TELEMA TICS ENGINEERING - Kronos Electric
TELEMA TICS ENGINEERING - Kronos Electric
TELEMA TICS ENGINEERING - Kronos Electric
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Kem10 _tecHnical cHaracteristics<br />
HarDWare<br />
Quad-band GSM / GPRS<br />
Power supply: 8 ÷ 36V (6 ÷ 24V )<br />
DC AC<br />
Consumption @ 13.2V:<br />
On call (GSM pwr. lev. 5): 120mA<br />
Idle (GSM registered): 35mA<br />
Integrated Li-Ion battery of 750mAh (optional)<br />
Led status indicator<br />
Movement sensor<br />
3-axes accelerometer, ±6g (optional)<br />
Dimensions (L x H x W): 82 x 22 x 50mm<br />
Weight: 105g<br />
interFaces<br />
4 digital 3-state inputs<br />
2 relays<br />
1 digital output<br />
1 LED output<br />
1 serial port (RX, TX, GND, V ) dc<br />
1 I2C port<br />
SMA type antenna connector<br />
sOFtWare<br />
Customisable<br />
Kit<br />
KeM10 modem<br />
GSM antenna<br />
220V power supply<br />
I/O cabling<br />
Serial cable<br />
Fixing kit<br />
iBa10<br />
rs232 / 1-Wire bus interface<br />
The IBA10 interfaces 1-Wire bus<br />
devices to KEM10<br />
Hardware Dimensions (L x H x W): 42 x 12 x 10mm • Weight: 5g<br />
Interfaces 2-pin microfit connector for connecting to the 1-Wire device<br />
• 4-pin microfit connector for connecting to the KeM10<br />
Kit IBA10 interface • Connecting cable for KeM10<br />
KtX01<br />
radiofrequency remote control<br />
Hardware Power supply: 3V lithium battery (CR2032 type)<br />
Dimensions (L x H x W): 30 x 63 x 9mm • Weight: 15g<br />
Interfaces 2 function buttons • 1 led status indicator<br />
KtX02<br />
mobile part of the radiofrequency<br />
transponder<br />
The KTX02 periodically transmits an<br />
identity code via radiofrequency. Coupled<br />
to the fixed part KRX02 it allows checking<br />
the proximity of the mobile part to the fixed<br />
one.<br />
Hardware Power supply: 3V lithium battery (CR2032 type)<br />
• Dimensions (L x H x W): 30 x 63 x 9mm • Weight: 15g<br />
Interfacce 2 function buttons • 1 led status indicator<br />
KeX10<br />
i/O and port expander for Kem10<br />
Hardware Dual power supply: independent: 8 ÷ 36VDC (6 ÷ 24VAC),<br />
supplied from KeM10 • LED status indicator • Dimensions<br />
(L x H x W): 82 x 22 x 50mm • Weight: 95g<br />
Interfaces 4 digital 3-state inputs • 1 frequency input<br />
• 1 counter input •1 analogue input • 2 current loop inputs (4-20mA)<br />
• 4 relays • 1 digital output • 2 serial ports • 1 I2C port<br />
• 1 1-Wire bus port • 868MHz OOK transceiver (optional)<br />
Kit KeX10 expander • I/O cabling of 2.5m • 1m cabling for connection to<br />
KeM10 • Fixing kit<br />
KrX02<br />
radiofrequency receiver for Kem10<br />
Permits the coupling of remote controller KTX01<br />
and/or the mobile part of the transponder KTX02<br />
to the KeM10 industrial modem.<br />
Hardware Dimensions (L x H x W): 35 x 48 x 14mm<br />
(excluding cable) • Weight: 25g<br />
Interfaces USB cable for connection to the KeM10.<br />
extension cable for gsm antenna<br />
5m extension cable for the distancing of the<br />
GSM antenna of the KeM10 industrial modem.<br />
Kem10 _ accessOries<br />
<strong>TELEMA</strong><strong>TICS</strong> <strong>ENGINEERING</strong>
Change language