Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Products</strong> for high strength sealant and adhesive<br />
MS Polymer<br />
<strong>KGS</strong><br />
Adhesive brochure<br />
10<br />
MS Polymer<br />
mS Polymer is a new generation, fast<br />
Curing, one part, moisture-curing modified<br />
hybrid polymer adhesive which is<br />
neutral curing and with low odour. The<br />
adhesive retains some flexibility after<br />
curing and offers excellent adhesion to<br />
most <strong>com</strong>mon building materials.<br />
mS Polymer achieves outstanding bonding<br />
and sealing properties <strong>com</strong>bined<br />
with ease of use.<br />
Being elastomeric it can be used on<br />
adhesive applications that are subject to<br />
movement, impact and shock. Typical<br />
applications include:<br />
container, caravans, coaches, ventilation,<br />
ducting, storage tanks, boat building<br />
and repair, electrical.<br />
Advantages<br />
• Excellent bonding on most<br />
substrates.<br />
• Chemically neutral, fragrance free<br />
and no solvent.<br />
Storage<br />
Store between 5°C and 25°C in dry<br />
conditions.<br />
Shelf life is approximately 12 months<br />
in original packaging.<br />
Limitations<br />
Do not use in submerged joints.<br />
Premium Sealant and Adhesives<br />
MS Polymer <strong>KGS</strong>/BenB 290ml<br />
Art. Code Description Packing Unit € p.p. Stock<br />
min. order quantity<br />
1029<br />
892.604000 mS Polymer <strong>KGS</strong>/BenB - Brown 12 6.90 ¢<br />
892.604005 mS Polymer <strong>KGS</strong>/BenB - Grey 12 6.90 ¢<br />
892.604010 mS Polymer <strong>KGS</strong>/BenB - White 12 6.90 ¢<br />
892.604015 mS Polymer <strong>KGS</strong>/BenB - Black 12 6.90 ¢<br />
Surface Preparation<br />
Surfaces can be damp but not running wet, they must be clean, free from dirt, grease<br />
and other contamination.<br />
The product offers good adhesion to a wide range of materials but where adhesion is<br />
particularly important two primers are available for porous and non-porous substrates.<br />
Application<br />
Cut of the end of the cartridge with a sharp knife, avoiding damage to the thread.<br />
Cut nozzle to desired size or angle and screw onto the cartridge. Fit cartridge into the<br />
dispensing gun. Apply the adhesive firmly into the prepared joint by applying an even<br />
pressure to the gun trigger. Ensure good contact to joint surfaces by preparing the joint.<br />
Strike off any excess adhesive flush with the surface within 20 minutes of application.<br />
Clamping and/or support may be required until adhesive cure is sufficiently advanced to<br />
be self supporting. Where necessary the joint edges can be masked to prevent contamination<br />
of adjacent surfaces and ensure a neat bond line. When applying surface coating<br />
best results are obtained applying wet on wet and within 4 hours. Thereafter cleaning<br />
with acetone, joints can be painted at any time.