Derailleurs

CAMPAGNOLO 

Campagnolo Super Record EPS 11sp Front Derailleur 

• EPS Electronic Power Shift electronic front derailleur. This front derailleur 

requires specific, separate EPS wire harness, battery pack, and shifters 

• Monolithic technopolymer, carbon fiber body for the best stiffness and 

weight possible 

• Features a carbon outer cage, alloy motor and gear housing 

• Waterproof, high over torque motor-gear box creates solid, ultra fast, under 

load front shifts 

• Automatic repositioning/trim depending on the rear cog selected 

• Braze-on fits frames with pre existing front derailleur braze-on mounts. 

Carbon braze-on mounts require the EPS Front Derailleur Stiffener (CP-93297). 

*Specific EPS band-clamp adapters are also available (use CP-95107 for 

31.8mm or CP-95109 for 34.9mm) 

part# rings speed clamp capacity min/max color price 

CP-40020 double 11sp braze-on* 16T 34/55T carbon/black 

Campagnolo Super Record 11sp Front Derailleur 

• Longer lever arm than previous models, dramatically increases 

shifting performance 

• Updated derailleur design requires less hand movement and thus facilitates 

better up-shifting to the larger chainring 

• This version of the new mechanical groupsets uses a one piece carbon 

derailleur outer cage that reduces weight while still maintaining the same 

rigidity and functionality 

• Body design and geometry that is compatible with compact or traditional 

chainring combinations 

• S2 System braze on has an additional component on the derailleur that 

increases stiffness 

• 71g braze-on fits frames with pre existing front derailleur braze-on *(can also 

be used with 31.8mm or 34.9mm band-clamp adapters) 

• Only compatible with MY2015+ Chorus, Record and Super Record shifters 


CP-40004 double 11sp S2 System braze-on* 16T 34/54T carbon/black 

Campagnolo Record EPS 11sp Front Derailleur 



• Monolithic technopolymer, carbon fiber body for the best stiffness and 


• Features an alloy outer cage, steel motor and gear housing 







31.8mm or CP-95109 for 34.9mm) 



Campagnolo Record 11sp Front Derailleur 





• Improved design for greater rigidity, faster and more precise shifting 

• Single-piece, carbon outer semi-cage improves stiffness of the structure 

during downshifts 









CP-40109 double 11sp S2 System braze-on* 16T 34/53T carbon/black 

Campagnolo Super Record EPS 11sp Front Derailleur 

Campagnolo Super Record 11sp Front Derailleur 

Campagnolo Record EPS 11sp Front Derailleur 

Campagnolo Record 11sp Front Derailleur 

Derailleurs 

Front 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

Wheels 

phone 800.558.8324 

529


Front 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Campagnolo Chorus EPS 11sp Front Derailleur 

Campagnolo Chorus 11sp Front Derailleur 

Gevenalle BURD Front Derailleurs 

CAMPAGNOLO 

Campagnolo Chorus EPS 11sp Front Derailleur 



• monolithic technopolymer, carbon fiber body for the best stiffness and 


• Features an alloy outer cage, steel motor and gear housing 







31.8mm or CP-95109 for 34.9mm) 



Campagnolo Chorus 11sp Front Derailleur 





• Improved design for greater rigidity, faster and more precise shifting 

• Light, molded alloy cage has a plate on the tip of the outer cage to 

silence shifts 









CP-40218 double 11sp S2 System braze-on* 16T 34/53T black 

GEVENALLE 

Gevenalle BURD Front Derailleurs 

• BURD = Blatantly Upgraded Rebranded Derailleur 

• Smaller steel cage leads to more precise and assured shifting when the mud 

starts to build up 

• Targetted for a better fit with 36/46 cyclocross gearing (works with 34/50 

compact also) 

• Clamp version fits 34.9 (and 31.8 with included adapter) 

• Repair/crash replacement available through: gevenalle.com/support 

part# rings pull speed clamp capacity max price 

VG-2711 NEW double/triple bottom 10/11sp braze-on 16T 50T 

VG-2710 NEW double/triple bottom 10/11sp 34.9 16T 50T 

INTERLOC RACING DESIGN 

Interloc Alpina Front Derailleur 

• For use with standard road triple cranks but optimized for cranks with smaller 

rings such as 48/36/24t or 50/36/26t 

• Braze-on fits frames with pre existing front derailleur braze-on or 28.6, 

31.8mm or 34.9mm braze-on/band-clamp adapters 

part# rings speed clamp capacity max color price 

RD-2812 triple 9/10sp braze-on 24T 50T silver 

Tubes & 

Tube Care 

Wheels 

Interloc Alpina Front Derailleur 

530 web www.bti-usa.com

Shifters 

Wheels 

SRAM 

SRAM GX 11sp Front Derailleur 

• Specific to SRAM’s GX 2x11-speed mountain drivetrain to offer super-fast/ 

smooth shifting and a full range access while in big ring with no chain rub 

• Dedicated design for top-pull or bottom-pull cable routing 

part# mount pull speed clamp / rings capacity max color price 

GS-2651 NEW high clamp bottom 2x11 24/36t 12T 36T black 

GS-2652 NEW high clamp top 2x11 24/36t 12T 36T black 

GS-2653 NEW high DM bottom 2x11 24/36t 12T 36T black 

GS-2656 NEW high DM top 2x11 24/36t 12T 36T black 

GS-2657 NEW low clamp bottom 2x11 24/36t 12T 36T black 

GS-2658 NEW low clamp top 2x11 24/36t 12T 36T black 

GS-2659 NEW low DM bottom 2x11 24/36t 12T 36T black 

GS-2660 NEW low DM top 2x11 24/36t 12T 36T black 

GS-2661 NEW mid DM bottom 2x11 24/36t 12T 36T black 

GS-2662 NEW mid DM top 2x11 24/36t 12T 36T black 

SRAM XX 10sp Front Derailleur 

• Specific to SRAM’s XX 2x10-speed mountain drivetrain to offer super-fast/ 

smooth shifting and a full range access while in big ring with no chain rub 

• Low-clamp/top-swing (TS), high-clamp/down-swing (DS), or direct-mount 

(DM) fitment options 

• Clamp options available to fit 31.8/34.9/38.2mm seat tubes (separate shim 

needed for 28.6mm seat tubes) and designed for 66-69 degree chainstay/ 

seat-tube angles 

• Direct-mount options are chainring size/combination specific and available in 

three versions: S1 for 42.7mm or S3 for 22.1mm mounts 

• Dedicated design for top-pull or bottom-pull cable routing 

• Forged alloy clamp/body with a formed steel cage and Torx-T25 hardware: 120g 


GS-2620 low (TS) top 2x10 31.8/34.9mm 15T 45T silver 

GS-2621 low (TS) bottom 2x10 31.8/34.9mm 15T 45T silver 

GS-2624 low (TS) top 2x10 38.2mm 15T 45T silver 

GS-2626 high (DS) top 2x10 31.8mm 15T 45T silver 


GS-2629 high (DS) bottom 2x10 34.9mm 15T 45T silver 


GS-2634 S1 (DM) top 2x10 28/42t 14T 42T silver 

GS-2635 S1 (DM) bottom 2x10 28/42t 14T 42T silver 

GS-2645 S3 (DM) bottom 2x10 26/39t 13T 39T silver 

GS-2646 S3 (DM) top 2x10 28/42t 14T 42T silver 

GS-2651 

GS-2662 

GS-2659 



Front 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

GS-2620 

Saddles 

Seatposts 

Spokes 

Stems 

KITFACTORY ON BTI-USA.COM 

BTI’s improved group & kitting system offers hundreds of components 

to choose from, all at discounted prices to suit just about any bike 

build. Savings of 5% on every order. For details, see page 8. 

GS-2626 

SRAM XX 10sp Front Derailleur 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

phone 800.558.8324 

531


SRAM 

Front 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

GS-2980 

GS-3081 

SRAM X0 10sp Front Derailleur 


• Specific to 2x10 or 3x10-speed mountain drivetrains (2x10 for 49.5mm 

chainline, 3x10 for 51mm chainline) 

• X-Glide technology for fast/smooth shifting and a full range access with littleto-no 

chain rub in cross-chain combinations 

• Low-clamp/top-swing (TS), high-clamp/down-swing (DS), or direct-mount 

(DM) fitment options 

• Clamp options available to fit 31.8/34.9/38.2mm seat-tubes (separate shim 

needed for 28.6mm seat tubes) and designed for 66-69 degree chainstay/ 

seat-tube angles 

• Direct-mount options are chainring size/combination specific and available in 

three versions: S1 for 42.7mm (2-bolt), S3 for 22.1mm (2-bolt), or H0 (1-bolt + 

anti-rotation slot) 

• All-Mountain (AM) offerings optimized for optional 22/36t and/or 24/38t gearing 

• Compact (CP) version offers enhanced clearance for 27.5/29” frame designs 

• Configurations for top-pull and/or bottom-pull cable routing depending 

on specification 

• Forged alloy clamp/body with a formed steel cage: 130g 


GS-2976 low (TS) top 2x10 31.8/34.9mm 14T 38T (AM) black/silver 

GS-2977 low (TS) bottom 2x10 31.8/34.9mm 14T 38T (AM) black/silver 

GS-2900 low (TS) top 2x10 31.8/34.9mm 15T 45T black/silver 

GS-2901 low (TS) bottom 2x10 31.8/34.9mm 15T 45T black/silver 

GS-3076 high (DS) top 2x10 31.8mm 14T 39T (CP) black/silver 


GS-2908 S1 (DM) bottom 2x10 26/39t 13T 39T black/silver 

GS-2980 S3 (DM) top 2x10 22/36t 14T 36T (AM) black/silver 

GS-2981 S3 (DM) bottom 2x10 22/36t 14T 36T (AM) black/silver 

GS-2982 S3 (DM) top 2x10 24/38t 14T 38T (AM) black/silver 

GS-2983 S3 (DM) bottom 2x10 24/38t 14T 38T (AM) black/silver 

GS-2911 S3 (DM) top 2x10 26/39t 13T 39T black/silver 



GS-2768 NEW H0 (DM) top 2x10 22/36t, 24/38t 14T 38T (AM) black/silver 

GS-2769 NEW H0 (DM) bottom 2x10 22/36t, 24/38t 14T 38T (AM) black/silver 

GS-3078 H0 (DM) top 2x10 22/36t, 24/38t 14T 38T (CP) black/silver 

GS-2916 low (TS) top 3x10 31.8/34.9mm 22T 44T black/silver 

GS-2917 low (TS) bottom 3x10 31.8/34.9mm 22T 44T black/silver 



GS-2926 S3 (DM) bottom 3x10 22/33/44t 22T 44T black/silver 

GS-3081 H0 (DM) top 3x10 22/33/44t 22T 44T (CP) black/silver 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

GS-3092 

GS-3090 



• Specific to 2x10 speed mountain drivetrains 

• X-Glide: designed to make full power shifts when needed 

• High direct mount or 34.9mm clamp with 31.8mm shim 

• Dedicated top and bottom pull 


GS-3090 NEW low (TS) top/bottom 2x10 31.8/34.9mm 15T 38T black/silver 

GS-3091 NEW high (DS) top 2x10 31.8/34.9mm 15T 38T black/silver 

GS-3092 NEW high (DS) bottom 2x10 31.8/34.9mm 15T 38T black/silver 

GS-3093 NEW high (DS) top 2x10 High DM 15T 38T black/silver 

GS-3094 NEW high (DS) bottom 2x10 High DM 15T 38T black/silver 

GS-3095 NEW low (TS) top/bottom 2x10 Low DM 15T 38T black/silver 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

Wheels 


SRAM 


• Specific to either 2x10 or 3x10-speed mountain drivetrains (2x10 for 49.5mm 

chainline, 3x10 for 51mm chainline) 

• X-Glide technology for fast/smooth shifting and a full range access with littleto-no 

chain rub in cross-chain combinations 

• Low-clamp/top-swing (TS) or high-clamp/down-swing (DS) fitment applications 

• Clamp options available to fit 31.8/34.9mm seat-tubes (separate shim needed for 

28.6mm seat-tubes) and designed for 66-69 degree chainstay/seat-tube angles 

• Convertible between top-pull and bottom-pull cable routing 

• Alloy clamp/body with a formed steel cage: 180g 

part# mount pull speed clamp dia. capacity max color price 

GS-2751 NEW high (DS) top 2x10 31.8/34.9mm 15T 45T black 

GS-2755 NEW high (DS) bottom 2x10 31.8/34.9mm 15T 45T black 

GS-2985 low (TS) top/bottom 2x10 31.8/34.9mm 15T 45T black 

GS-2989 low (TS) top/bottom 3x10 31.8/34.9mm 22T 44T black 


• For 2/3x9-speed drivetrains: low-clamp/top-swing (TS), or high-clamp/downswing 

(DS) configurations 

• Fits 34.9/31.8mm seat tubes with included adapter (no 28.6mm) 


• For 66-69 degree chainstay/seat-tube angles (most common) 

• Designed for 47.5-51.0mm chainline applications: 180g 

part# clamp pull speed clamp dia. capacity max color price 

GS-2779 low (TS) top/bottom 9sp 31.8/34.9mm 22T 44T black/silver 

SRAM 3.0 7/8sp Front Derailleur 

• For 2/3x7/8-speed drivetrains: high-clamp/down-swing (DS) type 

front derailleur 

• Fits 34.9/31.8mm seat-tubes with included adapter (no 28.6mm) 


• For 66-69 degree chainstay/seat-tube angles (more common) 

• Designed for 47.5-51.0mm chainline applications: 210g 

part# clamp pull speed clamp dia. capacity max price 

GS-200313 high (DS) top/bottom 7/8sp 31.8/34.9mm 20T 42T 

GS-200315 high (DS) top/bottom 7/8sp 31.8/34.9mm 20T 48T 

SRAM Red22 11sp Front Derailleur 

• Proprietary actuation ratio with ‘Yaw’ cage-angle shift technology that tracks 

with chain eliminating the need for shifter trim (only compatible with Red22 

SRAM road shifters and cranksets) 

• Hybrid construction with shift-engineered alloy-outer/steel-inner/compositetail 

cage optimized for X-GlideR chainrings in traditional and compact gearing 

• Includes optional and independently adjustable Chain Spotter that integrates 

with mount to eliminate chain drop and resulting frame damage 

• Braze-on design can be used with SRAM adapter clamps to fit 31.8/34.9mm 

frames if needed (available separately in derailleur parts) 

• 69g plus optional 11g Chain Spotter 


GS-8311 double 11sp braze-on 16T 53T grey/black anodized 

SRAM New-Red 10sp Front Derailleur 

• Proprietary actuation ratio with ‘Yaw’ cage-angle shift technology that tracks 

with chain eliminating the need for shifter trim (only compatible with New- 

Red SRAM road shifters) 

• Hybrid construction with shift-engineered alloy-outer/steel-inner/compositetail 

cage optimized for X-GlideR chainrings in traditional and compact gearing 



• Braze-on design can be used with SRAM adapter clamps to fit 31.8/34.9mm 

frames if needed (available separately in derailleur parts) 

• 74g plus optional 12g Chain Spotter 


GS-8310 double 10sp braze-on 16T 56T grey/silver/black 

GS-2985 

GS-2751 



SRAM 3.0 7/8sp Front Derailleur 

SRAM Red22 11sp Front Derailleur 


Front 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

SRAM New-Red 10sp Front Derailleur 

Wheels 

phone 800.558.8324 

533


Front 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

Wheels 

SRAM Force22 11sp Front Derailleur 

SRAM Force 10sp Front Derailleur 

SRAM Rival22 11sp Front Derailleur 

SRAM Rival 10sp Front Derailleur 

SRAM Apex 10sp Front Derailleur 

Sunrace M97 Front Derailleur 

SRAM 

SRAM Force22 11sp Front Derailleur 

• Features YAW technology, eliminating the need for trim 

• Optimized for use with 11sp Yaw drivetrains 



• Can be used with SRAM adapter clamps to fit 31.8/34.9mm frames if needed 

• 90g with included Chain Spotter 


GS-8350 double 11sp braze-on 16T 53T silver 

SRAM Force 10sp Front Derailleur 

• Proprietary actuation ratio (only compatible with SRAM road shifters) 

• Designed to optimize traditional and compact gearing shifts with a tuned and 

shaped cage profile 

• Forged aluminum body with an updated shift-engineered steel cage 

• Braze-on model can be used with SRAM adapter clamps to fit 31.8/34.9mm 

frames if needed (use GS-8308/8309): 83g (braze-on), 102g (clamp) 


GS-8315 double 10sp braze-on 16T 56T zepher-silver 

GS-8316 double 10sp 31.8mm 16T 56T zepher-silver 

GS-8317 double 10sp 34.9mm 16T 56T zepher-silver 

SRAM Rival22 11sp Front Derailleur 

• Yaw 22 derailleur rotates in line with the chain to optimize 



• Aluminum construction with shift-engineered steel cage 


frames if needed (use GS-8308/8309) 

• 88g with included Chain Spotter 


GS-8331 double 11sp braze-on 16T 56T black 

SRAM Rival 10sp Front Derailleur 


• Designed to optimize traditional and compact gearing shifts 





GS-8328 double 10sp braze-on 16T 56T black 

GS-8329 double 10sp 31.8mm 16T 56T black 

GS-8330 double 10sp 34.9mm 16T 56T black 

SRAM Apex 10sp Front Derailleur 


• Designed to optimize traditional and compact gearing shifts 





GS-8343 double 10sp braze-on 16T 56T white/silver 

GS-8340 double 10sp braze-on 16T 56T black/silver 

GS-8341 double 10sp 31.8mm 16T 56T black/silver 

GS-8342 double 10sp 34.9mm 16T 56T black/silver 

SUNRACE 

Sunrace M97 Front Derailleur 

• Triple compatible, suitable for most Shimano 3x9sp drivetrains 

• Dual pull design is convertible between top-pull and bottom-pull cable routing 

• For standard 66-69 degree chainstay/seat-tube angles 

part# clamp pull speed clamp dia. capacity max cs/st angle price 

UQ-3120 low top/bottom 3x9sp 28.6/31.8/34.9mm 22T 48T 66-69 deg 


Wheels 

BOX 

BOX 10sp Rear Derailleur 

• Cyclops front pivot with oversized pin directs shift forces directly to top pulley 

for powerful, crisp shifts 

• Super wide 30mm main link pivot for stiffness handles cable and spring 

tension for a smooth transition of shifting force 

• Spring loaded folding cable stay keeps cable housing out of harms way and 

resists impacts 

• Cage Clutch provides damping for quieter rides, improved chain control and 

reduced chain slap 

• Standard Max cog tooth: 36; Min cog tooth: 11 

• Wide-Range Max cog tooth: 44; Min cog tooth: 10 

part# speed cage min/max capacity weight color price 

BX-8200 NEW 10sp short 11/36 25T - gun metal 

BX-8210 NEW 10sp long (wide-range) 10/44 34T - gun metal 

CAMPAGNOLO 

Campagnolo Super Record EPS 11sp Rear Derailleur 

• EPS Electronic Power Shift electronic rear derailleur. This rear derailleur 

requires specific, separate EPS interface and power unit, battery pack, 

and shifters 

• Features alloy gear housing and special lightened anti-vibration pulleys with 

ceramic bearings for maximum smoothness 

• External carbon outer plate surrounds the technopolymer, carbon fiber upper 

and lower body a molded carbon cage 

• The optimized, oversized parallelogram operates with absolute precision 

• Activation is achieved through a main screw mechanism and a specially 

designed high torque motorized gear box 

• All EPS rear derailleurs feature an exclusive unlock, back home system that 

prevents damage in case of a crash 


CP-42010 11sp SS-short 11/29T 33T 198g carbon/black 

Campagnolo Super Record 11sp Rear Derailleur 

• Updated design is stiffer, smoother and functions even better than its predecessor 

• The new design of the external pieces allows the rear derailleur to move at a 

different angle and the new internal design will pull the chain closer to the 

cassette, enjoying the exact same performance whether using an 11-29 or 

11-23 cassette 

• Two-part alloy fixing bolt is 53% lighter than steel and 22% lighter than titanium 

• Specially lightened anti-vibration pulleys with ceramic bearings for 

maximum smoothness 



CP-42002 11sp SS-short 11/29T 31T 166g carbon 

Campagnolo Record EPS 11sp Rear Derailleur 

• EPS Electronic Power Shift electronic rear derailleur. This rear derailleur requires 

specific, separate EPS interface and power unit, battery pack, and shifters 

• Features steel gear housing and special lightened anti-vibration pulleys 


and lower body a molded carbon cage 








BOX 10sp Rear Derailleur 

Campagnolo Super Record EPS 11sp Rear Derailleur 

Campagnolo Super Record 11sp Rear Derailleur 


Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Campagnolo Record EPS 11sp Rear Derailleur 

Tubes & 

Tube Care 

phone 800.558.8324 

535


Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Campagnolo Record 11sp Rear Derailleur 

Campagnolo Record 11sp Rear Derailleur MY14 

Campagnolo Chorus EPS 11sp Rear Derailleur 

CAMPAGNOLO 

Campagnolo Record 11sp Rear Derailleur 

• Updated design is stiffer, smoother and functions even better than 

its predecessor 

• Outer carbon plate with carbon outer cage 







CP-42106 11sp SS-short 11/29T 31T 170g carbon 

Campagnolo Record 11sp Rear Derailleur MY14 

• The fulcrum of the 11-speed system. An absolute innovation 

• 11-speed parallelogram geometry operates with absolute precision 

• Black anodized forged aluminum upper body with oversized carbon fiber 

composite parallelogram link, which confers 150% greater torsional rigidity 

• Carbon fiber composite outer cage and light alloy inner cage with an updated 

black anodized alloy B-bolt 

• Specially lightened anti-vibration pulleys with ceramic bearings for 

maximum smoothness 

• Short cage (55mm pulley-pulley axle dimensions) Carbon and black with two 

color graphics 



Campagnolo Chorus EPS 11sp Rear Derailleur 

• EPS Electronic Power Shift electronic rear derailleur. This rear derailleur 

requires specific, separate EPS interface and power unit, battery pack, 

and shifters 


and lower body and molded carbon cage 








Campagnolo Chorus 11sp Rear Derailleur 

• Updated design is stiffer, smoother and functions even better than 

its predecessor 

• Outer carbon plate with light alloy cage 








Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

NEVER 

MORE THAN 

3 DAYS 

AWAY 

BTI automatically upgrades dealers in UPS zones 4-6 

to UPS 3Day Air service at economical Ground rates. 

Dealers in nearly half of the lower 48 states benefit 

from dramatically faster delivery on their orders. 

Order over $450 and the shipping is on us! 

Tubes & 

Tube Care 

Campagnolo Chorus 11sp Rear Derailleur 

Wheels 


Wheels 

GEVENALLE 

Gevenalle BURD Rear Derailleurs 

• BURD = Blatantly Upgraded Rebranded Derailleur 

• Chain tension spring is adjusted to provide 25% more force which provides 

an advantage over road derailleurs in keeping the chain planted on your 1/2X 

chain rings 

• Upgraded to Shimano’s excellent Ultegra level pulleys 

• Packed full of Phil Wood waterproof grease to give them the best 

protection possible 

• 28t max for 2x and 32t max for 1x use 

• Repair/crash replacement available through: gevenalle.com/support 


VG-2611 NEW 11sp medium 11/28T 33T 192g black 

VG-2610 NEW 9/10sp medium 11/28T 33T 192g black 

SRAM 

SRAM XX1 11sp Rear Derailleur 

• X-Actuation ratio specifically engineered for SRAM’s 1x11-speed 

mountain drivetrain 

• X-Horizon design aligns the parallelogram to a horizontal axis providing 

constant chain gap across all 11 gears resulting in fast, precise shifts with 

reduced shifter force 

• Type-2.1 (T2.1): self lubricating, roller bearing clutch mechanism provides 

one-way friction damping to cage improving chain stability and reducing 

chain-slap/noise, with an incorporated CageLock feature for faster wheel 

changes and chain service 

• X-Sync 12-tooth pulley design reduces noise and maximizes chain control 

by alternating wide/narrow teeth to mirror chain profile, while upper pulley 

offset maintains chain gap to cassette 

• Forged aluminum links, B-knuckle, and inner cage with a carbon fiber 

outer cage 

• Titanium, aluminum and stainless hardware with sealed, ceramic 

bearing pulleys 


GS-2505 NEW 11sp long 10/42T 32T 220g carbon/grey 

GS-2598 11sp long 10/42T 32T 220g black/carbon 

SRAM X01 11sp Rear Derailleur 






• Type-2 (T2): self lubricating, roller bearing clutch mechanism provides oneway 

friction damping to cage improving chain stability and reducing chainslap/noise, 

with an incorporated CageLock feature for faster wheel changes 

and chain service 




• Forged aluminum links, B-knuckle, and inner cage with a carbon fiber 

outer cage 

• Aluminum and stainless hardware with sealed cartridge bearing pulleys 


GS-2561 11sp long (T2) 10/42T 32T 252g black 

GS-2562 11sp long (T2) 10/42T 32T 252g red 

Gevenalle BURD Rear Derailleurs 

SRAM XX1 11sp Rear Derailleur 



Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

phone 800.558.8324 

537


Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 


SRAM GX1 1x11sp Rear Derailleur 

SRAM GX 2x11sp Rear Derailleur 

SRAM 














• Forged aluminum links, B-knuckle, and inner cage with an aluminum 

outer cage 


GS-2579 11sp long (T2) 10/42T 32T 256g black 

SRAM GX1 1x11sp Rear Derailleur 














GS-2526 NEW 1x11sp long 10/42T 32T 265g black 

GS-2527 NEW 1x11sp long 10/42T 32T 265g red 

SRAM GX 2x11sp Rear Derailleur 














GS-2506 NEW 2x11sp medium 10/42 44t 286g black 

GS-2507 NEW 2x11sp medium 10/42 44t 286g red 

GS-2528 NEW 2x11sp long 10/42 44t 289g black 

GS-2529 NEW 2x11sp long 10/42 44t 289g red 

BTI DATA FEED 

Qualified retailers can access BTI product data for use on 

eligible web stores. Apply for access to info@bti-usa.com 

Tubes & 

Tube Care 

Wheels 


Wheels 

SRAM 

SRAM X01 DH 10sp Rear Derailleur 

• X-Actuation ratio specifically engineered for SRAM’s 1x10-speed DH drivetrain 

• Compatible with SRAM/Shimano HG 10sp cassettes and SRAM 10sp 

mountain shifters 








• Forged aluminum links, B-knuckle, and inner cage with a carbon fiber outer cage 


• For frames that have less than 25mm of chain growth use the short cage 

version, for frames that have more than 25mm of chain growth use the 

medium cage 


GS-2522 10sp medium 11/28T 17T 263g black 

GS-2523 10sp medium 11/28T 17T 263g red 

GS-2524 10sp short 11/26T 15T 257g black 

GS-2525 10sp short 11/26T 15T 257g red 


• X-Actuation ratio specifically engineered for SRAM’s 1x7-speed DH drivetrain 








• X-Sync 12-tooth pulley design reduces noise and maximizes ground clearance 

• Forged aluminum links, B-knuckle, and inner cage with a carbon fiber outer cage 


• For frames that have less than 25mm of chain growth use the short cage 

version, for frames that have more than 25mm of chain growth use the 

medium cage 

• Requires X01 DH 7sp shifter/cassette and 11 speed XX1 chain 


GS-2567 7sp medium (T2) 10/24T 14T 263g black 

GS-2568 7sp medium (T2) 10/24T 14T 263g red 

GS-2569 7sp short (T2) 10/24T 14T 257g black 

GS-2578 7sp short (T2) 10/24T 14T 257g red 

SRAM XX 10sp Rear Derailleur 

• Exact Actuation ratio works with all SRAM mountain/road 10-speed shifters 

• Di.R.T (Direct Route Technology) for light-effort shifting performance 

• Forged magnesium inner link with a forged aluminum outer link and 

B-knuckle, plus a Grilon composite P-knuckle 

• Titanium and aluminum Torx-T25 hardware and a titanium parallelogram 

return spring 

• Carbon fiber outer and inner cage with sealed, ceramic bearing pulleys 


GS-2654 10sp long (93mm) 11/36T 40T 180g silver/carbon 

GS-2655 10sp medium (80mm) 11/36T 38T 170g silver/carbon 




Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

SRAM XX 10sp Rear Derailleur 

Tubeless 

Systems 

Tubes & 

Tube Care 

phone 800.558.8324 

539


Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

SRAM X0 Type-2 10sp Rear Derailleur 



SRAM 

SRAM X0 Type-2 10sp Rear Derailleur 


friction damping to cage improving chain stability and reducing 

chain-slap/noise 

• T2 system also incorporates a CageLock feature to promote easy wheel changes 



• Forged aluminum inner/outer links with an aluminum B-knuckle and bolt, 

Grilon composite P-knuckle, and stainless/aluminum hardware 

• Carbon fiber outer cage with a forged aluminum inner cage and sealed 

bearing pulleys for expanded-range 2/3x10 drivetrains 


GS-2996 10sp long (99mm) 11/36T 47T 230g silver/black/carbon 

GS-2993 10sp long (99mm) 11/36T 47T 230g black/black/carbon 

GS-2877 10sp long (99mm) 11/36T 47T 230g red/black/carbon 

GS-2997 10sp medium (75mm) 11/36T 39T 220g silver/black/carbon 

GS-2994 10sp medium (75mm) 11/36T 39T 220g black/black/carbon 

GS-2878 10sp medium (75mm) 11/36T 39T 220g red/black/carbon 

GS-2998 10sp short (55mm) 11/36T 25T 210g silver/black/carbon 

GS-2995 10sp short (55mm) 11/36T 25T 210g black/black/carbon 

GS-2879 10sp short (55mm) 11/36T 25T 210g red/black/carbon 




• Forged aluminum inner/outer links with an aluminum B-knuckle and bolt, 

Grilon composite P-knuckle, and stainless/aluminum hardware 

• Carbon fiber outer cage with a forged aluminum inner cage and sealed 

bearing pulleys for expanded-range 2/3x10 drivetrains 


GS-2860 10sp long (99mm) 11/36T 47T 199g black/black/carbon 

GS-2863 10sp long (99mm) 11/36T 47T 199g red/black/carbon 

GS-2873 10sp medium (75mm) 11/36T 39T 189g silver/black/carbon 

GS-2861 10sp medium (75mm) 11/36T 39T 189g black/black/carbon 

GS-2864 10sp medium (75mm) 11/36T 39T 189g red/black/carbon 


• ESP compatible (1:1 actuation ratio) for ESP trigger or twist shifters 


• Forged alloy links and B-knuckle with Grilon composite P-knuckle 

• Titanium hardware and parallelogram return spring 

• Heat-treated, oversized pivot pins and sealed cartridge bearing pulleys 

• Carbon fiber outer cage with alloy inner cage (all models) 

• 8/9-speed compatible with top-normal resting position 


GS-2716 8/9sp long 11/34T 45T 210g silver/carbon/black 

GS-2717 8/9sp medium 11/34T 37T 195g silver/carbon/black 

GS-2718 8/9sp short 11/34T 23T 190g silver/carbon/black 


• Updated X0-style design with a slimmer and lighter profile over previous X9 


• Compatible with ESP (1:1 ratio) trigger and twist shifters 

• Aluminum inner/outer links, alloy inner/outer cage (composite on short cage 

model), steel tension spring, and a forged alloy B-knuckle with alloy bolt 

• Hardened pivots, ported 11-tooth pulleys, and a polished alloy finish 


GS-2728 8/9sp long 11/34T 45T 215g silver/grey/black 

GS-2729 8/9sp medium 11/34T 37T 205g silver/grey/black 

GS-2730 8/9sp short 11/34T 23T 190g silver/grey/black 

Tubes & 

Tube Care 

Wheels 



SRAM 

SRAM GX Type-2.1 10sp Rear Derailleur 

• Type 2.1 (T2.1) derailleurs feature a roller bearing clutch for damping and 

cage lock for easy wheel changes 



• 36-tooth cassette capacity 


GS-3086 NEW 10sp long 11/36t 47t 302g black 

GS-3087 NEW 10sp medium 11/36t 39t 289g black 

GS-3088 NEW 10sp short 11/36t 25t 273g black 



• Compatible with ESP (1:1 ratio) trigger and twist shifters 

• Alloy inner/outer cage, aluminum outer/steel inner links, Grilon composite 

P-knuckle, steel tension spring, and an alloy B-knuckle with alloy bolt 

• Hardened pivots and ported 11-tooth pulleys 


GS-2731 9sp long 11/34T 45T 235g storm grey 

GS-2732 9sp medium 11/34T 37T 225g storm grey 

GS-2733 9sp short 11/34T 23T 215g storm grey 

SRAM GX Type-2.1 10sp Rear Derailleur 


Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 




• Steel outer/inner cage, aluminum outer/steel inner links, Grilon composite 

P-knuckle, steel tension spring, and an alloy B-knuckle with steel bolt 

• Hardened pivots and ported 11-tooth pulleys 


GS-2831 10sp long (99mm) 11/36T 47T 290g black/black 

GS-2833 10sp medium (75mm) 11/36T 39T 275g black/black 


Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

SRAM X5 8/9sp Rear Derailleur 



• Alloy outer link and B-knuckle with Grilon composite P-knuckle 

• Steel cage with serviceable precision pulleys 

• 8 and 9-speed compatible 


GS-2856 8/9sp long 11/34T 45T 290g black/black 

GS-2857 8/9sp long 11/34T 45T 290g silver/black 

GS-2858 8/9sp medium 11/34T 37T 275g black/black 

GS-2859 8/9sp medium 11/34T 37T 275g silver/black 


Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 




• Alloy outer link and B-knuckle with Grilon composite P-knuckle 

• Steel/composite cage with replaceable pulleys 

• 7/8-speed compatible with top-normal resting position 


Pedals 

Rims 

Saddles 

Seatposts 


GS-2759 7/8sp long 11/34T 45T 310g black 

Shifters 




• Composite and steel links with a Grilon composite B-knuckle and P-knuckle 

• Steel/composite cage with replaceable, mud-ported pulleys 


GS-2855 7/8sp long 11/34T 45T 210g black 


Spokes 

Stems 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 


Wheels 

phone 800.558.8324 

541


Rear 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

SRAM Red22 11sp Rear Derailleur 

SRAM New-Red 10sp Rear Derailleur 

SRAM Force22 11sp Rear Derailleur 

SRAM Force CX1 11sp Rear Derailleur 

SRAM 

SRAM Red22 11sp Rear Derailleur 

• Exact Actuation cable pull ratio for super-precise shifting in conjunction with 

ZeroLoss shifters 

• Carbon fiber cage and inner link, titanium hardware, and AeroGlide ceramic 

bearing pulleys 

• Polished aluminum outer links with integrated, spring-fixed barrel adjuster 

• Short cage has extended B-Knuckle for improved clearance with 28t cassettes 

part# speed cage min/max weight color price 

GS-8410 11sp short 11/28T 145g carbon/grey/silver/black 

GS-8411 11sp medium 11/32T 166g carbon/grey/silver/black 

SRAM New-Red 10sp Rear Derailleur 

• Exact Actuation cable pull ratio for super-precise shifting in conjunction with 

ZeroLoss shifters (compatible with all SRAM road or 10sp-mountain shifters) 

• Carbon fiber cage and inner link, alloy B-knuckle, titanium hardware, and 

AeroGlide ceramic bearing pulleys 

• Polished aluminum outer links with integrated, spring-fixed barrel adjuster 

• WiFli model (wider, faster, lighter): wide-range, yet compact 2x10 system with 

the gear range of most triple setups 


GS-8403 10sp short 11/28T 145g carbon/grey/silver/black 

GS-8404 10sp medium (WiFli) 11/32T 165g carbon/grey/silver/black 

SRAM Force22 11sp Rear Derailleur 

• Exact Actuation cable pull ratio offers super-precise 11 speed shifting (only 

compatible with SRAM road 11sp shifters) 

• Carbon fiber cage, magnesium inner link, and aluminum B-knuckle 

• Spring barrel adjuster delivers incremental cable adjustment and 

impact durability 

• Features Aero Glide Pulleys for reduced drive train noise 


GS-8420 11sp short 11/28T 178g carbon/zepher-silver 

GS-8421 11sp medium (WiFli) 11/32T 185g carbon/zepher-silver 

SRAM Force CX1 11sp Rear Derailleur 

• Specifically engineered for SRAM’s 1x11-speed cyclocross drivetrain 



• X-Horizon parallelogram design limits all movement to the horizontal axis, 

which makes ghost shifting impossible while also reducing shift force 

• CageLock technology makes wheel removal and installation faster and simpler 


• Spring barrel adjuster delivers incremental cable adjustment and 

impact durability 

• Features Aero Glide Pulleys for reduced drive train noise 


GS-8422 11sp medium 11/32T 252g grey 

GS-8423 NEW 11sp long 10/42t 262g grey 

SRAM Force 10sp Rear Derailleur 


compatible with SRAM road or 10sp-mountain shifters) 


• AeroGlide pulleys for a smoother, quieter ride (upgradable to BlackBox 

ceramic pulleys with separate kit) 

• Polished aluminum outer link and B-knuckle with an integrated 

barrel adjuster 




GS-8417 10sp short 11/28T 170g carbon/zepher-silver 

GS-8418 10sp medium (WiFli) 11/32T 185g carbon/zepher-silver 

Tubes & 

Tube Care 

Wheels 

SRAM Force 10sp Rear Derailleur 


SRAM 


SRAM Rival1 T2.1 11sp Rear Derailleur 

• Medium cage compatible with 11-26 through 11-36 cassettes 

• Long cage designed to be used with 10-42 XD cassettes 



• Only compatible with 1x11 SRAM road drivetrains 

• Aluminum cage with sealed cartridge pulley bearings 

Rear 


GS-8401 NEW 1x11sp medium 11-36 269g black/silver 

GS-8402 NEW 1x11sp long 10-42 278g black/silver 

SRAM Rival22 11sp Rear Derailleur 

• Configured to maximize shifting performance in the extended range of 22 gears 

• Only compatible with SRAM 11-speed road shifters 

• Aluminum cage, inner/outer links, and B-knuckle with integrated barrel adjuster 




GS-8434 11sp short 11/28T 180g black/silver 

GS-8435 11sp medium (WiFli) 11/32T 191g black/silver 

SRAM Rival1 T2.1 11sp Rear Derailleur 

SRAM Rival22 11sp Rear Derailleur 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

SRAM Rival 10sp Rear Derailleur 



• Aluminum cage, inner/outer links, and B-knuckle with integrated barrel adjuster 



SRAM Rival 10sp Rear Derailleur 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


GS-8428 10sp short 11/28T 185g black/black 

GS-8429 10sp medium (WiFli) 11/32T 195g black/black 


SRAM Apex 10sp Rear Derailleur 



• Aluminum cage, inner link, and B-knuckle with integrated barrel adjuster 



SRAM Apex 10sp Rear Derailleur 

Fasteners 

Forks & 

Shocks 

Grips & Tape 


GS-8432 10sp short 11/28T 200g diamond white 

GS-8430 10sp short 11/28T 200g jet black 

GS-8433 10sp medium (WiFli) 11/32T 210g diamond white 

GS-8431 10sp medium (WiFli) 11/32T 210g jet black 

Handlebars 

Headsets 

Hubs 

SRAM DualDrive 24 8sp Rear Derailleur 

• For use with SRAM Dualdrive rear hub (GS-4880) and shifter (GS-8199) 


GS-8480 8sp short 11/32T 265g silver 

SRAM DualDrive 24 8sp Rear Derailleur 

Pedals 

Rims 

SUNRACE 

Saddles 

Seatposts 

Sunrace M97 9sp Rear Mtn Derailleur 

• 2:1 actuation ratio, compatible with most Shimano 3x9sp drivetrains 

• Aluminum and steel construction with 11-tooth pulleys, barrel adjuster 

Shifters 

Spokes 

part# model speed cage min/max capacity weight color price 

UQ-3632 M97 9sp long 11/34T 45T 335g black/grey 

Stems 

Sunrace M57 8sp Rear Derailleur 

• 2:1 actuation ratio, compatible with most Shimano 3x8sp drivetrains 

• Aluminum and steel construction with 11-tooth pulleys, barrel adjuster 

part# model speed cage min/max capacity weight color price 

UQ-3641 M57 8sp long 11/34T - 355g black 

Sunrace M97 9sp Rear Mtn Derailleur 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

Sunrace M57 8sp Rear Derailleur 

Wheels 

phone 800.558.8324 

543


Parts 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Absolute Black XX1 Derailleur Pulleys 

Campagnolo Derailleur Pulleys and Screws 

Campagnolo Rear Derailleur Service Parts 

Campagnolo Front Derailleur Service Parts 

Campagnolo Front Derailleur Braze-On Adapter 

ABSOLUTE BLACK 

Absolute Black XX1 Derailleur Pulleys 

• Machined Delrin pulleys to fit XX1, X01, X1, and Force CX1 rear derailleurs 

• Super light Delrin wheels spinning on 606 2RS stainless bearings with 7075 T6 

dust covers 

• XD-11 pulleys have narrow/wide tooth profile to aid shifting precision 

• Sold as pair (22g/pair) 

part# model description color price 

AI-4801 NEW SRAM XD-11 (XX1/X01/X1/CX1) stainless bearing pulley set black 

CAMPAGNOLO 

Campagnolo Derailleur Pulleys and Screws 

• Upper guide and lower tension pulleys for Campagnolo rear derailleurs 

• Fixing screws sold separately 

part# model upper/lower width price 

CP-43005 09-13 SR, 11-13 Re 11sp upper and lower 8.4mm 

CP-43205 09-13 Chorus, Athena 11sp upper and lower 8.4mm 

CP-43115 Record, Chorus, Centaur 10sp upper and lower 8.4mm 

CP-43415 9 speed upper and lower 8.8mm 

CP-43009 09-15 11sp Super Record, Record pulley bolts (pair) 8.4mm 

CP-43209 11-14 Chorus11sp pulley bolts (pair) 8.4mm 

CP-43119 Record 10sp pulley bolts (pair) 8.4mm 

Campagnolo Rear Derailleur Service Parts 

• Indexed ratchet needed for converting Campagnolo 11-speed rear derailleurs 

with 27-tooth maximum tooth capacity to 29-tooth maximum tooth capacity 

to work with 12-29 cassettes 

part# model description package price 

CP-43025 27T max 11sp rear derailleur indexed ratchet each 

Campagnolo Front Derailleur Service Parts 

• EPS specific front derailleur nut and washer 

part# model description package price 

CP-93318 Super Record, Record, Athena EPS front derailleur nut and washer each 

Campagnolo Front Derailleur Braze-On Adapter 

• Hinged band clamp for fitting braze-on front derailleurs on frames without 

braze-on mount 

• Aluminum construction 

part# model size color price 

CP-95107 Record 31.8mm (1-1/4”) black 

CP-95109 Record 34.9mm (1-3/8”) black 

CINELLI 

Cinelli Braze-On Front Derailleur Adapter 

• Hinged clamp design for use with braze-on derailleurs on frames without 

braze-on mount 

• CNC machined aluminum construction with laser-etched Cinelli logo and a 

pivoting barrel-nut to prevent bolt seizing and provide a uniform clamping force 

part# description clamp price 

CN-9649 braze-on derailleur clamp 34.9-35.5mm 

Tires 

Tubeless 

Systems 

Stems 

Tubes & 

Tube Care 

Cinelli Braze-On Front Derailleur Adapter 

Wheels 


Wheels 

ENDURO 

Enduro Zer0 Ceramic Bearing Pulleys 

• Ceramic bearings provide superior smoothness, reduced weight and 

extended bearing life 

• Grade 5 Silicon Nitride ceramic balls, Chromium steel races with triple 

cryogenic treatment, filled with Kyodo Yushi grease for ceramic bearings 

• Super light Delrin wheels with aluminum dust covers 

• XD-11 pulleys have narrow/wide tooth profile for use on XX1 and X01 

rear derailleurs 

• Sold as pair (16g/pair) 


AB-0002 Shimano 11 speed ceramic bearing pulley set black 

AB-0003 Shimano 11 speed ceramic bearing pulley set red 

AB-0005 SRAM road 11 speed (SRAM 22) ceramic bearing pulley set red 

AB-0006 SRAM XD-11 (XX1 and X01) ceramic bearing pulley set black 

AB-0007 SRAM XD-11 (XX1 and X01) ceramic bearing pulley set red 

AB-0014 Shimano 9/10 speed ceramic bearing pulley set black 

AB-0016 Shimano 9/10 speed ceramic bearing pulley set red 

Enduro Cyclocross Ceramic Bearing Pulleys 

• Ceramic bearings provide superior smoothness, reduced weight and 

extended bearing life 

• Cyclocross specific pulleys do not have the divots found on the Zero Ceramic 

pulleys. This helps them avoid collecting mud, grass and other debris 

• Ceramic hybrid bearings 

• Super light Delrin wheels with aluminum dust covers 

• Sold as pair 


AB-0021 Shimano 9/10/11 speed CX specific ceramic bearing pulley set red 

AB-0023 SRAM 9/10/11 speed CX specific ceramic bearing pulley set red 

FSA 

FSA Front Derailleur Braze-On Clamp 

• Adapts braze-on front derailleurs to fit on frames without braze-on mount 

part# size color price 

FS-2015 34.9mm (1-3/8”) black 

FSA Front Derailleur Shim 

• Correct fitment of larger 31.8mm front derailleur to 28.6mm seat tubes 

part# adapts package price 

FS-2017 28.6 to 31.8mm each 

FSA Ceramic Bearing Pulleys 

• Upgrade rear derailleur pulleys with ceramic sealed cartridge bearings 

• Ceramic bearings are proven harder and smoother than standard bearings 

• PTFE/composite pulley material for long life and low friction 

• Shimano version works for Road or MTB. Sold as pair. 9g each 


FS-2095 Shimano ceramic bearing pulley set red 

Enduro Zer0 Ceramic Bearing Pulleys 

Enduro Cyclocross Ceramic Bearing Pulleys 

FSA Front Derailleur Braze-On Clamp 

FSA Front Derailleur Shim 


Parts 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

INTERLOC RACING DESIGN 

IRD Front Derailleur Braze-On Clamp 

• Adapts braze-on front derailleurs to fit on frames without braze-on mount 

• Hinged clamp 

part# size color price 

RD-2803 28.6mm silver 



FSA Ceramic Bearing Pulleys 

IRD Front Derailleur Braze-On Clamp 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

phone 800.558.8324 

545


Parts 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Kogel Bearings Hybrid Ceramic Bearing Pulleys 

Lindarets x Wolf Tooth GoatLink 

SERVICE PARTS COMMITMENT 

KOGEL BEARINGS 

Kogel Bearings Hybrid Ceramic Bearing Pulleys 

• Lightweight, smooth, and fast rolling aluminum derailleur pulleys with 

ceramic bearings 

• Grade 3, ABEC 5 hybrid ceramic bearings 

• CNC’d aluminum pulley wheels with blue anodized dust covers 

• Compatible with 11-speed Shimano, SRAM, and Campagnolo and include 

washers to make them compatible with 10-speed Shimano and SRAM 

• 2yr warranty with annual bearing service. See BTI part# KB-009x 

• Sold as pair 


KB-6100 NEW 10/11sp Shimano/SRAM/ hybrid ceramic black/blue 

11sp only for Campy 

bearing pulley set 

LINDARETS 

Lindarets x Wolf Tooth GoatLink 

• Shimano derailleur adapter conceived by Lindarets, made by 

Wolf Tooth Components 

• Improves long-term shifting performance on wide-range one-by-ten drivetrains 

• Increases chain wrap (69% for 40t, 53% for 42t), eliminates the need to 

drastically thread in the b-tension screw 

• Replaces the Direct Mount link on 2013 or later Shimano 10-speed Shadow+ rear 

derailleurs to increase chain wrap and reduce premature shifting degradation 

• GoatLink 10sp works with any 11-40t or 11-42t 10-speed cassette (optimized 

for Wolf Tooth’s Giant Cogs) 

• RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t 

cassettes and works great with Wolf Tooth’s 40-tooth Giant Cogs and Drop-Stop 

chainrings. The Roadlink is compatible with Shimano ten- or eleven-speed road 

derailleurs and shifters, and can be used with single or double chainrings 

• GoatLink 11sp provides ideal performance from SRAM 10-42t XD cassettes 

and wide-range capability for bigger days. See www.wolftoothcomponents. 

com for compatability notes 

• Installs in moments with little more than a 5mm Allen wrench 

• Fits derailleurs with 8mm Direct Mount intermediate link that mounts 

to standard derailleur hangers. Direct Mount-native frames, SRAM rear 

derailleurs are not supported. Results may vary 

• 19g 

part# description price 

WQ-3725 NEW GoatLink, 11sp Shimano Shadow+ 

WQ-3721 NEW 

WQ-3723 NEW 

GoatLink, 10sp Shimano Shadow+ 

RoadLink, 10sp Shimano Shadow+ 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

Taking care of customers with great post-sale service is key 

to building customer loyalty. BTI makes it a priority to stock 

replacement and repair parts for the components we sell. Please 

let us know if there is a part you need that BTI doesn’t stock and 

we will try to source it. 

AT $ 

450 

Wheels 


SRAM 

SRAM Derailleur Service Parts 

• B-bolt/axle kit include: aluminum B-bolt/axle, dust shield, and ring clip 

part# model description price 

GS-7709 08-11 Red B-bolt/axle kit 

GS-7721 ‘New’ Red B-bolt/axle kit 

GS-7722 Red22 B-bolt/axle kit 

GS-7885 XX1, X01, X1 X-Sync 11sp B-bolt/axle kit 

GS-7853 2015 CX1 B-bolt/axle kit 

GS-7708 08-12 Force, Rival, Apex B-bolt/axle kit 

GS-7868 X9/X0 Type-2 B-bolt/axle kit 

GS-7890 ‘10 XX B-bolt/axle kit 

GS-7889 ‘09/10 X.0 B-bolt/axle kit 

GS-7892 ‘06-08 X0 B-bolt/axle kit 

GS-7899 ‘07-09 X9 B-bolt/axle kit 

GS-7888 ‘10/11 (9sp) X.9, X.7 B-bolt/axle kit 

GS-7850 X01/X01DH X-Sync 7,10 and 11speed B-bolt limit screw kit 

GS-7852 X01/X01DH X-Sync 7,10 and 11speed cable pulley and guide kit 

GS-7883 XX1 X-Sync 11speed cable pulley and guide kit 

GS-7851 X01/X01DH X-Sync 7,10 and 11speed cable anchor bolt and washer 

GS-7884 XX1 X-Sync 11speed cable anchor bolt and washer 

GS-7854 Rival22 11speed cable anchor bolt and washer 

GS-7857 Type2, XX1/X0/X9/X7 cage lock with spring 

GS-7711 ‘08-11 Red barrel adjuster kit 

GS-7720 ‘New’Red/Red22/Force22 barrel adjuster kit 

GS-7856 2015 Rival22 barrel adjuster kit 

GS-7712 ‘07-13 Force,Rival,Apex barrel adjuster kit 

SRAM Derailleur Pulley and Cage Kits 

• Derailleur pulley set includes upper and lower pulleys with bearing plates 

• Derailleur cage assemblies include inner cage, pulleys, and tension spring 

part# model description price 

GS-7896 ‘10+ XX rear derail cage kit, SGS/long (carbon) 

GS-7880 ‘06-10 X0 rear derail cage kit, SGS/long (alum/carbon) 

GS-7881 ‘06-10 X0 rear derail cage kit, GS/medium (alum/carbon) 

GS-7882 ‘06-10 X0 rear derail cage kit, SS/short (alum/carbon) 

GS-7846 X01 X-Sync 11speed rear derail cage kit, X-Sync pulleys 

GS-7879 XX1 X-Sync 11speed rear derail cage kit, X-Sync pulleys 

GS-7872 X0 (Type-2) rear derail cage kit, SGS/long (aluminum) 

GS-7873 X0 (Type-2) rear derail cage kit, GS/medium (aluminum) 

GS-7874 X0 (Type-2) rear derail cage kit, SS/short (aluminum) 

GS-7869 X9 (Type-2) rear derail cage kit, SGS/long (aluminum) 

GS-7870 X9 (Type-2) rear derail cage kit, GS/medium (aluminum) 

GS-7871 X9 (Type-2) rear derail cage kit, SS/short (aluminum) 

GS-7719 Red,Force,Rival(10+11sp) (BlackBox) AeroGlide ceramic bearing pulley set 

GS-7891 ‘10+ XX, ‘08+ X0 (‘07+ X9, 

‘08+ X7 short cage) 

(BlackBox) ceramic bearing pulley set 

GS-7886 XX1 X-Sync 11speed (BlackBox) hybrid ceramic bearing pulley set 

GS-7849 

X1/X01/X01DH (7,10 and 

11spd) 

derailleur pulley set 

GS-7859 NEW Force 22 derailleur pulley set 

GS-7897 ‘08-10 X0 derailleur pulley set 

GS-700733 ‘02-07 X0 + (‘07+ X9, 

‘08+ X7 short cage) 

derailleur pulley set 

GS-7877 ‘13/14 XO Type2 derailleur pulley set 

GS-700713 ‘04 X9, ‘01-03 9.0+SL derailleur pulley set 

GS-7887 10-11, X9, X7 derailleur pulley set 

GS-7715 ‘07-13 Force,Rival,Apex derailleur pulley set 

GS-700615 ‘04 X9, ‘01-03 9.0+SL derailleur pulley set 

GS-7876 ‘13/14 XO Type2 derailleur pulley set 

GS-700718 ‘04-09 X7, ‘06-10 X5/SX5 derailleur pulley set 

Does not fit 08/09 (OEM) short, composite-cage X.7 rear derailleur, use GS-700733 

GS-7709 

GS-7890 

GS-7852 

SRAM Derailleur Service Parts 

GS-7880 

GS-700718 


Parts 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Hubs 

Pedals 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Stems 

Tires 

Tubeless 

Systems 

GS-7871 

Tubes & 

Tube Care 

SRAM Derailleur Pulley and Cage Kits 

Wheels 

phone 800.558.8324 

547


Parts 

Bearings 

Brakes 

Cables & 

Casing 

Cassettes & 

Freewheels 

Chains & 

Guides 

Chainrings 

& Guards 

Cranks & 

Btm Brackets 


Fasteners 

SRAM Front Derailleur Braze-On Adapter 

Wheels Front Derailleur Shim 

Wolf Tooth 25mm B-Screw 

SRAM 

SRAM Front Derailleur Braze-On Adapter 

• Hinged band clamp designed for use with braze-on front derailleurs on 

frames without derailleur braze-on/mount 

• Includes stop for optional ChainSpotter arm to help prevent chain-drop 

• Shot-peened and anodized, forged aluminum construction 

• For use with all front, braze-on mount SRAM road derailleurs 

part# description color clamp dia. price 

GS-8320 braze-on adapter clamp w/ChainSpotter stop black 31.8mm 

GS-8332 ChainSpotter arm with washer black clamp not included 

GS-8321 braze-on adapter clamp w/ChainSpotter stop black 34.9mm 

WHEELS MFG 

Wheels Front Derailleur Shim 

• Allows matching odd size derailleurs to most frame sizes 

part# adapts price 

WZ-1101 25.4 to 28.6mm 

WZ-1102 

28.6 to 31.8mm 

WOLF TOOTH 

COMPONENTS 

Wolf Tooth 25mm B-Screw 

• Longer B-screw needed when using 40t or 42t cog with most 

Shimano derailleurs 

part# description price 

WQ-2299 M4x25mm stainless B-screw for Giant Cog 

Tires 

Tubeless 

Systems 

Tubes & 

Tube Care 

Stems 

Rims 

Saddles 

Seatposts 

Shifters 

Spokes 

Hubs 

Pedals 

Forks & 

Shocks 

Grips & Tape 

Handlebars 

Headsets 

Wheels 

Are you pining for some narrow wide chainrings? BTI has many to choose from!

Derailleurs

Create successful ePaper yourself

Delete template?

Save as template?