MFS Undercut Drilling Machine
The operating instruction of MFS undercut bolt drilling machine
The operating instruction of MFS undercut bolt drilling machine
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>MFS</strong> CO., LTD<br />
Your Fixing Systems Specialist!<br />
Product Name: Manual <strong>Undercut</strong> Drill <strong>Machine</strong><br />
Mark: <strong>MFS</strong><br />
Model No.: JR1042<br />
Country of Origin : China<br />
Usage: Used for drill the special hole for undercut anchor in Stone,Granite,Ceramic Tile.<br />
Technical of <strong>Machine</strong>:<br />
Voltage 220v No Load Speed 9300r/min<br />
Motor Bosch Insulation time/11<br />
Grade<br />
Current 6.7A Weight 12KG/PCS<br />
Input Power 1400W Size 530*230*305<br />
Specialty of <strong>Machine</strong>:<br />
Easy to Take,Best Quality,Low Price.<br />
1. Reasonable structure design, portable, simple operation and strong practicability.<br />
2. It’s use Bosch motor, high speed, low energy consumption, stable performance, long service life,<br />
etc.<br />
3. Suitable for all kinds of stone material, ceramic plate, glass plate, plate, marble back bolt hole<br />
drilling of various plates of work and its hole. This machine is applicable now stone curtain wall,<br />
glass curtain wall project need all dry hanging back bolt holes.<br />
4. Borehole Rio as a molding, as easy to carry and operation can be either a single operation also<br />
can use the combined machine! Also can cooperate with large punching machine as a back pin<br />
hole for single and scattered living ending! Use of flexible, reduces the plates move.<br />
5. Cooperate with the use of bit: cooperate with the use of M6 and M8, etc all kinds of sintering<br />
type diamond stone drill head.<br />
Using Cautions<br />
1.Insert the power supply, it must be installed leakage protector, and make the power cord from<br />
the ground to keep a certain distance;<br />
2. The equipment must first open the water valve, before running for bit front there is water<br />
overflowing, may start;<br />
3. Ensure the cooling water pressure in the 3 kg/cm2, and keep the water without sundry, to<br />
prevent clogging.<br />
4. Manual drilling, down tinto hole are forbidden to handle. After the straight hole in place, can be<br />
the Rio hole handle. Both drilling and its hole, don't handle pressure is too large, the movement<br />
wants. Bore Rio is completed, should be loose pioneering handle, and then let go of drilling<br />
handle.
<strong>MFS</strong> CO., LTD<br />
Your Fixing Systems Specialist!<br />
The Size of <strong>Drilling</strong> Hole<br />
Photos of the <strong>Machine</strong>
<strong>MFS</strong> CO., LTD<br />
Your Fixing Systems Specialist!
Change language