catamaran accessories - Columbus Sailing Club

TRAPEZE RINGS, HANDLES & ACCESSORIES
D
A
A. NYLON TRAP HANDLE
A contoured safety grip and a wire guide prevent
hand contact with wire. A recessed cavity in the
base holds the nicropress oval and shields the
sailor from sharp wire ends. Each.
27-0412 $4.60
B. RONSTAN TRAP HANDLE
Add color and comfort
with Ronstan's molded
nylon trapeze handle.
Skipper and crew's trapeze
can be color-coded for
easy identification. Green has been discontinued
by the manufacturer. Each.
21-0171R Red $9.85
21-0171B Blue $9.85
C. REPLACEABLE TRAP HANDLE
Foam-covered aluminum handle is easily
installed onto existing trapeze wire. Carry a spare
as a temporary repair, then replace the wire at
your convenience. Each.
07-2010 $20.95
If a trapeze handle has been broken,
a single trapeze wire can be purchased.
Please refer to page 52.
“KEY-HOLE” CONNECTORS
& SPREADERS
For safety-minded sailors, the low
profile Key-Hole system offers many
advantages over the traditional hook
design. Choose from three different
connector types.
See page 46 for complete details.
Trapeze Harnesses .....................pg 44-47
Trapeze Adjustment Kits ......................49
Trapeze Wires ...........................................52
E
B
F
C
D. CAN'T HURT
A light and flexible alternative to “hard” stainless
steel dogbones. Black high pressure nylon tubing
covers 1/8" (1x19) stainless wire. Pair.
01-0123 $18.50
E. CAN'T MISS
Designed to allow
the sailor to hook-up
without even looking
at his trapeze hook.
This lightweight, extra-wide hook-up ring has a
center-hold handle with molded finger ridges.
Double swaged 1/8" (1x19) wire is coated with
black or clear high pressure nylon tubing. Pair.
01-0124BK Black $26.00
01-0124CL Clear $26.00
F. DOGBONE
Original equipment for Hobie ® trapeze systems.
6" long with 1-1/2" rings. Each.
25-3610 $15.25
G. 7-1/2" ELONGATED RING
Easy-to-hold short keyhole with two adjustment
positions. 7-1/2" long with 1-7/8" ring. Each.
25-3620 $12.00
G
ROPE LOCK
Easy-to-adjust
black rope stop
and lock for
trapeze height
adjustment.
Standard on
Hobie ® , Nacra
and Prindle.
Double-up backto-back
for extra strength. Each.
01-0120 $2.25
CLAMCLEAT ® WITH ROLLER
Allows for 2:1 trapeze adjustment while hooked
up. Line rolls easily on large base roller. 1/4" line
capacity. Each.
27-0253 $25.60
RONSTAN BACK-TO-BACK BLOCKS
As used on the Murrays No-Cut Hi-Low Trapeze
Adjustment Kit. Ball bearing blocks with 3/4"
sheaves and 1/4" maximum line diameter. Max.
working load is 550 lbs.; breaking strength is
1210 lb. Each.
21-2028 $21.75
SMALL BULLET BLOCK
As used in our No-Cut EZ-Up Trap Ring Return
Kit. 1-3/16" sheave, Teflon ® bearing. 5/16" line
capacity. Each.
23-0911 Small Bullet Block $7.00
23-0912 with Removable Sheave $8.50
HARKEN ® MICRO SINGLE BLOCK
A premium quality block for your trapeze return
system. Either swage in place or hang with
#21-0615 shackle. Block has 7/8" sheave, Delrin
ball bearings and 1/4" maximum line capacity.
Safe working load is 200 lbs.; breaking strength
is 1200 lbs.
28-0224 $10.10
NACRA CROSSBAR END CAP
This PVC crossbar cap protects the crew and
gives a finished appearance. Use on the rear
crossbar as is or drill to accommodate shock cord
on front crossbar.
56-3503 $27.50
Team Alexander
48 CATAMARAN ACCESSORIES 800-786-7245 www.murrays.com Prices & specifications are subject to change