Gyro Compass Std 22 Installation and Service Manual(VER MAR

Installation and Service manual
Compass STD 22 Compact
-- Push the components of the screw fastening over the cable.
It is essential to follow the sequence (as shown in Figure 3).
-- Check the cone and the mating piece of the earthing insert for corrosion and
if necessary remove corrosion with an emery cloth.
-- Push the mating piece of the earthing insert to the end of the cable sheath.
-- Push the cone inside the screening and against the mating piece. Ensure
that the screening is evenly distributed over the cone (see Figure 3).
Wall an DIN cap
Earthing insert
-- Cone
-- Mating piece
Seal
+ Strain relief
Screening
Washer
Counter nut
Figure 3:
Creating the cable connection
3646/110--233.DOC010302
18
Edition: May 20, 2005