REA-JET SC - Wilux Print AG

REA-JET SC
www.rea.de
Compact
Small Character
Ink Jet Printer
for texts and
logos
coding · dating · marking
REA
Elektronik
GmbH

High-Tech for the Industry
REA-JET SC
The REA–JET SC ink jet marking
system is a powerful small character
printer which was specially
developed for use in industrial environments.
It guarantees an optimum
print quality, combined with
reliability and minimum maintenance
needs. The system works
according to the proven ”Continuous
Ink Jet” print principle which,
due to the permanent charging of
the droplets, allows for the most
accurate small character printing of
2 to 12 mm high texts in up to
three lines and most types of data
even at high speeds of up to
300 m/min. The interface is
extremely user-friendly. The text is
entered on the integrated front panel
key pad. The graphic-capable
display allows for accurate checking
of the text entry and informs the
user at all times about the status of
the system. The system can operate
with fast-drying MEK-, Ethanoland
water-based inks and can
therefore be used for marking onto
a large variety of substrates, from
absorbent to non-absorbent surfaces
such as cardboard, films,
metal, glass and plastic.
Print sample
Not only texts, but also high-quality
graphics, logos and bar codes can
be printed. A comfort feature of the
printer is the built-in automatic selfcleaning
system which flushes the
print head completely during startup
and before shutting down, as a
preliminary measure for reliable
start-up every time.
REA
Teichwiesenstr. 1
D-64367 Muehltal
E-Mail: reainfo@rea.de
www.rea.de
Phone +49 (0) 61 54 / 6 38-0
Fax +49 (0) 61 54 / 6 38-195
Elektronik
GmbH
Technical Data
– Non-contact marking of
products, packaging and
components with a variable
print height of 2 to 12
mm
– Marking of texts, graphics,
logos and bar
codes in optimum print
quality
– Prints up to three lines
of text
– Print speed up to
300 m/min
– User-friendly and easyto-learn
operating control
in dialogue mode
– Storage capacity up to
1000 different text
messages
– Selectable print delay
– Variable adjustment of
print height, print width
and character spacing
– Capability of combining
variable and fixed text
within a print line
– Continuous numbering,
universal counter with
variable incrementation,
real-time clock with variable
calendar for printing
date and time, shift texts
and batch printing, automatic
text repeat
– Character orientation
normal, upside down,
mirror-image, forwards,
backwards, vertical print
– Continuous markings
– Automatic flushing of the
print head when turning
the printer on and off
– Print head umbilical:
3 m long
– Stainless-steel housing,
system protection rating
IP54
- Automatic viscosity
measuring, charge and
droplet brake up /
modulation control
- Ink level control
Inks
– MEK-based inks, fastdrying
– Ethanol-based inks
– Water-based inks
Print matrix
– 5x5, 7x5, 10x10, 16x10,
24x16
Power supply
– 230/115V AC +10%
50/60 Hz, 115 VA
Interfaces
– Photoelectric detector
(product sensor)
– Shaft encoder
– RS 232 serial
– Network capability
(option)
Operating environment
– Temperature +5°C to
+ 45°C
– Air humidity 10-90%,
non-condensing
Dimensions
– Printer
Width: 440 mm, Height:
495 mm, Depth: 255 mm
– Print head
Diameter: 44 mm,
Length: 240 mm
Weight
– Printer: 24 kg
Alterations reserved.
SC 07/05/HMD/1000