EdM CAST RESIN TRANSFORMERS
EdM CAST RESIN TRANSFORMERS - Zucchini
EdM CAST RESIN TRANSFORMERS - Zucchini
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>EdM</strong>: a system under control<br />
Temperature and ventilation surveillance<br />
TEMPERATURE SURVEILLANCE TOOLS<br />
<strong>EdM</strong> gives you the possibility of combining<br />
all its transformers of any size with the best<br />
temperature detection tools now available on the<br />
market:<br />
- Thermal sensors - PT100: positioned by <strong>EdM</strong><br />
near the warmest area of the winding; they<br />
can be programmed according to the specific<br />
requirements of any installation.<br />
- PTC thermistors: positioned by <strong>EdM</strong> near the<br />
warmest area of the winding; their preset alarm<br />
threshold and trip threshold are chosen by the<br />
customer when the order is placed.<br />
The wiring of the connections used for the<br />
temperature sensors are protected and screened<br />
by a special metal plate conduit and are connected<br />
to a terminal board installed inside a strong<br />
metallic box.<br />
Furthermore, when combined with control<br />
sensors, <strong>EdM</strong> can supply the following, if required:<br />
- T154 Unit or MT200 Unit: equipment used<br />
for controlling the PT100 thermistors with<br />
temperature display, output relay for alarm,<br />
optional trip and control of the ventilation bars<br />
supplied as a detached part to be installed on the<br />
electric panel.<br />
VENTILATION ACCESSORIES<br />
If required, <strong>EdM</strong> can directly equip its own<br />
transformers at the factory with special ventilation<br />
bars.<br />
These special tangential fans are designed to<br />
allow temporary and limited increase of the power<br />
delivered by the transformer, up to +40% of the<br />
rated power.<br />
- VRT200 Unit: equipment for automatic activation<br />
and control of the fans.<br />
<strong>EdM</strong><br />
<strong>CAST</strong> <strong>RESIN</strong> <strong>TRANSFORMERS</strong><br />
- T119 Unit: equipment used for controlling the<br />
PTC thermistors with output relay for alarm,<br />
optional trip and control of the ventilation bars<br />
supplied for being installed on the electric panel.<br />
HIGH POWER GENERAL CATALOGUE<br />
113