Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PARAGE SHAFT EXTENDERS.<br />
Parage Graphite / Steel Golf Shafts fit virtually all graphite shaft as well<br />
as the most popular steel shaft sizes. High-quality nylon blended plastic<br />
is designed to extend one club (maximum 2" for swing clubs) and color<br />
coded to 11 sizes. Will work with graphite shafts as well as the 3 largest<br />
models will fit 0.560", 0.580" and 0.600" steel shafts respectively.<br />
PGGSE-485-WH 0.485” OD<br />
PGGSE-490-BL 0.490” OD<br />
PGGSE-495-PK 0.495” OD<br />
PGGSE-500-GD 0.500” OD<br />
PGGSE-5075-OR 0.5075” OD<br />
PGGSE-515-YL 0.515” OD<br />
PGGSE-5225-GN 0.5225” OD<br />
PGGSE-530-RD 0.530” OD<br />
PGGSE-545-PU 0.545” OD<br />
PGGSE-560-BK 0.560” OD<br />
PGGSE-575-SI 0.575” OD<br />
Graphite Shaft Measuring Gauge.<br />
PGGSMG<br />
The Graphite Golf Shaft Measuring Gauge helps simplify and<br />
determine the correct shaft extension for the job. It can help<br />
minimize labor and maximize fit in lieu of a caliper. Color<br />
coded to 11 sizes and fits virtually all graphite shafts as well<br />
as the most popular steel shaft sizes. To use, simply insert the<br />
gauge into the butt end of the shaft you wish to extend without<br />
forcing it in. When the gauge stops you identify the color just<br />
above the butt of the shaft and order or choose the correct size<br />
shaft extender to do the job correctly.<br />
GDW Premium Graphite Extenders.<br />
New patent pending design uses a military grade nylon plastic with fiber reinforced material, which possesses toughness, resiliency and a<br />
high compressive strength. Especially designed epoxy bonding pillars (Bond Locking Technology), allows the epoxy to flow and be distributed<br />
between the pillars resulting in an even dispersion. This new extension will also allow for sanding if necessary to give a better fit when required.<br />
GDW6004 Regular with 0.485” ID<br />
GDW6004P Regular+ with 0.500” ID<br />
GDW6005 Oversize with 0.535” ID<br />
GDW6005P Oversize+ with 0.545” ID<br />
steel shaft extender.<br />
Steel shaft extenders provide exacting<br />
fit for most steel shafts. Extends 2 clubs.<br />
ex580<br />
0.580 OD Extender fits steel shafts with 0.540 ID.<br />
ex600<br />
0.600 OD Extender fits steel shafts with 0.560 ID.<br />
EX62-001-0620 0.620 OD Extender fits steel shafts with 0.580 ID.<br />
aluminum shaft extender.<br />
Aluminum shaft extender is affordable and all-purpose. Use<br />
ALX for graphite and ALXS for steel shafts. Extends 2 clubs.<br />
ALX 0.585 OD Extender fits graphite shafts with 0.515 ID.<br />
ALXS 0.590 OD Extender fits steel shafts with 0.560 ID.<br />
BELLY shaft extender.<br />
Convert a standard putter shaft into a belly or long putter shaft. Each<br />
extension measures 11” with either a 0.520” or 0.530” post size outside<br />
diameter on one end to slide inside the existing shaft. Extends 1 club.<br />
GSEGXL-520 Extended length (11”) 0.600 OD fits graphite shafts with 0.520 ID.<br />
GSEGXL-530 Extended length (11”) 0.600 OD fits graphite shafts with 0.530 ID.<br />
CLUBMAKING SUPPLIES<br />
151
Change language