COMSOL CONFERENCE
1LeX0E1
1LeX0E1
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Focus Session: Best Practices<br />
in Electromagnetic Simulation<br />
LOCATION<br />
Salon H<br />
Thursday October 8th<br />
2:45 pm - 4:15 pm<br />
SESSION CHAIR<br />
Magnus Olsson<br />
<strong>COMSOL</strong> AB<br />
20<br />
This discussion-oriented session<br />
addresses some common challenges in<br />
electromagnetic modeling and simulation.<br />
The introductory presentation will cover<br />
how to choose between a large number<br />
of available formulations in three separate<br />
modules including the AC/DC Module, RF<br />
Module, and Wave Optics Module. General<br />
misunderstandings of Maxwell’s equations<br />
that tend to surface regularly are also<br />
discussed. Finally, the future direction of the<br />
<strong>COMSOL</strong> product line for electromagnetic<br />
simulations will be presented.<br />
Best Practices in EM Simulation in<br />
<strong>COMSOL</strong> Multiphysics®<br />
M. Olsson<br />
<strong>COMSOL</strong> AB, Stockholm, Sweden<br />
Control the Poly-Dispersed<br />
Droplet Breakup Mode in a<br />
Droplet-based Microfluidic Device<br />
by External Electric Field<br />
Y. Li 1 , K. Nandakumar 1 , M. Jain 1<br />
1<br />
Cain Department of Chemical Engineering,<br />
Louisiana State University, Baton Rouge, LA, USA<br />
Simulating Plasmon Effects<br />
in Nano-Structured<br />
OLED Cathodes Using <strong>COMSOL</strong><br />
Multiphysics® Software<br />
L. Wang<br />
Konica Minolta Laboratory USA Inc.,<br />
San Mateo, CA, USA
Change language