GAL - Geppert-Band GmbH
GAL - Geppert-Band GmbH
GAL - Geppert-Band GmbH
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Curved conveyor in aluminium<br />
AM - C<br />
with plastic modular chain<br />
The curved AM-C with plastic modular chain<br />
is the right solution to convey products<br />
through a curve without a change to their<br />
orientation on the belt. The model can be<br />
made to measurement for any angle<br />
between 15 and 180° that has to be bridged.<br />
It comes in a very slim design. Because of<br />
the small inner radius it can be used in<br />
confined spaces. The frame is only 18 mm<br />
wider than the chain itself. Also at the<br />
deflecting roller, the brackets only add 44<br />
mm of width.<br />
The whole height including the chain is only<br />
95 mm.<br />
In 6 to 8 days the AM-C can be produced in<br />
4differentchainwidthsbetween147and<br />
607 mm.<br />
Ist plastic modular chain can be easily<br />
cleaned and is especially hard wearing. Any<br />
broken or worn links can be exchanged<br />
individually, which allows rapid maintenance.<br />
Before and after the curved part itself, a straight part should always be planned in to guarantee<br />
asmoothrunningofthebelt.Theminimumlengthis500mmeach.Longerstraightdistances<br />
can of course also be included in the layout.<br />
With the wide range of GEPPERT<br />
accessories available, the AM-C can easily<br />
be adapted to almost any specific need. For<br />
further details of our accessories please<br />
refer to pages 69 to 75 and onwards of this<br />
catalogue.<br />
The equip the AM-C with a support system,<br />
we reccomend to use the two legged<br />
aluminium design as shown on this page. It<br />
is infinitely adjustable in height and should<br />
be used in a number corresponding with the<br />
total length of the system.<br />
65
Change language