41FFA2240
Truck Balancers Adaptors - CEMB USA Balancing Machines
Truck Balancers Adaptors - CEMB USA Balancing Machines
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TRUCK WHEEL BALANCER ACCESSORIES<br />
41FF59322<br />
<strong>41FFA2240</strong><br />
41FF86174<br />
Original CEMB Accessories<br />
For Truck Wheel Balancers<br />
C206 - C212 - C218<br />
UC 215HW<br />
STANDARD KIT<br />
<br />
<br />
For wheel with central hole of Ø1.77”-8.7” (Ø45-221mm).<br />
Made up of 4 cones, a spacer ring and a lock nut with handwheel.<br />
41FF59368<br />
40FF43716<br />
3.1”÷4.3” (79÷110)<br />
40FF43745<br />
40FF43715<br />
2.4”÷3.2” (60÷81)<br />
40FF88351<br />
1.7”÷2.7” (43÷69)<br />
40FF51334<br />
40FF51315<br />
40FF79260<br />
40FF52417<br />
3.8”÷6.7” (97÷170)<br />
114008002<br />
301400525<br />
940010105<br />
290100060<br />
40FF43748<br />
7.9”÷8.7” (202÷221)<br />
940051000<br />
Visit our website to see our complete<br />
range of wheel balancers<br />
and other products<br />
LAST UPDATE 5/26/2015<br />
WWW.CEMB-USA.COM<br />
CATTRKAD-2
40FF42165<br />
TRUCK WHEEL BALANCER ACCESSORIES<br />
46FM87677<br />
41FF79255<br />
41FF83148<br />
42FM42432<br />
STANDARD TRUCK SHAFT<br />
C206 (A) SHAFT<br />
<br />
Standard shaft Ø40mm with pin<br />
(for Truck wheel balancers)<br />
<br />
Shaft Ø40mm without pin<br />
(for C206 (A) only)<br />
42FM42433<br />
312120137<br />
312120137<br />
325047011<br />
325047011<br />
GL40 QUICK NUT KIT<br />
DO NOT use ANY quicknut with TRUCK WHEELS<br />
<br />
Quicknut for car wheels. Kit made up of a nut, two plastic cups complete with rubber ring to protect alloy rims and a<br />
plastic ring.<br />
41FF83154<br />
41FF83147<br />
40FF79256<br />
40FF51334<br />
40FF79258<br />
40FF51315<br />
40FF79260<br />
UH20/2<br />
CEMB PATENT<br />
<br />
Universal bolt pattern adaptor (for wheels 3-4-5 holes or without center hole)<br />
OPTIONAL<br />
41FF42048<br />
40FF33438<br />
940052253<br />
2”÷2.8” (52÷72.5)<br />
40FF33439<br />
40FF33440<br />
1 PC<br />
115006002<br />
112019220<br />
40FF33441<br />
40FF33443<br />
1 PC<br />
1 PC<br />
40FF33442 SET OF 5<br />
LAST UPDATE 5/26/2015<br />
WWW.CEMB-USA.COM<br />
CATTRKAD-2
TRUCK WHEEL BALANCER ACCESSORIES<br />
40FF43726<br />
41FF56189<br />
41FF43728<br />
41FF53532<br />
86SB80238<br />
<br />
SR-USA<br />
Stud adapter for rim protection and high precision (for<br />
lug centric wheels) for standard locking<br />
WD + DC KIT<br />
<br />
WD Wheel support spacer for very wide wheels + DC<br />
spring pusher bush<br />
40FF56188<br />
40FF53531<br />
940013325<br />
940013701 50mm<br />
42FF46928<br />
80mm<br />
G40 WING NUT<br />
Steel wing nut with extended wings usable as alternative to<br />
the standard wing nut. Allows a greater tightening torque.<br />
12V ADAPTOR CABLE<br />
<br />
12V adapter cable for C206 (Standard kit)<br />
SR 215/2<br />
<br />
To centre wheels with 8 holes on Ø10.8”/11.25” (Ø275/285.75mm) and with 10 holes on<br />
10.8”/11.25”/13.2” (Ø225/285.75/335mm). They are supplied with two spiders and a pre-centering ring. Pre-centering on<br />
the central hole and on the guided stud bolts allows higher accuracy and centering without damaging alloy rims.<br />
41FF67879<br />
40FF67882<br />
40FF67881<br />
40FF67880<br />
40FF67916 SET OF 1<br />
40FF67883 SET OF 1<br />
LAST UPDATE 5/26/2015<br />
WWW.CEMB-USA.COM<br />
CATTRKAD-2
TRUCK WHEEL BALANCER ACCESSORIES<br />
40FF43747<br />
94FF37124<br />
94FF37123<br />
EU<br />
41FF03151<br />
<br />
CONE V<br />
To centre truck or bus wheels with a center hole of<br />
Ø11” (Ø281mm) by means of cones.<br />
ACCESSORY RACK<br />
<br />
Storage accessory rack for truck adaptors<br />
11” (281mm)<br />
DAYTON 20”-22.5”<br />
Wheel adaptor for Dayton wheels 20" and 22.5"<br />
DAYTON 20”-24.5”<br />
Wheel adaptor for Dayton wheels 20" and 24.5"<br />
LAST UPDATE 5/26/2015<br />
WWW.CEMB-USA.COM<br />
CATTRKAD-2
Change language