2015 WIKA USA

WIKA TYPE NUMBERS
MSRP List > WIKA Type Numbers
Ordering Guidelines for Pressure Gauges
OPTION #1 - Quick Order 7- or 8-Digit Part Numbers:
Example: P/N 5245531
Use the part number for the instrument you wish to order.
If you need additional options, or do not see a part number referenced for the exact product you need, you may
use the Ordering Code format as indicated below (see Option #2). A 7-or 8-digit part number will be provided
with your order confirmation. The part number provided may then be used for re-ordering purposes.
OPTION #2 - New Order Code Format
P/N: 5245531
Descriptive text format: 213.53 2.5 5000PSI/BAR 1/4 B R FF SIL
1
MODEL TYPE
standard WIKA format
2
DIAL CODE
2 digit format
(inch equivalent)
3
PRESSURE RANGE CODE
4 character format
- LETTER = pressure class
- NUMBER = pressure equiv
Comp & > 10PSI Base
VAC & 10PSI MBAR Base
4
PRESSURE SCALE CODE
2 letter format
1st letter = PRIMARY
2nd letter = SECONDARY
5
CONNECTION TYPE
2 character format
-LETTER = number
-NUMBER = size
6
CONNECTION LOCATION
2-character format
7
FEATURES / OPTIONS
3 character format
Represents common
features constructed with
base gauges (contacts/
switches/transmitter options
up to 6 characters)
213.53.25 - P50CPB - N2BK / FS1 / FFS / RB3
MODEL
NUMBER
SS CASE
COPPER ALLOY
WETTED PARTS
LIQUID FILLED CASE
CRIMPED RING
DIAL
SIZE
PRESSURE
RANGE
PRESSURE
SCALE
Required Base Gauge Configuration
2.5”
(63mm)
DIAL
PRESSURE
EQUIVALENT
TO 5000PSI
PRESSURE
SCALE(S)
PSI - OUTER
BAR - INNER
1 MODEL TYPE - standard WIKA format
– Standard WIKA format
– Special version of standard models followed
by an indicator - i.e 213.53R
2 DIAL CODE
– 2 digit format
● Dial size in inches - ex. 2.5" = .25, 10" = .10
3
1 2 3 4 5 6 7 7 7
PRESSURE RANGE CODE
– Letter - Pressure class
● V = vacuum, C = compound, M = low, P = mid/high
● For pressure compound and > 10PSI - base value PSI
● For vacuum and pressures < 10PSI - base value MBAR
● Non-standard scales - do not use codes
Enclose range and scale in brackets [ ]
-i.e 3+ scales, "g" scales, Flow, Force, ATM 1
1
Customer to provide details on special configurations
PROCESS
CONNECTION
SIZE
1/4" NPT
MALE
CONNECTION
4
PROCESS
CONNECTION
LOCATION
BACK
MOUNT
(CENTER)
OPTION
OPTION
Options in alphabetical order
SILICONE
CASE FILL
1000CST
FRONT
FLANGE
STAINLESS
STEEL
PRESSURE SCALE CODE
– 2 letter format
● 1st letter = primary code
● 2nd letter - secondary code (X indicates "none")
OPTION
BRASS
RESTRICTOR
0.3mm
ORIFICE
5 CONNECTION TYPE
– 2 character format
● For female connection, add "F" to the end of code (ex = N2F)
● XX used for special configurations 1
6
7
CONNECTION LOCATION
– 2 character format
FEATURES / OPTIIONS
– 3 character format
● Standard features in addition to the base gauge
● List by category, then alphabetically
● Contacts/switches/transmitter options up to 6 characters
NOTE: If you provide a part number and descriptive text, we will use the part number only.
If you are unclear, do not see the Option(s) needed, or require ordering assistance, please contact a
WIKA Customer Care or Technical Support Team representative.
7