Drinking Water Treatment - datasheet
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DRINKING WATER TREATMENT<br />
A<br />
B<br />
1 3<br />
2<br />
4 5<br />
6<br />
A. Pre-chlorination system is composed of:<br />
• Proportional dosing pump (DLX-VFT/M, DLX-MF/M) (1)<br />
• <strong>Water</strong> meter with reed pulse transmitter (2)<br />
• PE tank<br />
Injection point is placed before reservoir inlet. Chlorination is made proportionally to the flow rate present inside<br />
pipeline.<br />
B. Post-chlorination system is composed of:<br />
• Chlorine control panel (3) equipped with AG SELECT B1 controller, filtering system, Organic Free Chlorine<br />
probe (usually 0-2ppm), probe holder with proximity switch and flow regulation system.<br />
• ON/OFF dosing pump (DLX-MA/AD) or PROPORTIONAL dosing pump (DLX-CC/M)<br />
• PE tank<br />
<strong>Water</strong> is sampled after recirculating pump of the mixing system (5) and injection point is placed after sampling point.<br />
Post-chlorination system controls Chlorine level present inside the reservoir (4) and adjusts it according to setpoint<br />
required.<br />
Drained water from the measuring cell can be recycled into the reservoir if required by national norms.