general catalogue
general catalogue
general catalogue
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
ACCESSORIES FOR<br />
HYDRAULIC COMPONENTS<br />
TK - EXTENDED FILLER PLUGS WITH BUILD-IN LABYRINTH OVERFLOW PROTECTION<br />
G = Fiber seal<br />
S = Breather hole<br />
plugs, breathers and dipsticks<br />
-Threaded extended plug with labyrinth vane located in its<br />
body; produced from thermoplastic material (Polyamide 66),<br />
max operating temp. 100° C (212 F)<br />
-These series of breather plugs reduce the possibility<br />
of oil overflow through the breather hole when strong oil<br />
movement is present, whilst the labyrinth is incorporated<br />
within the top of the plug, thus reducing the space needed at<br />
Code<br />
TK-14<br />
TK-38<br />
TK-12<br />
TK-16.15<br />
TK-18.15<br />
F<br />
G 1/4”<br />
G 3/8”<br />
G 1/2”<br />
M 16x1,5<br />
M 18x1,5<br />
Ch<br />
17<br />
19<br />
22<br />
19<br />
19<br />
the bottom side.<br />
-Breather hole diameter: 2,5 mm, located at the top side<br />
of plug<br />
-Asbestos-free, oil resistant glat seal<br />
-Hex bottom to allow tightening by wrench<br />
-Standard colour: black, encased text “OIL” on top<br />
PFP - EXTENDED RECEPTACLE FOR PRESS-FIT BREATHERS AND PLUGS<br />
PFF - EXTENDED RECEPTACLE FOR THREADED BREATHERS AND PLUGS<br />
D<br />
20<br />
22<br />
28<br />
22<br />
22<br />
d<br />
9<br />
12<br />
15<br />
12<br />
12<br />
h1<br />
55<br />
60<br />
65<br />
60<br />
60<br />
h2<br />
12<br />
12<br />
12<br />
12<br />
12<br />
G = Fiber seal<br />
-Extension casing with bottom male thread M16x1,5 and<br />
top female thread M16x1,5 (model PFF-16.15). Also available<br />
aith bottom thread 1/2” male, and top hole 18 mm diameter<br />
for press-.fit components (model PFP-12)<br />
-Extension PFF can be used in combination with our<br />
TCNS-TCAS-TMD-TMDA M16x1,5, extension PFP can be<br />
used combined with our TP-TPBS-ALS/18<br />
-Due to this extension, the breather hole in the press.fit<br />
breathers and/or dipsticks will be located at an increased<br />
height, helping to reduce overflow of oil through the breather<br />
hole.<br />
-The extention is manufactured out of thermoplastic<br />
material (Polyamide 66), the seal is asbestos-freee fibre<br />
Code<br />
PFF-16.15<br />
PFP-12<br />
F<br />
M16X1,5<br />
G 1/2”<br />
D<br />
18<br />
L<br />
50<br />
49<br />
Ch<br />
20<br />
24<br />
h2<br />
10<br />
12<br />
h1<br />
8<br />
10<br />
28