General Fall & Winter Flyer 2015/2016

DELUXE ROUTER TABLE
KIT WITH CAST-IRON
TABLE TOP
40-200C
*
*
$1,499. 99
AUTHOR’S
40-125*
reg. $1,656. 00 $449. 99
Models 40-200C
& 40-125 chosen as :
reg. $538. 80
Deluxe router fence with 2 1/4” dust collection
outlet and adjustable scales (40-080).
24”x 32” cast-iron table top (40-075).
HEAVY-DUTY ROUTER LIFT
WITH 9 1/4” X 11 3/4”
ALUMINUM TOP PLATE
Stable 4 post/lift screw design
& chain drive lifting system
controlling all 4 corners
simultaneously.
Tubular steel stand with built-in casters,
on/off switch, and four adjustable
leveling feet (40-085).
WWW.GENERAL.CA
40-120
$129. 99
reg. $144. 00 $539.
2015/2016
by Fine Woodworking
2014 TOOL GUIDE
STOCK PUSHER
Dust collection kit (40-130). Under table steel dust enclosure with access door,
adjustable air vent, power cord grommet and 4” dust port with 2 1/4” branch inlet.
40-200MEP
$709. 99
reg. $798. 00
ROUTER TABLE KIT
WITH MDF TABLE
24” x 32” MDF table (40-049).
Tubular steel stand with built-in casters,
on/off switch, and four adjustable leveling feet
(40-085).
Deluxe router fence with 2 1/4” dust collection
outlet and adjustable scales (40-080).
9 1/4” x 11 3/4” phenolic router
plate (40-114).
FALL
WINTER
Prices are in effect from November 1 st , 2015 to April 30 th , 2016
CAST-IRON ROUTER TABLE
KIT FOR TABLE SAWS
Kit includes :
16” x 27” cast-iron table (40-070),
two adjustable-length steel support
legs (40-068), deluxe 27” router
fence (40-065) and 9 1/4” x
11 3/4” Phenolic router plate
(40-114).
DISTRIBUTED BY:
40-070EK
99
reg. $643. 20
We reserve the right to correct any typographical and pictorial errors without notice.

DELUXE HEAVY-DUTY
WOOD CUTTING
BANDSAW
3/8” blade included.
Safety foot brake stops blade and
motor.
Solid cast-iron table with
heavy-duty one-piece trunnion
and 0° to 45° right tilting action.
90-380 M1 (22”)
$5,038. 99
reg. $6,960. 00
Blade speed : 4590 lin. fpm
Motor : 5 HP, 220 V
Weight : 825 lbs (375 kg)
DELUXE 14” WOOD
CUTTING BANDSAW
3/8” blade included.
12” resaw capacity.
Safety foot brake stops blade and motor.
Blade speeds (2) : 2300 & 3250 lin. fpm
Motor : 1 1/2 HP, 110 V
Weight : 293 lbs (133 kg)
2
Upper and lower dual bakelite
block and bearing, deluxe
blade guide system.
(90-290 & 90-380)
90-170B M1
$2,029. 99
reg. $2,520. 00
Deluxe rip
fence system
Cast-iron wheels.
(90-170B)
90-140 M1 90-030 M1
$799. 99
reg. $1,080. 00 $319.
99
reg. $456. 00
Deluxe rip
fence system
Cast-iron wheels.
(90-290 & 90-380)
90-290 M1 (18”)
$3,999. 99
reg. $5,400. 00
Blade speeds (2) :
2820 & 3936 lin. fpm
Motor : 3 HP, 220 V
Weight : 605 lbs (275 kg)
14” WOOD
CUTTING BANDSAW
3/8” blade included.
Cast-iron frame & precisionbalanced
aluminum wheels with
replaceable rubber tires.
Safety lock-out switch with
removable key to prevent
unauthorized use.
Blade speeds (2):
1630 & 2730 lin. fpm
Motor : 1 HP, 120 V
Weight : 191 lbs (87 kg)
Multi-size dust port
fits 4”, 3”, or
2” hose.
10” WOOD
CUTTING
BANDSAW
Sturdy welded steel
frame & precision
balanced wheels with
replaceable tires.
Miter gauge with auxiliary
aluminum crosscut fence
included.
Cutting speed :
2920 lin. fpm
Motor : 1/3 HP, 120 V
Weight : 80 lbs (36 kg)

90-125 M1
$1,199. 99
reg. $1,620. 00
Deluxe rip
fence system
14” WOOD CUTTING BANDSAW
Deluxe dual-position rip fence system.
Sturdy welded steel frame & precision balanced
wheels with replaceable tires.
Safety lock-out switch with removable key to
prevent unauthorized use.
Extra-large 21 1/2” x 15 3/4” cast-iron table.
Blade speeds (2) : 1574 & 3280 lin. fpm
Motor : 1 HP, 120 V
Weight : 194 lbs (88 kg)
Upper and lower blade guard assembly helps
prevent accidental hand contact with the blade.
Dust collector table kit for direct dust-extraction
hook-up. Switch protection device to prevent unintentional
start-up.
Head tilts 38° (for EX-21 & EX-30) or 30° (for EX-16) left
and 45° right, tilting the blade, not the table keeping the
workpiece level for better control & more accurate cuts.
Easy access speed and tension controls.
14” WOOD
CUTTING BANDSAW
3/8” blade included.
Cast-iron frame & precisionbalanced
aluminum wheels
with replaceable rubber tires.
Rip fence & miter
gauge included.
Quick release blade
tension lever.
Blade speeds (2):
1800 & 3000 lin. fpm
Motor : 1 HP, 120/240 V
Weight : 224 lbs (102 kg)
90-120 M1
$699. 99
reg. $1,020. 00
EX-30K (30”)
$1,239. 99
reg. $1,758. 00
EX-21K (21”)
$1,079. 99
reg. $1,326. 00
Foot switch &
stand included.
Speed (variable) :
400 to 1550 strokes/min
Table surface :13 1/2” x 23 1/2”
Motor : 120 V, 1.3 A
Weight : 65 lbs (29.5 kg)
Foot switch
included with
EX-21K & EX-30K.
90-040 M1
$599. 99
reg. $828. 00
12” WOOD CUTTING
BANDSAW
Precision easy-adjust blade guide
blocks included.
Extra-large 21 1/2” x 15 3/4”
cast-iron table.
Deluxe dual-position rip fence system.
Cutting speeds : 1443 & 3150 lin. fpm
Motor : 2/3 HP, 120 V
Weight : 165 lbs (75 kg)
Multi-size dust port
fits 4”, 3”, or
2” hose.
Foot switch & stand included.
Speed (variable) : 400 to 1550 strokes/min
Table surface : 14” x 32 1/2”
Motor : 120 V, 1.3 A
Weight : 97 lbs (44 kg)
SCROLL SAWS
EX-16 (16”)
$699. 99
reg. $898. 80
Speed (variable) :
400 to 1400 strokes/min
Table surface : 12” x 18 1/2”
Motor : 120 V, 1.3 A
Weight : 54 lbs (24.5 kg)
3

GRINDERS
8” LOW SPEED
BENCH GRINDER
Double sealed ball-bearing
construction.
Easy-adjust cast tool rests.
Arbor speed : 1725 rpm
Motor : 1/2 HP, 110 V
Weight : 42 lbs (19 kg)
15-625 M1
$129. 99
reg. $168. 00
15-825 M1
$219. 99
reg. $288. 00
6” LOW SPEED BENCH GRINDER
Double sealed ball-bearing construction.
Adjustable aluminum tool rests.
Arbor speed : 1725 rpm
Motor : 1/3 HP, 110 V
Weight : 21 lbs (9.6 kg)
6” VARIABLE SPEED
BENCH GRINDER
Variable speed for
grinding or sharpening.
Double sealed ball-bearing
construction.
Arbor speed (variable) :
2000 to 3450 rpm
Motor : 110 V
Weight : 28.5 lbs (13 kg)
15-660 M1
$179. 99
reg. $240. 00
8” HEAVY-DUTY
4
BENCH GRINDER
One-piece, quick adjusting spark guards.
15-870 M1 Permanently lubricated sealed bearings.
Arbor speed : 3450 rpm
Motor : 1 HP, 110 V
STAND FOR
reg. $330. 00 Weoght : 59 lbs (27 kg) 6”, 8” AND 10”
BENCH GRINDERS
15-710 (34”)
$129. 99
$259. 99
15-700 (35 3/4”)
$119. 99
reg. $150. 00
reg. $168. 00
HEAVY-DUTY
15-005S M1
OSCILLATING
$1,299. 99
reg. $1,740. 00
15-010 M1
NON-OSCILLATING
$2,349. 99
Weight :
reg. $2,940. 00
462 lbs
(210 kg)
6” X 108” VERTICAL
EDGE BELT SANDER
Same features as model 15-010S
without oscillating feature.
15-010S M1
OSCILLATING
$2,549. 99
reg. $3,360. 00
6” X 108” VERTICAL
EDGE BELT SANDER
Tables can be adjusted up or down for
full belt use.
Graphite backing reduces belt friction for longer belt life.
Dynamically balanced 7” rubber drive roller and
crowned 3” idler roller to ensure solid belt tracking.
Belt speed: 3150 lin. fpm
Motor : 2 HP, 220 V
Weight : 453 lbs (206 kg)
Weight :
266 lbs (121 kg)
6” X 89” EDGE
BELT SANDER
Sanding belt operates at any angle
from horizontal to vertical.
Adjustable, removable front table fence.
Graphite backing reduces friction for longer
belt life.
Belt speed: 3900 lin. fpm
Motor : 1 1/2 HP, 110/220 V
Weight : 277 lbs (126 kg)
15-005 M1
NON-OSCILLATING
$1,199. 99
reg. $1,620. 00
6” X 89” VERTICAL
EDGE BELT SANDER
Same features as model 15-005S
without oscillating feature.

OPTIONAL 3” RUBBER
DRUM & SPINDLE
For 15-220 only
15-221 15-222
$79. 99 $19. 99
reg. $102. 00 reg. $24. 00
OSCILLATING
SPINDLE
SANDER
(Bench-top model)
Precision-ground
cast-iron table.
Five interchangeable spindle
assemblies: 1/4”, 1/2”,
5/8”, 1 1/2”, 2” diameter.
29 oscillations per minute.
Spindle speed : 1720 rpm
Motor : 1/2 HP, 110 V
Weight : 81 lbs (37 kg)
OPTIONAL 3”
TABLE INSERT
For 15-220 only
24” HORIZONTAL DOUBLE DRUM SANDER
Two 5” diameter aluminum drums.
High quality conveyor belt for long service life.
Magnetic safety switch.
Feeding speed (variable) : 3 to 20 fpm
Motor (main) : 3 HP, 220 V
Motor (conveyor) : 1/8 HP
Weight : 418 lbs (190 kg)
Built-in dust
collector
15-220 M1
$579. 99
reg. $720. 00
15-250 M1
$2,499. 99
reg. $3,360. 00
15-020 M1
$1,499. 99
reg. $2,280. 00
OSCILLATING SPINDLE
SANDER (Floor model)
Heavy-duty oil bath gearbox.
Ten interchangeable spindles
including 1/4”, 3/8”, 1/2”, 5/8”,
3/4”, 1”, 1 1/2”, 2”, 3” & 4”.
75 oscillations per minute.
Spindle speed : 1725 rpm
Motor : 1 HP, 110 V
Weight : 319 lbs (145 kg)
SANDERS
15-035DC M1
$1,599. 99
reg. $2,160. 00
6” X 48” BELT & 12” DISC SANDER
Steel half-disc front guard.
Sanding belt operates at any angle from horizontal to vertical.
Two large surface, cast-iron, tilting tables.
Quick-change belt tension lever for faster belt changes.
Precision metal miter gauge included.
Belt speed : 2250 lin. fpm
Disc speed : 1750 rpm
Motor : 1 1/2 HP, 110/220 V
Weight : 365 lbs (166 kg)
5

75-550 M1
$769. 99
reg. $1,020. 00 $1,199.
31 7/8” RADIAL ARM
DRILL PRESS
5/8” chuck with key, laser
pointer & see-through chuck
guard included.
3 1/8” spindle travel.
Table swivel 360°.
Forced opening line interrupter
switch, requires machine restart
in case of power failure or
circuit interruption.
Table extension provides
additional support.
Spindle speeds (9) :
295 to 3580 rpm
Motor : 1/2 HP, 110 V
Weight : 165 lbs (75 kg)
Line interrupter switch
Line interrupter
switch
75-010 M1
$379. 99
reg. $516. 00
Digital
speed display
12” VARIABLE SPEED
DRILL PRESS
(Bench-top model)
5/8” chuck with key & convenient onboard
chuck key holder.
Sturdy design with cast-iron
head, base, and table.
Simple hand lever controlled mechanical
variable speed from 500 to 3000 rpm.
Easy to use see-through flip-up chuck
guard included.
Motor : 1/3 HP, 120 V
Weight : 75 lbs (34 kg)
Line interrupter
switch
Digital
speed
display
75-510 M1
6
99
reg. $1,440. 00
20” VARIABLE SPEED
DRILL PRESS
3/4” chuck with key.
Adjustable spindle tension return
spring.
Sturdy design with cast-iron head,
base, and table.
Simple hand lever controlled
mechanical variable speed from
280 to 2100 rpm.
Easy to use see-through flip-up
chuck guard included.
Motor : 1 HP industrial-quality, 120 V
Weight : 284 lbs (129 kg)
75-200RC M1
$659. 99
reg. $900. 00
17” DRILL PRESS
5/8” chuck with key, laser
pointer & see-through chuck
guard included.
Rotating, 45° tilting, crankoperated
worktable with quick
release clamp.
Forced opening line interrupter
switch, requires machine restart
in case of power failure or
circuit interruption.
Spindle speeds (12) :
340 to 2800 rpm
Motor : 3/4 HP, 110 V
Weight : 200 lbs (91 kg)
75-260 M1 75-500 M1
$899. 99
reg. $1,260. 00
17” EXTENDED
STROKE DRILL PRESS
3/4” chuck with key, laser pointer &
see-through chuck guard included.
Extra long 6” quill stroke drills deeper
than most drill presses.
Large front mounted paddle style stop
switch with lock-out safety feature to
prevent unwanted or unintentional
start-up.
Spindle speeds (12) : 255 to 2750 rpm
Motor : 1 HP, 110V
Weight : 229 lbs (104 kg)
$1,159. 99
reg. $1,620. 00
22” DRILL PRESS
3/4” chuck with key, laser pointer &
see-through swing-away chuck guard
with safety Interlock – shuts off
automatically when opened.
Large front mounted paddle style stop
switch with lock-out safety feature to
prevent unintentional start-up.
Spindle speeds (12): 120 to 2270 rpm
Motor : 1 HP, 110 V
Weight : 372 lbs (169 kg)
Line interrupter switch

Line interrupter
switch
75-030 M1
(Bench-top model)
$419. 99
reg. $576. 00
DRILL PRESSES
75-150 M1
(Floor model)
$459. 99
reg. $600. 00
75-155 M1 75-165 M1
$549. 99
reg. $690. 00 $679.
Digital speed
display
14” DRILL PRESSES
5/8” chuck with key & convenient
onboard chuck key holder.
Rotating, 45° tilting, crank-operated
worktable with quick release clamp.
Forced opening line interrupter switch,
requires machine restart in case of
power failure or circuit interruption.
Built-in lamp illuminates the drilling
area (bulb not included).
Spindle speeds (12): 280 to 3000 rpm
Motor : 1/2 HP, 110 V
Weight : 105 lbs (48 kg) - 75-030 /
121 lbs (55 kg) - 75-150
99
reg. $840. 00
Digital speed
display
Digital
speed
display
75-710 M1
$1,899. 99
reg. $2,280. 00
17” ELECTRONIC VARIABLE
SPEED DRILL PRESS
5/8” chuck with key.
Electronic inverter variable control
adjusts spindle speed from
120 to 3200 rpm.
Sturdy design with cast-iron head,
base, and table.
Easy to use see-through flip-up
chuck guard and built-in laser
pointer included.
Motor : 1 HP industrialquality,
120 V.
Weight : 161 lbs (73 kg).
Line interrupter
switch
15” VARIABLE SPEED
DRILL PRESS
5/8” chuck with key.
Adjustable spindle tension
return spring.
Sturdy design with cast-iron
head, base, and table.
Spindle speed (variable) :
280 to 2100 rpm
Motor : 1/2 HP, 120 V
Weight : 136 lbs (62 kg)
Line interrupter
switch
17” VARIABLE SPEED
DRILL PRESS
5/8” chuck with key.
Adjustable spindle tension
return spring.
Sturdy design with cast-iron
head, base, and table.
Simple hand lever controlled
mechanical variable speed
from 280 to 2100 rpm.
Easy to use see-through flip-up
chuck guard included.
Built-in laser pointer.
Motor : 3/4 HP
industrial-quality, 120 V
Weight : 161 lbs (73 kg)
75-440 M1
$2,399. 99
reg. $2,820. 00
13 SPINDLE BORING MACHINE
Fully adjustable fence system with easy to read scales in
both inches and metric.
Heavy-duty cast-iron construction, machined with precision.
Open base steel stand included.
Adjustable depth stop control.
Spindle speed : 3450 rpm
Motor : 1/2 HP, 110 V
7
Weight : 214 lbs (97 kg)

METALWORKING
MACHINERY
METAL CUTTING BANDSAWS
Automatic shut-off.
Chip brush and safety guard included.
Adjustable hydraulic down feed control.
Blade speeds (4) : 86, 132, 178 & 260 fpm
Motor : 1 HP, 120/240 V
Weight : 330 lbs (150 kg)
7” X 12”
90-725 M1
$2,099. 99
reg. $2,700. 00
Magnetic
switch
7” X 12” HORIZONTAL
METAL CUTTING BANDSAW
Steel stand and heavy-duty cast-iron
frame with built-in oil recovery tray.
Versatile metal cutting bandsaw
with vertical raising head,
horizontal cut and a removable
work table.
Blade speeds (3) :
85, 145 & 180 fpm
Motor : 1 HP, 120/240 V
Weight : 330 lbs (150 kg)
8
90-700 M1
$1,899. 99
reg. $2,400. 00
7” X 10”
90-730 M1
$1,699. 99
reg. $2,160. 00
8” X 12” HORIZONTAL
METAL CUTTING BANDSAW
Horizontal or vertical cutting.
Automatic shut-off at the end
of cutting cycle.
Sturdy steel stand, heavy-duty
cast-iron frame and a built-in oil
recovery tray.
Adjustable hydraulic down feed control.
Coolant system with built-in
tank and pump.
Blade speeds :
78, 118, 160 & 232 fpm
Motor : 1 HP, 120/240 V
Weight : 308 lbs (140 kg)
90-780 M1
$1,959. 99
reg. $2,520. 00
7” X 10” SWIVEL HEAD
METAL CUTTING BANDSAW
Head swivels 0-45º on heavy-duty cast-iron slides.
Coolant system with built-in tank and pump.
Adjustable hydraulic down feed control.
Blade speeds : 73, 110, 150, 217 fpm
Motor : 1 HP, 240 V
Weight : 462 lbs (210 kg)
90-740 M1
$2,599. 99
reg. $3,480. 00 $3,499.
9” X 16” HORIZONTAL
METAL CUTTING BANDSAW
Automatic shut-off at the
end of cutting cycle.
One-piece heavy-duty
thick steel upper frame.
Adjustable hydraulic
down feed control.
Coolant system with
built-in tank and pump.
Blade speeds :
82, 132, 170 & 235 fpm
Motorr : 1/2 HP, 240 V
Weight : 543 lbs (247 kg)
90-790 M1
99
reg. $4,800. 00

OPTIONAL HI-SPEED STEEL BLADES
Limited
quantities
60-255
60-355
12” X 180T 14” X 120T
(for 60-350)
$329. 99
reg. $480. 00 reg. $540. 00
(for 60-250)
$299. 99
COLD CUT SAWS
Mitering capabilities with stops at 90°,
45° left and 45° right.
Coolant pump system with high
volume tank.
Magnetic switch with overload protection.
Specially designed water channel
for better cooling effect.
Blade not included.
60-250 M1
$2,599. 99
reg. $3,480. 00
Limited
quantities
60-350 M1
$4,999. 99
reg. $6,360. 00
14” VARIABLE SPEED
Spindle speed (variable) :
24 to 120 rpm
Motor : 3 HP, 220 V
weight : 550 lbs (250 kg)
12” SLOW SPEED
Spindle speed : 52 rpm
Motor : 2 1/2 HP, 220 V
Weight : 418 lbs (190 kg)
25-365 M1
$6,599. 99
reg. $8,040. 00
Limited
quantities
25-355 M1
$4,799. 99
reg. $6,120. 00
Limited
quantities
11” X 26” VARIABLE SPEED
METAL LATHE WITH STAND
Full length lead screw cover / guard for operator safety.
Steady and follow rest included.
Digital speed display.
Distance between centers : 26” (660 mm)
Spindle speeds (variable) : 50 to 2150 rpm
Motor : 2 HP, 220 V
Weight : 605 lbs (275 kg)
10” X 21 5/8” VARIABLE SPEED
METAL LATHE WITH STAND
Pulley case and chuck guard both equipped with auto shut-off safety switch.
Steady and follow rest included.
Digital speed display.
Distance between centers : 21 5/8” (550 mm)
Spindle speeds (variable) : 100 to 2000 rpm
Motor : 1 1/2 HP, 220 V
Weight : 462 lbs (210 kg)
10-950 M1
$1,299. 99
reg. $1,740. 00
METAL DUST COLLECTOR
Non-sparking housing with easy-to-clean collection
drawers inside the cabinet.
High static pressure output for quiet and effective
dust collection.
Superior 3-stage 5 / 1 micron filtration system includes;
pleated, carbon, and stainless steel filters.
Airflow capacity : 755 cfm
Motor : 1 1/2 HP, 240 V, 3450 rpm
Weight : 183 lbs (83 kg)
9

36” EXTENSION TABLE &
SUPPORT LEGS INCLUDED
10” CABINET SAW
Left tilt
50-275RLK M1
$2,599. 99
reg. $3,180. 00
Arbor speed : 4000 rpm
Motor : 3 HP, 230 V
Weight : 371 lbs (168 kg)
Aluminum fence
system with 50” rails
Powerful 3 HP motor with multi-groove V-belt drive for
longer belt life and more efficient transfer of power.
Combination riving style splitter and see-through blade
guard with anti-kickback pawls, and a second European
style riving knife also included.
Large precision-ground 44” x 27” cast-iron
table with two extension wings.
50-SLT40P M1
$1,499. 99
reg. $1,800. 00
50-SLT60P M1
$1,799. 99
reg. $2,160. 00
FREE
Hold down clamp
(#50-EXHDC) with the
purchase of 50-SLT40P
or 50-SLT60P
SLIDING TABLES
Fits virtually all 10” to
14” table saws.
Easy to adjust, extruded
aluminum miter fence for
accurate miters from 0° to 45°.
Sliding quick mount bracket for
added cutting capacity. Cut up
to 49” * (50-SLT40P) or 72” *
(50-SLT60P) with the crosscut
fence positioned at the rear.
Crosscut or miter up to 28” *
(50-SLT40P) or 49” * (50-SLT60P)
with the fence at the front of the
table.
* Depending on the positioning of the
main mounting bracket on your saw.
40 TOOTH - 10”
COMBINATION
BLADE
55-040
$13. 99
reg. $48. 00
10” OVERARM BLADE COVER
SYSTEM WITH DUST
COLLECTION CAPABILITY
50-EXBC10
$459. 99
reg. $660. 00
50-EB3
$143. 99
reg. $252. 00
EXCALIBUR MITER
GUIDE (Canada only)
10
OUTRIGGER
SLIDER
INCLUDED
(#50-565A)
See-through blade
guard with
splitter
Dust collection
from cabinet
and blade
50-560A M1
$7,699. 99
reg. $9,000. 00
10” SCORING SAW WITH BUILT-IN SLIDING TABLE - Right tilt
Can be used as a regular saw, but includes a built-in sliding table for effortless crosscuts & a separate
scoring blade for chip-free cuts in melamine & laminates.
Anodized European style sliding table.
Separate safety lock out switch for scoring motor.
Precision built rip fence system with 50” guide rails for maximum rip capacity.
Arbor speed : (main) 4200 rpm / (scoring) 8000 rpm
Motor : (main) 3 HP, 220 V / (scoring) : 1/2 HP
Weight : 656 lbs (298 kg)
50-200R M1
$1,499. 99
reg. $2,040. 00
10” – 2 HP CABINET SAW
Left tilt
Combination riving style splitter
and see through blade guard with
anti-kickback pawls, & a second
European style riving knife
also included.
Large precision-ground 44” x 27”
cast-iron table with two
extension wings.
Ruggedly built saw carriage
with solid cast-iron cabinet
mounted trunnions.
Equipped with a sturdy,
easy to adjust, T-fence design
rip fence system.
Arbor speed : 4000 rpm
Motor : 2 HP, 115/230 V
Weight : 321 lbs (146 kg)

50-030
$229. 99
reg. $288. 00
MOBILE BASE FOR
TABLE SAWS WITH
EXTENSION TABLE
& LEGS
900 lb
capacity
50-270KDL M1
$2,999. 99
reg. $4,200. 00
50-755 M1 (12”)
$3,299. 99
reg. $5,160. 00
Maximum rip capacity :
26 3/8” (670 mm)
Motor : 2 HP, 220 V
Weight : 396 lbs (180 kg)
RADIAL ARM SAWS
Powerful 220V single phase motor.
50-760 M1 (16”)
$4,999. 99
reg. $8,388. 00
Maximum rip capacity :
38” (965 mm)
Motor : 3 HP, 220 V
Weight : 572 lbs (260 kg)
Cast-iron frame, heavy steel column, and sturdy easy to assemble all-steel stand.
Tilting pivoting head allows for crosscuts, bevels, miters and rip cutting.
10” SAWS
Left tilt
Heavy-duty, precision cast-iron, ribbed
table with miter gauge t-slots.
Includes 30” Excalibur aluminum
T-fence rip fence system.
Arbor driven by a two step belt,
ensuring straightness and accuracy
when the blade is tilted.
Combination riving style splitter and see
through blade guard with anti-kickback
pawls, and a second European style riving
knife also included.
Arbor speed : 3450 rpm
Motor : 2 HP, 120/240V
Aluminum T-fence
Arbor speed : 4300 rpm
Motor : 3 HP, 220 V
Weight : 524 lbs (238 kg)
Deluxe sliding
rip fence system
with 50” rails
10” CABINET SAW
Left tilt
Combination riving style splitter and seethrough
blade guard with anti-kickback
pawls, and a second European style riving
knife also included.
Magnetic 2-step safety switch to prevent
unintentional start-up is equipped with an
extra-large easy access stop panel and a
lock-out key.
Extra large precision-ground 42” x 29”
cast-iron table including two 11” full
cast-iron extension wings.
TABLE SAWS
CONTRACTOR SAW
Weight : 217 lbs (98.5 kg)
50-090RC M1
$1,299. 99
reg. $1,800. 00
JOB SITE SAW
Weight : 233 lbs (106 kg)
50-090RK M1
$1,499. 99
reg. $2,100. 00
11

15” X 20” CNC
CARVING MACHINE
Pendant style hand-held controller.
Easy to learn i-Picture
programming software. Large
user-friendly control panel with LCD
display, keypad and USB 2.0 port for
easy file transfers. Positional accuracy
up to 0.001” & variable cutting speeds
up to 118” per minute. Aluminum table
with integrated hold down clamps. Tool
kit with starter cutting tools included. No
external operating PC required. Unlimited
and ongoing technical support.
Weight: 126 lbs (57 kg)
40-915X M1
$5,899. 99
reg. $6,300. 00
14” X 17” “MAXI-LATHE VF”
WOOD LATHE (VARIABLE SPEED)
Quick lock control levers easily position tool-rest.
Stable cast-iron frame, head and tailstock.
Distance between centers : 17” (432 mm)
Spindle speed (variable): 200 to 3500 rpm
Motor : 1 HP
Weight : 93 lbs (42.5 kg)
25-650ABC M1
$2,999. 99
reg. $3,720. 00
NEW
16” X 43” ELECTRONIC VARIABLE
SPEED WOOD TURNING LATHE
Specifically designed and built for professionals
who want superior performance.
Headstock pivots 360° with positive stops
at 45°, 90°, 135°, 180° and 270° for
outboard turning.
Quiet, highly efficient, low power
consumption motor.
Movable emergency switch can be
placed to suit the operator.
Spindle speed (variable) :
45 to 1000, 85 to 2000, 150 à 3750 rpm
Distance between centers : 43” (1092 mm)
Motor : 2 HP
Weight : 633 lbs (288 kg)
STEEL SUPPORT STAND FOR MAXI-LATHE (25-195N)
& BED EXTENSION (25-196)
25-114A M1
$799. 99
reg. $1,080. 00
Available: December 2015
12” X 17”
“MAXI-LATHE VS+”
WOOD LATHE
Headstock pivots 360° with
180° positive stop for outboard
turning.
Digital spindle speed display.
25-205
12
25-200 M1
$1,099. 99
$249. 99
reg. $318. 00
reg. $1440. 00
32” BED EXTENSION
(for max. distance of 49” between centers)
For 25-200 M1 only
12” tool rest with sturdy 1” diameter support post.
Distance between centers : 17 5/16” (440 mm)
Spindle speed (variable) :
300 to 900, 600 to 1800 & 1200 to 3600 rpm
Motor : 3/4 HP, 110 V
Weight : 146 lbs (66.5 kg)
WOOD LATHES
25-195N
$229. 99
reg. $300. 00
OPTIONAL DUST
COLLECTION ADAPTER KIT
OPTIONAL
STAND
OPTIONAL SAFETY
ENCLOSURE
40-914 40-905
$239. 99
reg. $294. 00
$309. 99
reg. $384. 00
40-919X
$1,449. 99
reg. $1,650. 00
25-196
$199. 99
reg. $240. 00
GUARD FOR WOOD LATHE
Fits most wood lathes.
Does not interfere with
normal lathe use.
25-160
$329. 99
reg. $402. 00

SHAPERS
40-450 M1
$6,499. 99
reg. $8,040. 00 $1,999.
30-360HC M1
$7,599. 99
reg. $10,440. 00
20” SINGLE SURFACE PLANER
WITH “MAGNUM” HELICAL HEAD
2 feed speeds : 22 & 28 fpm.
Anti-kickback fingers at the front of the
infeed roller to ensure maximum operator
safety.
Built-in table rollers reduce friction.
Equipped with a sectional infeed roller
and a rubber outfeed roller.
Cutter head speed : 4500 rpm
Motor : 7 1/2 HP, 220 V
Weight : 1392 lbs (633 kg)
1 1/4” HEAVY-DUTY
PRODUCTION SHAPER
5 speeds with reverse.
Electric brake system
for quick spindle stops.
Heavy-duty fence system
includes a cutter guard and
a built-in 4” dust outlet.
Two emergency stop buttons.
Spindle speeds : 3000, 4000,
6000, 8000 & 10,000 rpm
Motor : 5 HP, 220 V
Weight : 968 lbs (440 kg)
30-060HC M1
$829. 99
reg. $1,080. 00
40-350 M1
$4,099. 99
reg. $5,400. 00
13” HEAVY-DUTY BENCH-TOP PLANER
WITH HELICAL CUTTER HEAD
Helical head with 26 reversible two-sided
carbide inserts.
Powerful 15 A motor with thermal overload protection.
Front and rear fold-down extension tables
for smooth easy stock feeding.
Cutter head speed : 10,000 rpm
Motor : 120 V, 15 A
Weight : 84 lbs (38 kg)
360H
4 rows, total
of 58 inserts
30-115 M1
$2,499. 99
reg. $3,120. 00
30-300 M1
1 1/4” SPINDLE 4-SPEED
PRODUCTION SHAPER
4 spindle speeds with reverse.
Independently adjustable
left and right industrial duty
fences with precision fine-tune
adjustment dials.
Large cutter guard with
window, spring hold downs
and built-in 4” dust outlet.
Spindle speeds : 4000, 6000,
8000 & 10,000 rpm
Motor : 5 HP, 220 V
Weight : 741 lbs (337 kg)
15” SINGLE SURFACE PLANER
2 feed speeds : 16 & 20 fpm.
Magnetic 2-step safety switch to
prevent unintentional start-up is
equipped with extra-large stop panel
and a lock-out key.
Built-in mobile base.
Cutter head speed : 5000 rpm
Motor : 3 HP, 240 V
Weight : 462 lbs (210 kg)
$3,999. 99
reg. $5,400. 00
20” SINGLE
SURFACE PLANER
2 feed speeds : 16 & 20 fpm.
Large cast-iron extension wings.
Magnetic safety switch.
Built-in mobile base with one-step
lock-pedal.
Cutter head speed : 5000 rpm
Motor : 5 HP, 220 V
Weight : 860 lbs (390 kg)
PLANERS
40-250 M1
99
reg. $2,580. 00
3/4” SPINDLE SHAPER
Fence system / cutter head
guard includes a cutter
guard, spring hold-downs
and a built-in 4” dust outlet.
Magnetic 2-step safety
switch equipped with an
extra-large easy access stop
panel and a lock-out key.
Independent left and right
fences feature precision
micro-adjustment.
Spindle speeds (2) :
8000 & 10 000 rpm
Motor : 3 HP, 220 V
Weight : 326 lbs (148 kg)
30-115HC M1
$3,599. 99
reg. $4,800. 00
15” SINGLE SURFACE PLANER
WITH «MAGNUM» HELICAL HEAD
Sames features as model 30-115 M1
+ «Magnum» helical head, #125H
(4 rows, total of 42 inserts).
30-300HC M1
$5,399. 99
reg. $7,560. 00
20” SINGLE SURFACE PLANER
WITH «MAGNUM» HELICAL HEAD
Sames features as model 30-300 M1
+ «Magnum» helical head, #30000H
(4 rows, total of 58 inserts).
Weight :
860 lbs (390 kg)
13

10-805CF M1
$1,599. 99
reg. $1,920. 00
1 1/2 HP PORTABLE
2 STAGE DUST COLLECTOR
30 gallon chip
collection drum included.
Equipped with an ultra efficient
1 micron canister filter with total
surface area of 40.3 square feet.
Remote control for convenient
operation from virtually
anywhere in the shop.
Special design quick-remove
drum lid handle mechanism for
fast, tool-free drum cleaning.
Airflow capacity : 778 cfm*
Sound rating : 84 dB
Motor : 1 1/2 HP, 110 V
Weight : 156 lbs (71 kg)
Remote
controller
included
3 HP DUST COLLECTORS
Heavy-duty motor design with a
continuous duty rating for industrial
applications.
Heavy-duty collection bags made
from extra thick, transparent,
recyclable plastic.
Airflow capacity : 2280 cfm*
Sound rating : 80 to 95 dB
Motor : 3 HP, 220 V
10-210 M1
$1,099. 99
reg. $1,530. 00
Equipped with 2 micron filter bag.
Weight : 165 lbs (75 kg)
1 1/2 HP DUST COLLECTORS
Totally enclosed, fan cooled, permanently
lubricated motor. Designed for industrial
applications with a continuous duty rating.
Re-usable clear plastic collector bag for
improved dust collection efficiency.
Airflow capacity : 1250 cfm*
Sound rating : 80 to 85 dB
Motor : 1 1/2 HP, 110/220 V
10-210CF M1
10-105 M1
$589. 99
reg. $780. 00 $899.
Equipped with 2 micron filter bag.
Weight : 106 lbs (48 kg)
2 HP DUST COLLECTORS
Equipped with totally enclosed, fan cooled,
permanently lubricated motor.
Heavy-duty collection bag made from
extra thick, transparent, recyclable plastic.
Airflow capacity : 1550 cfm*
Sound rating : 80 to 90 dB
Moteur : 2 HP, 220 V
10-110 M1
$749. 99
reg. $984. 00
Equipped with 2 micron filter bag.
Weight : 132 lbs (60 kg)
$1,399. 99
reg. $2,310. 00
Equipped with
1 micron canister filters .
Weight : 222 lbs (101 kg)
10-600CI M1
$549. 99
reg. $750. 00
Airflow capacity (3) :
700, 900 & 1250 cfm*
Sound rating : 64 dB
Motor : 1⁄3 HP, 110 V
Weight : 86 lbs (39 kg))
10-105CF M1
10-110CF M1
14
99
reg. $1,140. 00
Equipped with
1 micron canister filter.
Weight : 130 lbs (59 kg)
$999. 99
reg. $1,380. 00
Equipped with
1 micron canister filter.
Weight : 141 lbs (64 kg)
“SUPER TURBO” AIR CLEANING SYSTEM
Superior two stage filtration system includes a disposable, pleated outer
filter and a three pocket inner filter.
Five pre-programmed timer settings.

10-030CF M1
$499. 99
reg. $690. 00
1 HP DUST
COLLECTOR
Equipped with high
efficiency 1 micron
canister filter.
Re-usable clear
plastic collector bag.
Airflow capacity :
506 cfm*
Sound rating : 80 to 85 dB
Motor : 1 HP, 110 V
weight : 67 lbs (31 kg)
1 HP DUST COLLECTOR
Washable with 2 micron filter bag.
Re-usable clear plastic collector bag.
Airflow capacity : 700 cfm*
Sound rating : 75 to 80 dB
Motor : 1 HP, 110 V
Weight : 55 lbs (25 kg)
10-005 M1
$389. 99
reg. $526. 80
10-200
$109. 99
reg. $214. 80
10-100 - Includes:
(1) 4” x 10’ polyethylene
flexible hose.
(2) 4” wire bail hose clamps.
DUST COLLECTOR
ACCESSORY KIT FOR
ONE (10-100) OR TWO
MACHINE (10-200) HOOK-UP
10-100
$54. 99
reg. $94. 80
10-200 - Includes:
(2) 4” x 10’ polyethylene
flexible hose.
(10) 4” wire bail hose clamps.
(1) 4” universal dust (1) 4” universal dust hood.
hood.
(6) Heavy-duty clear plastic
(3) Heavy-duty clear plastic collector bags.
collector bags. (1) Table saw dust hood.
(1) 4” Y-fitting.
(2) 4” blast gates.
DUST COLLECTORS
75-040 M1
75-075 M1
$499. 99
reg. $720. 00 $1,499.
5/8” HOLLOW
CHISEL MORTISERS
1/4”, 5/16”, 3/8” & 1/2”
chisel and bit sets included.
Heavy-duty cast-iron head,
column and base built for
steady, vibration-free
performance.
Includes adapter bushings to
accommodate both 5/8” &
3/4” sized chisel shanks.
Spindle speed : 1720 rpm
Motor : 1 HP, 110 V
Large table with telescopic
extensions for enhanced
workpiece support.
Weight : 99 lbs (45 kg)
INCLUDED
* CFM ratings tested under resistance
to simulate typical shop usage.
75-050T M1
$749. 99
reg. $1,080. 00
Head tilts up to 30°
left or right for angled
mortising, and pivots
up to 180° for off table
mortising.
Weight : 106 lbs (48 kg)
INCLUDED
99
reg. $2,040. 00
1” HOLLOW CHISEL
MORTISER WITH
TILTING HEAD
1/4”, 3/8”, 1/2” & 3/4” chisel
and bit sets included.
Heavy-duty cast-iron construction,
machined with precision.
Gas head-cylinder, provides
smooth performance.
Spindle speed : 1720 rpm
Motor : 1 HP, 110/220V
Weight : 236 lbs (108 kg)
OPTIONAL CLOSED STAND
for 75-075 M1 & 75-050T
MORTISERS
75-070
$349. 99
reg. $450. 00
15

48” X 48” FOUR STATION
OAK WORKBENCH
Solid 1 1/2” thick laminated oak table top.
Includes four vises with a double row of bench
dog holes for each vise. Includes ten bench dogs
and four wooden stopper bars.
95-048
$1,199. 99
reg. $1,980. 00
95-060
$849. 99
reg. $1,200. 00
60” X 30” OAK WORKBENCH WITH
STEEL LEGS
Solid 1 1/2” thick table top with 2” apron for
extra support around the edges. Includes both
front and end vises with a double row of bench
dog holes in the table for each vise. Sturdy
adjustable height (33” to 39”) steel legs.
HEAVY-DUTY
UNIVERSAL MOBILE BASE
UNIVERSAL
MOBILE BASE
50-035
$169. 99
1000 lb
load capacity
8” DELUXE JOINTER
Independent in-feed and out-feed table
adjustment handwheels.
Magnetic switch for added safety.
Motor mounted on vibro-eliminators for smooth,
quiet operation.
Limited
quantities
95-054
50-166
$219. 99
reg. $276. 00
80-200LHC M1
$499. 99
reg. $750. 00
8” JOINTER WITH “BYRD” STYLE HELICAL HEAD
Sames features as model 80-200L M1 + “Byrd” helical head,
#200HB (4 rows, total of 36 inserts)
$3,299. 99
reg. $4,020. 00
80-100L M1
54” X 21” BIRCH WORKBENCH
Solid 1” thick laminated birch table top.
Includes both front and end vises with a
double row of bench dog holes in the table
for each vise.
FLEXIBLE EXPANDABLE ROLLER STAND
$1,099. 99
reg. $1,500. 00
6” CLOSED BASE JOINTER
Large, heavy-duty, center-mounted
cast-iron fence with 90° and 45°
positive stops.
Independent in-feed and
out-feed table adjustment
handwheels.
Cutter head speed : 5000 rpm
Motor : 1 HP, 115/230 V
Weight : 249 lbs (113 kg)
reg. $222. 00 Adjustable height from 23” to 36”.
9 nickel-plated rollers 1 1/2” x 13 3/4”.
50” maximum expanded length. Four
wheels with locking foot levers
200 lb
load capacity
400 lb
50-025
$79. 99
load capacity
Adjustable height from 24 1/4”
50-167S
reg. $114. 00
to 37”. 9 nickel-plated 2-way
$395. 99
500 lb
rollers 2 1/4” x 20”. 51 1/2”
maximum expanded length.
load capacity
6” OPEN BASE
JOINTER
55 1/4” tables.
Large, heavy-duty, center-mounted
cast-iron fence with 90° and 45°
positive stops.
Independent in-feed and out-feed table
adjustment handwheels.
reg. $540. 00
Jackscrew system for quick, easy
knife adjustment.
Cutter head speed : 5000 rpm
Motor : 1 HP, 115/230 V
Weight : 235 lbs (107 kg)
74 7/8”
TABLES
80-200L M1
$2,499. 99
reg. $3,120. 00
Cutter head speed : 5500 rpm
Motor : 2 HP, 220 V
Weight : 572 lbs (260 kg)
6” JOINTER WITH
“MAGNUM” HELICAL HEAD
Sames features as model 80-100L M1
+ “Magnum” helical head, #100H
(4 rows, total of 16 inserts).
80-100LHC M1
55 1/4”
TABLES
$1,679. 99
reg. $2,160. 00
JOINTERS
80-075L M1
$919. 99
reg. $1,200. 00
16