METER
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Meter<br />
Boxes<br />
Cast Iron Base Meter Boxes<br />
11/12
Table of Contents<br />
Page<br />
General Information.....................................................2-3<br />
Series 775 Yokebox<br />
5/8" or 5/8" x 3/4" Meter.........................................4-5<br />
1" Meter......................................................................6-7<br />
Series 776 Longbox<br />
5/8" or 5/8" x 3/4" Meter.........................................8-9<br />
Page<br />
Series 777 "CR" Box<br />
5/8" or 5/8" x 3/4" & 1" Meter............................ 10-11<br />
Accessories<br />
Lids & Parts.................................................................12<br />
A.Y. McDonald Mfg. Co. Meter Boxes are complete, compact meter-setting packages, which are installed as a unit.<br />
They are the ideal water meter housing for moderate and warm climates. Meter Boxes provide automatic alignment for the<br />
water meter, which can be inserted any time during or after installation.<br />
The body and lid are made of durable cast iron (ASTM A-48, Class 25 minimum) to provide many years of trouble-free<br />
service. The inlet, outlet, and expansion connection are manufactured of brass and meet or exceed the current AWWA<br />
Standard C800. All dual check valves are ASSE 1024 approved.<br />
775 Series Yokebox<br />
Yokeboxes are more compact. An inline<br />
dual check valve may be integral to the<br />
yokebox or installed outside the yokebox.<br />
776 Series Longbox<br />
Longboxes include an inline dual check<br />
valve inside the box.<br />
Common Meter Box Installation<br />
2 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
11-12
General Information<br />
Installation<br />
Correct<br />
Incorrect<br />
1. Backfill to make certain the grade is level with the top of the box. This will help avoid a tripping hazard.<br />
2. Lock lid securely into place. Locking style lids are preferred to prevent unauthorized removal which could create a safety hazard. If a<br />
lockless style lid is used, make certain it fits properly into the frame and is not subject to sliding or tipping out of position. A.Y.<br />
McDonald lockless lids have extra long alignment lugs to deter improper lid placement.<br />
3. Lids and boxes are designed as a unit. Components are not interchangeable with other manufacturer's products. A.Y. McDonald is not<br />
responsible for users replacing or interchanging meter box lids with other manufacturers products.<br />
4. Check periodically to ensure correct operation of locking devices and to make sure the lid remains at ground level.<br />
Expansion Connection<br />
Longboxes and yokeboxes include a handwheel style expansion connection,<br />
eliminating the need for a wrench during meter changeouts.<br />
Plug Valve Features<br />
The plug valve holds the plug in place using a drive pin and a spring<br />
washer. An o-ring provides additional leakage protection. Angle valves<br />
are 60° from horizontal. A variety of inlet and outlet couplings are<br />
available for copper or plastic tubing, PVC, PE, or iron pipe. Plug<br />
valves are rated to 100 PSI.<br />
Tee head - padlock plate and<br />
lock can be attached<br />
O-ring seal<br />
Ball Valve Features<br />
The ball valve features a solid one piece tee-head and stem. An<br />
o-ring in the stem assures a watertight seal at the top. Molded<br />
rubber seats support the ball. The PTFE flurocarbon coated brass<br />
ball will provide years of maintenance free service. A variety of inlet<br />
and outlet couplings are available for copper or plastic tubing, PVC,<br />
PE, or iron pipe. Ball valves are rated 300 PSI.<br />
Gasket<br />
One piece tee<br />
head and stem<br />
O-ring in stem<br />
O-ring seal<br />
T Series compression nut<br />
Meter<br />
support<br />
saddle<br />
Copper<br />
flare nut<br />
Meter<br />
support<br />
saddle<br />
Meter<br />
support<br />
saddle<br />
EPDM Port<br />
Seals<br />
PTFE Fluorocarbon<br />
coated brass ball<br />
11-12 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
3
Series 775 Yokebox<br />
SERIES 775<br />
5/8" or 5/8" x 3/4" Meters<br />
Straight and angle valves are available for the yokebox inlet and outlet, 8" bury<br />
is standard. Angle valves are 60° from horizontal. Straight back flow or connection<br />
outlets are available. Cast iron base keeps out dirt, mud, and pests,<br />
resulting in a cleaner meter. Holes in the base provide drainage.<br />
Cast iron base, upper section, and lid are black dip coated to prevent rust.<br />
Expansion connection and gaskets are also included with package. Designed<br />
for use with above or below ground potable water applications with temperature<br />
range of 34º -100ºF.<br />
A standard fully assembled yokebox includes:<br />
- Cast Iron Base<br />
- 5/8" x 3/4" meter standard<br />
- Upper Section (Cast Iron or Plastic)<br />
- Cast Iron Locking lid standard<br />
- Lockless and Plastic lid available<br />
- Inlet and Outlet Connection<br />
- Shallow center line of meter 8" below grade<br />
11 "<br />
7 1/8"<br />
5 5/8" x 9 1/8"<br />
Opening<br />
10 1/2"<br />
Approximate<br />
Dimensions<br />
40 ° 40°<br />
8" Bury<br />
T op to centerline<br />
of meter<br />
NOTE: All combinations may not be<br />
available with all models. Contact<br />
factory for further information.<br />
LID OPTIONS<br />
For custom logo lids, contact factory.<br />
Cast Iron Locking Lid - standard<br />
Also available: lockless lid, or<br />
meter reading lid.<br />
75L1 - Lockless<br />
5/8” or 5/8” x 3/4” meter<br />
Plug valves (60°<br />
angle or straight)<br />
are available on<br />
the inlet and outlet.<br />
75L2 - Locking (standard)<br />
Service line connection,<br />
backflow, or outlet<br />
valves are available.<br />
OUTLET<br />
75L3 - Locking w/2" Hole<br />
INLET<br />
Expansion connection<br />
makes meter<br />
changeouts easy.<br />
Base keeps out dirt<br />
and pests. Holes<br />
provide drainage.<br />
75L6 - Locking w/Flip-Lid<br />
4 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
11-12
Series 775 Yokebox<br />
NOTE: All combinations may not be<br />
available with all models. Contact<br />
factory for further information.<br />
To order Yoke Boxes - Model No. 775-208LCCG 332 X 800 means:<br />
775 - 2 08 L C C G 3 3 2 X 800 X 930<br />
Series<br />
775-Yokebox<br />
Style<br />
– = Standard<br />
P = Plastic upper<br />
section<br />
Meter Size<br />
1 = 5/8" (w/ 2<br />
10J12 adapters)<br />
2 = 5/8" x 3/4"<br />
Meter Depth<br />
05 = 5" Cast iron upper<br />
section<br />
08 = 8" Cast iron or<br />
plastic upper<br />
section<br />
10 = 10" Cast iron<br />
upper section<br />
NOTE: For 4" plastic riser, add<br />
04" to meter depth<br />
INLET OUTLET INLET OUTLET<br />
Inlet and Outlet Valves<br />
A = Angle Ball Valve<br />
B = Straight Ball Valve<br />
C = Straight connection outlet<br />
D = Straight dual check<br />
L = Angle plug valve<br />
P = Straight plug valve<br />
Blank<br />
Space<br />
Size-Inlet and<br />
Outlet<br />
3 = 3/4"<br />
4 = 1"<br />
Type of connection - Inlet and Outlet<br />
Angle Ball Valve<br />
B = 3/4" -3G PEP Compression<br />
G = 3/4" FNPT<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Straight Ball Valve<br />
B = 3/4" -3G PEP Compression<br />
C = 3/4" Copper Flare<br />
D = 3/4" Dual Purpose<br />
G = 3/4" FNPT Integral<br />
H = 3/4" Copper Flare less flare nut<br />
M = 3/4" or 1" MNPT Union<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Straight Connection<br />
B = 3/4" -3G PEP Compression<br />
G = 3/4" FNPT<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Straight Dual Check<br />
G = 3/4" FNPT<br />
Q = 3/4" Q CTS Compression<br />
T = 3/4" T CTS Compression<br />
V = 3/4" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
2 = 3/4" -22 CTS Compression<br />
Type of Lid<br />
800 = Plastic lid<br />
801 = Plastic lid<br />
with reader<br />
mount<br />
Type of Lid<br />
1 = Lockless lid<br />
2 = Locking lid (standard)<br />
3 = Locking lid with 2" dia. hole<br />
4 = Locking lid with removable<br />
2" dia. plug<br />
5 = Lockless lid with 2" dia. hole<br />
6 = Locking lid with flip lid<br />
7 = Lockless lid with removable<br />
2" plug<br />
5/8" or 5/8" x 3/4" Meters<br />
PLASTIC LID OPTIONS<br />
Angle Plug Valve<br />
B = 3/4" -3G PEP Compression<br />
C = 3/4" Copper Flare<br />
G = 3/4" FNPT<br />
H = 3/4" Copper Flare less flare nut<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Straight Plug Valve<br />
B = 3/4" -3G PEP Compression<br />
C = 3/4" Copper Flare<br />
D = 3/4" Dual Purpose<br />
G = 3/4" FNPT Integral<br />
H = 3/4" Copper Flare less flare nut<br />
M = 3/4" MNPT Union<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
SERIES 775<br />
UFR<br />
900 = Single Volumetric<br />
UFR Expander<br />
901 = Single Volumetric<br />
UFR-NCV Expander<br />
902 = Single Multijet<br />
UFR Expander<br />
903 = Single Multijet<br />
UFR-NCV Expander<br />
930 = Inline UFR Dual<br />
Check for<br />
Volumetric Meter<br />
940 = Inline UFR Dual<br />
Check for<br />
Multijet Meter<br />
11-12 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
5
Series 775 Yokebox<br />
SERIES 775<br />
1" Meters<br />
Straight Ball Valves are standard on the 1" yokebox inlet, 10" bury is standard.<br />
Cast Iron base keeps out dirt, mud, and pests, resulting in a cleaner meter.<br />
Holes in the base provide drainage.<br />
Cast iron base, upper section, and lid are black dip coated to prevent rust.<br />
Expansion connection and gaskets are also included with package. Designed<br />
for use with above or below ground potable water applications with temperature<br />
range of 34º - 100ºF.<br />
A standard fully assembled yokebox includes:<br />
- Cast Iron Housing Construction<br />
- Locking Cast Iron Lid<br />
- 1" Ball Style Inlet Valve with FNPT<br />
- Straight Outlet with 1" FNPT<br />
LID OPTIONS<br />
For custom logo lids, contact factory.<br />
10.7” Opening<br />
75L41 - Lockless<br />
CAST IRON<br />
LOCKING LID<br />
75L42 - Locking (standard)<br />
Cast Iron<br />
Upper<br />
Section<br />
10” Meter<br />
Centerline to<br />
Grade Level<br />
75L43 - Locking w/2" hole<br />
Ball<br />
Valve<br />
Yoke<br />
Expander<br />
75L45 - Lockless, 2" hole<br />
6 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
11-12
Series 775 Yokebox<br />
SERIES 775<br />
1" Meters<br />
To order 1" Yoke Box - Model No. 775-410BCGG 442 means:<br />
775 - 4 10 B C G G 4 4 2<br />
Series<br />
775-Yokebox<br />
Style<br />
– = Standard<br />
Meter Size<br />
4 = 1" Meter<br />
Meter Depth<br />
10 = 10" Cast iron<br />
upper section<br />
INLET OUTLET<br />
Inlet and Outlet Valves<br />
B = Straight Ball Style<br />
Inlet Valve<br />
C = Straight connection<br />
outlet<br />
INLET OUTLET<br />
Type of connection-<br />
Inlet and Outlet<br />
Straight Connection<br />
G = 1" FNPT<br />
Blank<br />
Space<br />
Size-Inlet and<br />
Outlet<br />
4 = 1"<br />
Type of Lid<br />
1 = Lockless lid<br />
2 = Locking lid (standard)<br />
3 = Locking lid with 2"<br />
dia. hole<br />
4 = Locking lid with<br />
2" dia. hole with<br />
removable plug<br />
5 = Lockless lid with<br />
2" dia. hole<br />
7 = Lockless lid with<br />
2" dia. hole with<br />
removable plug<br />
11-12 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
7
Series 776 Longbox<br />
SERIES 776<br />
5/8" or 5/8" x 3/4" Meters<br />
Straight or angle valves are available for the longbox inlet and outlet, 8"<br />
bury is standard. Angle valves are 60° from horizontal. Straight connection<br />
outlets are also available.<br />
Cast iron base keeps out dirt, mud, and pests, resulting in a cleaner meter.<br />
Holes in the base provide drainage. Cast iron base, upper section, and lid<br />
are black dip coated to prevent rust. Expansion connection, gaskets, and<br />
ASSE 1024 inline dual check valve are included with package.<br />
Designed for use with above or below ground potable water<br />
applications with temperature range of 34º -100ºF.<br />
A standard fully assembled longbox includes:<br />
- Cast Iron Base<br />
- 5/8" x 3/4" meter standard<br />
- Upper Section (Cast Iron or Plastic)<br />
- Cast Iron Locking lid standard<br />
- Lockless and Plastic lid available<br />
- Inlet and Outlet Connection<br />
- Shallow center line of meter 8" below grade<br />
11 "<br />
7 1/8"<br />
5 5/8" x 12 7/8"<br />
Opening<br />
14 1/2"<br />
Approximate<br />
Dimensions<br />
Approximate<br />
Dimensions<br />
8"<br />
T op to centerlin e<br />
of meter<br />
NOTE: All combinations may not be<br />
available with all models. Contact<br />
factory for further information.<br />
40°<br />
40° with angle valve<br />
LID OPTIONS<br />
For custom logo lids, contact factory.<br />
76L1 - Lockless<br />
Cast iron locking lid - standard<br />
Also available: lockless lid, or<br />
meter reading lid.<br />
5/8” or 5/8” x 3/4” meter<br />
76L2 - Locking (standard)<br />
Plug (60° angle or<br />
straight) or ball<br />
valves (straight)<br />
are available on<br />
the inlet and outlet.<br />
Service line<br />
connections or<br />
outlet valves are<br />
both available.<br />
76L3 - Locking w/2" Hole<br />
OUTLET<br />
INLET<br />
Expansion connection<br />
makes meter<br />
changeouts easy.<br />
Base keeps out dirt<br />
and pests. Holes<br />
provide drainage.<br />
ASSE approved<br />
inline dual check,<br />
completely inside<br />
the box.<br />
76L5 - Lockless w/2" Hole<br />
8 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
11-12
Series 776 Longbox<br />
SERIES 776<br />
5/8" or 5/8" x 3/4" Meters<br />
Style<br />
– = Standard<br />
P = Plastic upper<br />
section<br />
To order Long Boxes - Model No. 776-208LCCG 332 X 800 means:<br />
776 - 2 08 L C C G 3 3 2 X 800 X 930<br />
Series<br />
776-Longbox<br />
Meter Size<br />
1 = 5/8" (w/two<br />
10J12 adapters)<br />
2 = 5/8" x 3/4"<br />
Inlet and Outlet Valves<br />
A = Angle ball valve<br />
B = Straight ball valve<br />
C = Straight connection outlet<br />
L = Angle plug valve<br />
P = Straight plug valve<br />
Meter Depth<br />
08 = Cast iron or<br />
plastic upper<br />
section<br />
12 = Cast iron or<br />
plastic upper<br />
section with 4"<br />
plastic extension<br />
(long box only)<br />
INLET OUTLET INLET OUTLET<br />
Blank<br />
Space<br />
Size-Inlet<br />
and Outlet<br />
3 = 3/4"<br />
4 = 1"<br />
Type of connection - Inlet and Outlet<br />
Angle Ball Valve<br />
B = 3/4" -3G PEP Compression<br />
C = 3/4" Copper Flare<br />
G = 3/4" FNPT<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Type of Lid<br />
800 = Plastic lid<br />
801 = Plastic<br />
lid with reader<br />
mount bracket<br />
Type of Lid<br />
1 = Lockless lid<br />
2 = Locking lid (standard)<br />
3 = Locking lid with 2" dia. hole<br />
4 = Locking lid with removable<br />
2" dia. plug<br />
5 = Lockless lid with 2" dia. hole<br />
7 = Lockless lid with removable<br />
2" plug<br />
PLASTIC LID OPTIONS<br />
UFR<br />
900 = Single Volumetric<br />
UFR Expander<br />
901 = Single Volumetric<br />
UFR-NCV Expander<br />
902 = Single Multijet<br />
UFR Expander<br />
903 = Single Multijet<br />
UFR-NCV Expander<br />
930 = Inline UFR Dual<br />
Check for<br />
Volumetric Meter<br />
940 = Inline UFR Dual<br />
Check for<br />
Multijet Meter<br />
NOTE: All combinations may not be<br />
available with all models. Contact<br />
factory for further information.<br />
OPTIONS<br />
- For Handyloc - Replace "Q" or "-3Q"<br />
with "H" or "-3H" in 3/4" & 1" only.<br />
Straight Ball Valve<br />
B = 3/4" -3G PEP Compression<br />
C = 3/4" Copper Flare<br />
D = 3/4" Dual Purpose<br />
G = 3/4" FNPT Integral<br />
H = 3/4" Copper Flare less flare nut<br />
M = 3/4" or 1" MNPT Union<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Straight Connection<br />
B = 3/4" -3G PEP Compression<br />
G = 3/4" FNPT<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Angle Plug Valve<br />
B = 3/4" -3G PEP Compression<br />
C = 3/4" Copper Flare<br />
G = 3/4" FNPT<br />
H = 3/4" Copper Flare less flare nut<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
76L2 X800<br />
Angle Plug Valve - continued<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
Straight Plug Valve<br />
B = 3/4" -3G PEP Compression<br />
C = 3/4" Copper Flare<br />
D = 3/4" Dual Purpose<br />
G = 3/4" FNPT Integral<br />
H = 3/4" Copper Flare less flare nut<br />
M = 3/4" MNPT Union<br />
Q = 3/4" or 1" Q CTS Compression<br />
T = 3/4" or 1" T CTS Compression<br />
V = 3/4" or 1" G CTS Compression<br />
W = 3/4" or 1" H CTS Compression<br />
Y = 3/4" -3H PEP Compression<br />
Z = 3/4" -3Q PEP Compression<br />
2 = 3/4" or 1" -22 CTS Compression<br />
3 = 3/4" -33 PEP Compression<br />
4 = 3/4" -44 PVC Compression<br />
5 = 3/4" -55 IP Compression<br />
11-12 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
9
Series 777 "CR" Box<br />
SERIES 777<br />
5/8", 5/8" x 3/4", 3/4", or 1" Meters<br />
A.Y. McDonald Mfg. 777-Series meter box offers versatility in design and adaptability in service line connections. Adjustable to<br />
unexpected grade changes and service line specifications. The 777 Series provides a protective cast iron housing for water meters<br />
to one inch size and service line depths of 11 – 20”. Options are available including integral compression on 5/8" and 5/8" x 3/4"<br />
sizes, connection adapters, non-locking lids, lids for radio and touch read technology, and stationary non-adjustable top sections.<br />
Designed for use with above or below ground potable water applications with temperature range of 34º - 100ºF. Brass conforms<br />
to AWWA C800 Latest Revisions.<br />
Drainage Holes in Base Casting. Cast iron base, upper section,<br />
and lid are black dip coated to prevent rust.<br />
A standard fully assembled "CR" Meter Box package includes:<br />
- Cast Iron Housing Construction<br />
- Adjustable Top Section<br />
- 300 PSI rated Ball Style Inlet Valve<br />
- Female Pipe Thread Connections<br />
- Integral Expansion Connection to the Meter<br />
Locking Lid<br />
Outer Barrel - Adjustable<br />
Inner Barrel - Adjustable<br />
Adapter Ring<br />
Top View<br />
15”<br />
Minimum<br />
Inlet<br />
Outlet<br />
1 Expander w/1” FNPT Outlet<br />
1 Ball Valve w/1” FNPT Inlet<br />
Base Tray w/Drain Holes<br />
1" 777 SERIES "CR" BOX SHOWN<br />
10 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
11-12
Series 777 "CR" Box<br />
SERIES 777<br />
5/8", 5/8" x 3/4", 3/4", or 1" Meters<br />
To order Long Boxes - Model No. 77R211BCCG 332 means:<br />
77 R 2 11 B C G G 3 3 2<br />
Series<br />
777-Series<br />
5/8" & 5/8" x 3/4" Meter 3/4" Meter 1" Meter<br />
Meter Size<br />
1 = 5/8" Meter<br />
2 = 5/8" x 3/4" Meter<br />
3 = 3/4" Meter<br />
4 = 1" Meter<br />
INLET OUTLET<br />
Inlet and Outlet Valves<br />
B = Straight ball valve<br />
C = Straight connection<br />
outlet<br />
INLET OUTLET<br />
Blank<br />
Space<br />
Size-Inlet<br />
and Outlet<br />
3 = 3/4"<br />
4 = 1"<br />
Type of Lid<br />
1 = Lockless lid<br />
2 = Locking lid (standard)<br />
Style<br />
– = Non - Adjustable<br />
Upper Section<br />
R = Rotational Upper<br />
Section<br />
NOTE: All combinations may not be<br />
available with all models. Contact<br />
factory for further information.<br />
Minimum<br />
Meter Depth<br />
11 = 5/8" & 5/8" x 3/4"<br />
14 = 3/4"<br />
15 = 1"<br />
Type of connection-<br />
Inlet and Outlet<br />
G = 3/4" or 1" FNPT<br />
Q = 3/4" Q CTS Compression<br />
T = 3/4" T CTS Compression<br />
V = 3/4" G CTS Compression<br />
W = 3/4" H CTS Compression<br />
2 = 3/4" -22 CTS Compression<br />
OPTIONS<br />
- For Handyloc - Replace "Q" with "H" in 3/4" & 1" only.<br />
11-12 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
11
Accessories & Lids<br />
Accessories & Lids<br />
Longbox<br />
Yokebox<br />
Parts & Accessories<br />
Iron Upper Section<br />
Longbox - 8" only available.<br />
Yokebox - 5", 8", or 10" available.<br />
76-US08 (Iron)<br />
75-US08 (Iron)<br />
Plastic Upper Section - Add "P" to model number in place<br />
of "-". 8" only available.<br />
4" Plastic riser adds 4" to meter depth in model number.<br />
For use with Cast Iron or Plastic upper section.<br />
76PUS08 (Plastic)<br />
75PUS08 (Plastic)<br />
Concrete Anchor Flange allows the Cast Iron Longbox to be<br />
securely anchored into concrete.<br />
4" Riser<br />
76PEX04 = Plastic<br />
76-EX04 = Cast Iron<br />
76-2CF<br />
Concrete Anchor Flange<br />
75PEX04<br />
4" Plastic Riser<br />
75GA<br />
Grade Adjuster<br />
Grade Adjuster allows 1 1/2" to 3" of height adjustment to<br />
the 775 series Cast Iron Yokebox. Includes hardware.<br />
14-2G - Gasket<br />
76PEXS - Screw package works on 75 & 76 4" Plastic riser.<br />
76-2J - Long box idler<br />
76-2JA - Sub assy/Long box hardware<br />
(Expander, idler and gaskets)<br />
76-2SA - Sub assy/Long box hardware<br />
(Expander, dual check and gaskets)<br />
75Key<br />
Works on both<br />
Yoke and Long Boxes<br />
75LP Lock Plate<br />
10J12 Adapters<br />
For conversion of 5/8" Meter to<br />
5/8" x 3/4" Meter<br />
714-2EHG<br />
Expansion Connection<br />
74MCIPL 2" Plug<br />
75-ERT<br />
ERT Mounting Cartridge<br />
for Plastic Lids<br />
WARNING: It is unlawful in CALIFORNIA & VERMONT (effective 1/1/2010); MARYLAND (effective 1/1/2012); LOUISIANA (effective 1/1/2013) and the UNITED STATES<br />
OF AMERICA (effective 1/4/2014) to use any product in the installation or repair of any public water system or any plumbing in a facility or system that provides water for human<br />
consumption if the wetted surface area of the product has a weighted average lead content greater than 0.25%. This prohibition does not extend to service saddles used in<br />
California, Louisiana or under USA Public Law 111-380.<br />
12 800.292.2737 | FAX 800.832.9296 | sales@aymcdonald.com | aymcdonald.com<br />
11-12