />
Line, (2) 2.5”, 30:1, Air Cooled Extruders, 100 HP,<br />
AC VS Drives, (3) 50mm, 30:1, Air Cooled Extruders, 60<br />
HP, AC VS Drives, All w/Pneu. Screen Changers, 5-Layer,<br />
350mm IBC Die, Dual Lip Air Ring, Bubble Cages, Poly<br />
Cools, Blowers, Tower, 1800mm Oscillating Haul Off, E&L<br />
Edge Guide, Dual Sided Treater w/Generator, Enercon<br />
Bare Roll Treater on Winder, Secondary Nip, Rulli Standard<br />
1800mm Back-to-Back Center Surface Winders, Auto Cut,<br />
Trim Blowers, 36-Zone Control Panel, (5) CRG Gravimetric<br />
Blenders & Loaders, CRG 7.5 HP Vacuum Pump, Auto<br />
Weight in Loss Control (Original Equipment Cost: 2005<br />
RulliÊ Standard Extrusion Line $1,300,000.00)<br />
PUBLIC AUCTION SALE<br />
<strong>FLEXTECH</strong> <strong>PACKAGING</strong>, <strong>LTD</strong><br />
10095 INDUSTRIAL BLVD.<br />
CINCINNATI, OHIO<br />
Wed.Ê OctÊ 19th,Ê StartingÊ atÊ 10:30Ê am<br />
Inspection:Ê Tues.Ê OctÊ 18,Ê 9-5Ê orÊ byÊ appt<br />
To arrange inspection contact auctioneers office<br />
Register to bid: www.josephfinn.com