You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
5<br />
Insert a small Hair Pin Clip into the hole at one end of the Axle. Slide a Large Flat Washer and a Wheel onto the Axle.<br />
Slide the Axle through the holes at the ends of the Legs. Slide the remaining Wheel onto the Axle. Slide a Large Flat<br />
Washer onto the Axle and secure with remaining Hair Pin Clip.<br />
NOTE: WHEEL HUBS SHOULD FACE LEGS.<br />
Hair Pin Clip<br />
Wheel<br />
Hair Pin Clip<br />
Large Flat Washer<br />
Axle<br />
Large Flat Washer<br />
6<br />
Attach<br />
the Charcoal Pan Assembly to the inside front panel of the Firebox using (4) 1/4-20x1/2” Hex Bolts. Tighten securely<br />
with adjustable wrench (not provided).<br />
Charcoal Pan Assembly<br />
Front of Firebox<br />
Page 10<br />
Firebox<br />
NOTE:<br />
Mounting bracket with hole<br />
fits over threaded bushing<br />
1/4-20x1/2” Hex Bolts