SV400 | Solids Pump

SV400 | Solids Pump
The Supavac SV400 Solids Pump was primarily designed for the
offshore oil and gas drilling industry. The pump is capable of
recovering up to 40m 3 /hr (52 yd 3 /Hr) of 2.6sg cuttings under
vacuum, and delivering the same via 100mm pipe some several
hundred meters. The Supavac SV400 Solids Pump can transfer
mud, sludge and slurry along with cuttings directly from the shale
shakers to skips or bulk tanks without the need to re-slurrify.
Compact and with a relatively small footprint, when configured
correctly the Supavac SV400 is capable of operating in line with the
high ROI's of today’s drilling.

The Supavac SV400 Solids Pump features:
• 100% air powered operation
• Intrinsically safe
• No internal workings
• Can be fixed or mobile system
• Generates 25”hg using 600cfm@85psi+
• One man operation
• Optional top load/gravity fed
• 400, 600, 750 and 900cfm Jet Packs available
Supavac SV400 Solids Pump applications include:
• Shaker to skip cuttings transfer
• Drill mud transfer
• Pit and sump cleaning
• Hazardous waste recovery
• Oil sludge residue transfer
• Vacuum cleaning of tank bottoms
• Bulk tank transfer, load and unload
The Supavac SV400 Solids Pump basic technical information:
• Height 158cm (5'3")
• Width 100cm (3'3")
• Length 186cm (6'2")
• Weight 1000kg (2'200lbs)
• Air consumption 600cfm@85psi+
• Suction inlet 100mm (4")
• Discharge outlet 100mm (4")
• Handles solids to 70mm (3")
Columbia Basin Hotsy
Office: (509) 547-2323
1225 S. 10 th Ave. FAX: (509) 547-3284
Pasco, WA 99301 CELL: (509) 430-2367
www.cbhotsy.com
Robert@cbhotsy.com