Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
22<br />
21100 21200 VALVE LAPPERS<br />
For Hand Lapping Valves.<br />
Thick handles for easy lapping. 21100 has 1-1/8" and 1-3/8"<br />
diameter cups for larger valves. 21200 has 5/8" and 13/16"<br />
diameter cups for smaller valves.<br />
21100 Large Valve Lapper. Skin-packed. Shipping wt. 4 oz.<br />
21200 Small Valve Lapper. Skin-packed. Shipping wt. 2 oz.<br />
ENGINE<br />
21100<br />
UNIQUE LOCKING TAB POSITIVELY SECURES CUPS<br />
TO STURDY HANDLES. ELIMINATES SLIPPAGE<br />
21200<br />
19700 VALVE HOLDER<br />
For Both 14mm & 18mm Spark Plug Threads.<br />
Commonly used when valve springs or valve stem seals are<br />
replaced. Air pressure helps prevent the valve from falling into<br />
the combustion chamber. Comes with two-step fitting for both<br />
14mm &18mm threads. Heavy duty 12" flexible hose al<strong>low</strong>s<br />
easy access to spark plug hole and air supply. Thread fitting<br />
to spark plug hole and other end to air supply.<br />
19700 Valve Holder. Skin-packed. Shipping wt. 5 oz.<br />
62450 HEATER HOSE COUPLER<br />
REPAIR KIT<br />
Removes Even the Most Corroded Heater<br />
Hose Couplers on GM Vehicles.<br />
Kit contains a Heater Hose Coupler Remover that can be<br />
driven into couplers and then turned out with a 5/8" socket or<br />
wrench. When the coupler is extremely corroded the special<br />
tapered, reverse drill can be used to remove the remaining<br />
connector. Then the tap can be used to restore the original<br />
threads. For use on GM quick disconnect heater hose fittings<br />
found on many GM models using the 3.1L, 5.0L, 5.7L and<br />
6.5L engines. Includes storage case with tray.<br />
62450 Heater Hose Coupler Repair Kit. Storage Tray. Shipping wt. 10 oz.<br />
62200 Heater Hose Coupler Remover 62260 Left Hand Piloted Drill<br />
62290 Pipe Thread 1/2-14 NPT Tap<br />
62200 HEATER HOSE COUPLER<br />
REMOVER<br />
Removes Broken Heater Hose Couplers.<br />
Drive the tool into the broken coupler. The splines cut their<br />
way into the coupler, al<strong>low</strong>ing you to turn it out with a 5/8"<br />
socket or wrench.<br />
62200 Heater Hose Coupler Remover. Skin-packed. Shipping wt. 2 oz.<br />
18980 PNEUMATIC U-JOINT DRIVER<br />
Quickly Removes the U-Joint Cap from the<br />
Drive Shaft on Most Rear Wheel Drive Vehicles.<br />
Use the driver with an air hammer to remove u-joint caps up to<br />
1-5/16" diameter. Prevents damage to drive shaft and axle shaft<br />
ears, when presses or chisels are used. On some vehicles<br />
the u-joint is retained with plastic from the factory. The plastic<br />
must be removed prior to driving out the u-joint caps.<br />
18980 Pneumatic U-Joint Driver. Skin-packed. Shipping wt. 1 lb. 4 oz.<br />
www.<strong>lisle</strong>corp.com