Enclosure Catalogue

Spacial SBM
Steel industrial boxes
Fixing accessories
PB502098-7
PB502104-6
PB502102-12
PB502105-7
PB502106-5
PB502103-13
Fixing lugs
Wall-fixing lugs to be
mounted directly on the
rear of the box, either in
horizontal or vertical
position. Their versatile
design complies with the
fixing dimensions of
many other enclosures.
Self-tapping
screws
Self-tapping, Pozidriv
head, screws, for Ø 5 mm
holes.
Hinges (3)
The hinges allow the
cover to open to more
than 180°.
They can be installed on
all covers in the range.
Double-bar
shaped head
screw
Triangle
shaped head
screw
The standard Pozidriv head screws can be replaced
with the Double-bar or Triangle shaped head screws,
to discourage unauthorised opening of the cover with
normal screwdrivers.
- - - - Green
- - IP66 IP66 IP66
Horizontal or vertical
position, distance
between wall and
enclosure: 10 mm, only
requires a screw driver
- bb
The box must be
drilled before installing
the 2 hinges on the body.
3 hinges are required for
boxes of width more than
500 mm
bb
A specific mark on the
body helps to locate
where the hole should be
drilled
70 kg - 30 kg/m² on the hinged
cover
4 wall-fixing lugs, screws 100 units 6 hinges delivered with
and pre-mounted sealing
fixings
gaskets
Simply replace the standard
screw on the box
- -
1 unit 1 unit
Sealing kit
The sealing kit helps to
set up a lead-sealed wire
for safety traceability of
cover opening.
Replaces the standard
sealing washer on the
box
NSYAEFPFSB* NSYAMFSB* NSYAEDHSB* NSYAEDSBSB* NSYAEDSTSB* NSYPPSB*
(3) Standard equipped in Bus box.
* Same reference for all dimensions.
47