Marine Solutions... - Deks Olje

Marine
Solutions...
Solutions
Welcome to the easiest
maintenance system afloat!
Origins of the Owatrol Marine range were found
in the Norwegian fjords and Great Lakes of
America. These products, some of them for
over 60 years, have been used throughout
the world, from the Arctic to the Carribean
and are for both interior and exterior boat
maintenance.
Today this range of products is designed to
help you enjoy years of boating with minimum
maintenance.
Make sure that your boat gets the very best and
most beautiful finish it deserves. Use Owatrol
Marine line products and ENJOY BOATING!
Please Please use use this this information information as as a a supplement, supplement, not not as as a a
subsitute for the directions on the label.
OWATROL COATINGS, USA
611 Phippen Waiters Road
Dania Beach, Florida 33004
www.owatrol.com
www.deksolje.com
06/10 - rcs Tours 331 998 484 - Photo credits: Fjord - Eniz Umuler
Gabf8liot - Gaspr13 - Jérôme Salort - Dbvirago -
Marine
GUIDE
www.owatrol.com

Protect/Varnish
DEKS OLJE ®
D.1 & D.2
For Teak and other boating woods.
Proven for years from the fjords of
Norway to the islands of the Caribbean.
Deks Olje D.1 - Matte Finish
gives a rich transparent finish so all previous finishes
must be removed. Wood should be clean and sanded before
application. Plan to spend most of the day applying D.1. Many other
jobs can be done between coats of D.1.
Now the marine finish that revolutionized boat upkeep in Norway is
scoring a brilliant success in America. Even on boats cruising under a
blistering Caribbean sun, Deks Olje not only lasts, but looks great, too.
That’s why it’s been used for years to provide carefree protection to
Norwegian fishing boats, cruise ships and pleasure craft.
Deks Olje D.2 - Gloss Finish
is a flexible gloss finish and should be used over #1 for best results.
Use D.2 for extra protection and easier maintenance especially on
spars, oars, hulls, outboard transoms, cabin soles and cockpit trim.
lf the grain is raised, wet-sand the wood between D.1 and D.2
applications, according to wet sanding directions on the Deks Olje
label. For a satin finish, mix D.1 and D.2 together in equal parts. Apply
two coats after the surface is properly treated with D.1.
For a beautiful gloss finish, apply six coats of D.2.
OWATROL® OIL
TECHNOLOGY
Remove/Clean/Restore
MARINE STRIP
GEL REMOVER - WATER WASHABLE
Easy to apply gel.
Let the product work.
Will remove up to 8 coats.
Rinse with water.
Solvent free - biodegradable.
DECK CLEANER
CLEANER & BRIGHTENER
One step cleaner and brightener that removes
ground-in and surface dirt to weather-beaten
marine wood such as Teak and Mahogany.
GELCOAT RESTORER
COLOR RESTORER - PLASTICS & GELCOATS
Restores and protects fi berglass surfaces.
Deep penetrating oil. Long lasting fi nish.
ECO-DECO® PRODUCT
WATER-BASED
Treat/Paint
MARINE OIL
RUST INHIBITOR & PAINT CONDITIONER
Improves paint fl ow & workability - eases application.
Aids adhesion - reduces paint peeling.
No pull - no drag - no brushmarks - Multi-purpose usage.
OWATROL ® C.I.P.
CORROSIVE INHIBITING PRIMER
Chemical resistant anti-rust primer.
Ideal for diffi cult conditions
(tropical climate, corrosive gases, coastal areas,…)
OWATROL ® ALU
MARINE ALUMINIUM PAINT
Rust/corrosion protection.
Excellent adhesion. Deep penetration.
Eliminates the need for a primer.
OWATROL® OIL
TECHNOLOGY